|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
07-04-2019, 06:47 PM
|
#1 |
|
Registered User
Join Date: Jun 2006
Location: Lutz, Florida
Posts: 838
|
1967 C50 pickup - finally starting to paint
It has been a long road for my 67 C50 but finally getting paint on the primer.
Started out as a farm flat bed, shorted the frame and added a 92 TopKick rear frame from cab back to get the 10 lug axle. Freightliner front axle gave me huge 4 wheel disk brakes. Super singles in the rear are covered by C60 front fenders flipped L side on R rear... Double din now in the dash along with some AC vents, I deleted the dash pad also Small block is gone and an old Detroit Diesel is going in. Firewall has been smoothed out and the firewall gutter cut off. The fuel fill is in the standard place but the hose goes through the cab and through the floor into a tank All the work and painting is done by me outside under a canopy in sunny Florida
__________________
1967 Red, C10 Short Bed 6.0L T5 5 speed 1967 Orange and Black C50 6.2 Detroit Diesel NV4500, 2 Ton Pickup 1972 White, Chevy Blazer 2WD 67 Dog house 5.3 4L65 2016 Power Tour LH 1955 Red-Cream, Chevrolet Nomad, restoration on hold 2004 Black, Corvette Z06 LS6 convertible (Rock solid Fun) 2011/2018 Power Tour |
|
|
|
07-04-2019, 10:35 PM
|
#2 |
|
Registered User
Join Date: Oct 2009
Location: canton ga
Posts: 12,728
|
Re: 1967 C50 pickup - finally starting to paint
Damn , that is looking great .
|
|
|
|
|
07-04-2019, 11:48 PM
|
#3 |
|
Senior Member
 
Join Date: Dec 2009
Location: TN.
Posts: 8,329
|
Re: 1967 C50 pickup - finally starting to paint
I like it.
I have always liked those running boards on the big trucks. .
__________________
________________________________________________________________________________________ ____________________________________________ 84 Chevy K-20 63 Impala (my high school car) http://67-72chevytrucks.com/vboard/s...Crew Cab Build |
|
|
|
|
07-05-2019, 12:11 AM
|
#4 |
|
Registered User
Join Date: Jan 2003
Location: Safford,AZ
Posts: 3,612
|
Re: 1967 C50 pickup - finally starting to paint
How many gallons of paint?
|
|
|
|
|
07-05-2019, 06:59 AM
|
#5 |
|
Registered User
Join Date: Jun 2006
Location: Lutz, Florida
Posts: 838
|
Re: 1967 C50 pickup - finally starting to paint
I think two will be enough.
__________________
1967 Red, C10 Short Bed 6.0L T5 5 speed 1967 Orange and Black C50 6.2 Detroit Diesel NV4500, 2 Ton Pickup 1972 White, Chevy Blazer 2WD 67 Dog house 5.3 4L65 2016 Power Tour LH 1955 Red-Cream, Chevrolet Nomad, restoration on hold 2004 Black, Corvette Z06 LS6 convertible (Rock solid Fun) 2011/2018 Power Tour |
|
|
|
|
07-05-2019, 09:30 AM
|
#6 |
|
Registered User
Join Date: Nov 2009
Location: edinburg va
Posts: 115
|
Re: 1967 C50 pickup - finally starting to paint
I really like this build, I think the color choice is going to look great as well, great job,
|
|
|
|
|
07-05-2019, 09:50 AM
|
#7 | |
|
Registered User
Join Date: Jun 2006
Location: Lutz, Florida
Posts: 838
|
Re: 1967 C50 pickup - finally starting to paint
Quote:
__________________
1967 Red, C10 Short Bed 6.0L T5 5 speed 1967 Orange and Black C50 6.2 Detroit Diesel NV4500, 2 Ton Pickup 1972 White, Chevy Blazer 2WD 67 Dog house 5.3 4L65 2016 Power Tour LH 1955 Red-Cream, Chevrolet Nomad, restoration on hold 2004 Black, Corvette Z06 LS6 convertible (Rock solid Fun) 2011/2018 Power Tour |
|
|
|
|
|
07-09-2019, 07:41 AM
|
#8 |
|
Registered User
Join Date: Oct 2016
Location: Powderly Texas
Posts: 306
|
Re: 1967 C50 pickup - finally starting to paint
As others have said, it is looking really good! I really like the colors you have chosen, cannot wait to see it finished. Keep up the good work and progress!
