WTB Rear Cross member 72 SWB 4x4 Frame - The 1947 - Present Chevrolet & GMC Truck Message Board Network

akcheyenne · 09-28-2003, 03:28 AM

Rear cross member on frame is bent. I am willing to pay freight to Alaska. Any help would be appreciated.

LeRoy · 09-28-2003, 04:01 AM

Which crossmember? I'm cutting up a frame soon

akcheyenne · 09-28-2003, 01:12 PM

Leroy, It is the last crossmember on the frame. The one directly behind the leaf spring hanger on the shortbed.

Class of 69 · 09-28-2003, 09:23 PM

I have a 2 wd LWB leaf spring frame. Is the cross member the same?

akcheyenne · 09-28-2003, 09:37 PM

I am not sure on the rear I know the front width is different.

LeRoy · 09-29-2003, 01:03 AM

I've got a 69 shorty 4x4 and I'll compare it to the one on the 3/4 ton frame and see if they're the same

akcheyenne · 09-29-2003, 01:08 AM

Thanks for the help Leroy.

imdarren · 09-29-2003, 07:51 PM

LeRoy,
I have a K20 Cheyenne Super that needs that back cross member as well. If it wont fit on the 1/2 ton previously posted above. I'll take it. I'll even drive up there and get it.
Mine is bent as well. It was that way when I bought the truck.
Some folks really bet the H&!! out of these rigs. LOL!
Thanks!

Actually. I already measured against my 1/2 ton. The 1/2 ton is about 1/4 inch shorter if I measured correctly. The 3/4 ton has a taller frame I belive.
Someone correct me if I'm wrong.
Also looking for some factory 8 lug steel wheels if you have any LeRoy.

Darren

HeavyK20 · 09-29-2003, 09:55 PM

LeRoy,
I need the cross member that goes between the front spring hangers on the rear axle. If yours frame is a 69-72 4x4 and the cross member is in good shape we should talk.

LeRoy · 09-30-2003, 12:18 AM

Okay guys. Did some measuring and mine won't work for either of you. I do know that 72BOB is cutting up a 68 4x4 1/2 ton and his should work for you. Nice guy except that he's a closet Ford fan. Imdarren: I don't have any of those wheels anymore but will keep an eye out. I did find a truck in Marysville that had them but didn't ask if it was for sale. He had a few other wrecks he was trying to sell and was asking way too much so I didn't bother.

akcheyenne · 09-30-2003, 12:43 AM

Thanks for checking Leroy. I appreciate the effort.

LeRoy · 09-30-2003, 10:17 AM

No problem, PM 72BOB and I'll call him to see what's going on

72Bob · 09-30-2003, 10:57 AM

AKCheyenne:
The rear one is the only crossmember left uncut on my 68 4x4, I will take a pic tonight and email it to you. fireball@fidalgo.net

Leroy, When do you want this 68 rear end? and do you want me to clean the cow s@#t off it?

Always looking for 64-65 Falcons or Comets.....

akcheyenne · 09-30-2003, 02:58 PM

72bob Thanks that would be great. AKNELS@aol.com

09-28-2003, 03:28 AM	#1
akcheyenne Registered User Join Date: Dec 2001 Location: Anchorage, AK Posts: 23	WTB Rear Cross member 72 SWB 4x4 Frame Rear cross member on frame is bent. I am willing to pay freight to Alaska. Any help would be appreciated.

09-28-2003, 04:01 AM	#2
LeRoy Registered truck nut Join Date: Dec 1999 Location: Mt. Vernon, Washington, USA Posts: 1,584	Which crossmember? I'm cutting up a frame soon __________________ MOUNT VERNON, WASH. STATE Need a part? Just PM me

09-28-2003, 09:23 PM	#4
Class of 69 Registered User Join Date: Mar 2003 Location: Stillwater MN Posts: 1,166	I have a 2 wd LWB leaf spring frame. Is the cross member the same? __________________ 69 GMC K10 ..some restoration required....still..

09-28-2003, 09:37 PM	#5
akcheyenne Registered User Join Date: Dec 2001 Location: Anchorage, AK Posts: 23	I am not sure on the rear I know the front width is different. __________________ 72 SWB Cheyenne 4x4 in progress 72 Blazer 4x4 Almost Done 72 blazer 4x4 for parts 71 blazer for parts

09-29-2003, 01:03 AM	#6
LeRoy Registered truck nut Join Date: Dec 1999 Location: Mt. Vernon, Washington, USA Posts: 1,584	I've got a 69 shorty 4x4 and I'll compare it to the one on the 3/4 ton frame and see if they're the same __________________ MOUNT VERNON, WASH. STATE Need a part? Just PM me

09-28-2003, 01:12 PM	#3
akcheyenne Registered User Join Date: Dec 2001 Location: Anchorage, AK Posts: 23	Leroy, It is the last crossmember on the frame. The one directly behind the leaf spring hanger on the shortbed.

09-29-2003, 01:08 AM	#7
akcheyenne Registered User Join Date: Dec 2001 Location: Anchorage, AK Posts: 23	Thanks for the help Leroy. __________________ 72 SWB Cheyenne 4x4 in progress 72 Blazer 4x4 Almost Done 72 blazer 4x4 for parts 71 blazer for parts

09-29-2003, 07:51 PM	#8
imdarren Registered User Join Date: Oct 2001 Location: SW Washington Posts: 1,006	LeRoy, I have a K20 Cheyenne Super that needs that back cross member as well. If it wont fit on the 1/2 ton previously posted above. I'll take it. I'll even drive up there and get it. Mine is bent as well. It was that way when I bought the truck. Some folks really bet the H&!! out of these rigs. LOL! Thanks! Actually. I already measured against my 1/2 ton. The 1/2 ton is about 1/4 inch shorter if I measured correctly. The 3/4 ton has a taller frame I belive. Someone correct me if I'm wrong. Also looking for some factory 8 lug steel wheels if you have any LeRoy. Darren __________________ Washington State 1967 Chevy C10 LWB Rodstoration In Progress. 1972 K20 Cheyenne Super Last edited by imdarren; 09-29-2003 at 07:54 PM.

09-29-2003, 09:55 PM	#9
HeavyK20 Registered User Join Date: Dec 2001 Location: New Richmond, WI Posts: 547	LeRoy, I need the cross member that goes between the front spring hangers on the rear axle. If yours frame is a 69-72 4x4 and the cross member is in good shape we should talk. __________________ Eric 1969 K20, 465/205 package

09-30-2003, 12:18 AM	#10
LeRoy Registered truck nut Join Date: Dec 1999 Location: Mt. Vernon, Washington, USA Posts: 1,584	Okay guys. Did some measuring and mine won't work for either of you. I do know that 72BOB is cutting up a 68 4x4 1/2 ton and his should work for you. Nice guy except that he's a closet Ford fan. Imdarren: I don't have any of those wheels anymore but will keep an eye out. I did find a truck in Marysville that had them but didn't ask if it was for sale. He had a few other wrecks he was trying to sell and was asking way too much so I didn't bother. __________________ MOUNT VERNON, WASH. STATE Need a part? Just PM me

09-30-2003, 12:43 AM	#11
akcheyenne Registered User Join Date: Dec 2001 Location: Anchorage, AK Posts: 23	Thanks for checking Leroy. I appreciate the effort. __________________ 72 SWB Cheyenne 4x4 in progress 72 Blazer 4x4 Almost Done 72 blazer 4x4 for parts 71 blazer for parts

09-30-2003, 10:17 AM	#12
LeRoy Registered truck nut Join Date: Dec 1999 Location: Mt. Vernon, Washington, USA Posts: 1,584	No problem, PM 72BOB and I'll call him to see what's going on __________________ MOUNT VERNON, WASH. STATE Need a part? Just PM me

09-30-2003, 10:57 AM	#13
72Bob Registered User Join Date: Sep 2002 Location: Burlington, WA Posts: 298	Rear Cross AKCheyenne: The rear one is the only crossmember left uncut on my 68 4x4, I will take a pic tonight and email it to you. fireball@fidalgo.net Leroy, When do you want this 68 rear end? and do you want me to clean the cow s@#t off it? Always looking for 64-65 Falcons or Comets.....

09-30-2003, 02:58 PM	#14
akcheyenne Registered User Join Date: Dec 2001 Location: Anchorage, AK Posts: 23	72bob Thanks that would be great. AKNELS@aol.com __________________ 72 SWB Cheyenne 4x4 in progress 72 Blazer 4x4 Almost Done 72 blazer 4x4 for parts 71 blazer for parts



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.