|
|
|
|
|
11-27-2019, 11:00 PM
|
#9 | |
|
Registered User
Join Date: Jun 2006
Location: Lutz, Florida
Posts: 838
|
Re: 1967 C50 pickup - finally starting to paint
Quote:
__________________
1967 Red, C10 Short Bed 6.0L T5 5 speed 1967 Orange and Black C50 6.2 Detroit Diesel NV4500, 2 Ton Pickup 1972 White, Chevy Blazer 2WD 67 Dog house 5.3 4L65 2016 Power Tour LH 1955 Red-Cream, Chevrolet Nomad, restoration on hold 2004 Black, Corvette Z06 LS6 convertible (Rock solid Fun) 2011/2018 Power Tour |
|
|
|
|
|
07-09-2019, 11:00 AM
|
#10 |
|
Registered User
Join Date: May 2017
Location: Lexington SC
Posts: 119
|
Re: 1967 C50 pickup - finally starting to paint
Which Detroit Diesel did you go with?
|
|
|
|
|
07-09-2019, 07:40 PM
|
#11 |
|
Registered User
Join Date: Oct 2016
Location: Powderly Texas
Posts: 306
|
Re: 1967 C50 pickup - finally starting to paint
Got to know more about the Detroit Diesel? What transmission etc.....great build!
|
|
|
|
|
07-20-2019, 11:42 PM
|
#12 | |
|
Registered User
Join Date: Jun 2006
Location: Lutz, Florida
Posts: 838
|
Re: 1967 C50 pickup - finally starting to paint
Quote:
__________________
1967 Red, C10 Short Bed 6.0L T5 5 speed 1967 Orange and Black C50 6.2 Detroit Diesel NV4500, 2 Ton Pickup 1972 White, Chevy Blazer 2WD 67 Dog house 5.3 4L65 2016 Power Tour LH 1955 Red-Cream, Chevrolet Nomad, restoration on hold 2004 Black, Corvette Z06 LS6 convertible (Rock solid Fun) 2011/2018 Power Tour |
|
|
|
|
|
11-28-2019, 12:18 AM
|
#13 | |
|
Registered User
Join Date: May 2015
Location: Montana
Posts: 3,696
|
Re: 1967 C50 pickup - finally starting to paint
Quote:
Dang, it's been so long since I replaced the TO bearing in my old C-50, I don't remember much what it looked like except it was Big.
__________________
Current/past Chevy/GMC trucks: 1958 Chevy C-60; 1965 GMC C-50; 1965 Chevy C-10; 1971 Chevy K-10; 1973 Chevy K-20; 1976 GMC C-20; 1977 Chevy C-10 Suburban; 1980 Chevy K-10; 1989 Chevy K1500; 1991 GMC V1500 Suburban; 2016 Chevy K2500 HD Other vehicles: 1988 Jeep XJ; 2011 Toyota 4Runner |
|
|
|
|
|
11-28-2019, 09:42 AM
|
#14 | |
|
Registered User
Join Date: Jun 2006
Location: Lutz, Florida
Posts: 838
|
Re: 1967 C50 pickup - finally starting to paint
Quote:
__________________
1967 Red, C10 Short Bed 6.0L T5 5 speed 1967 Orange and Black C50 6.2 Detroit Diesel NV4500, 2 Ton Pickup 1972 White, Chevy Blazer 2WD 67 Dog house 5.3 4L65 2016 Power Tour LH 1955 Red-Cream, Chevrolet Nomad, restoration on hold 2004 Black, Corvette Z06 LS6 convertible (Rock solid Fun) 2011/2018 Power Tour |
|
|
|
|
|
07-20-2019, 11:44 PM
|
#15 | |
|
Registered User
Join Date: Jun 2006
Location: Lutz, Florida
Posts: 838
|
Re: 1967 C50 pickup - finally starting to paint
Quote:
__________________
1967 Red, C10 Short Bed 6.0L T5 5 speed 1967 Orange and Black C50 6.2 Detroit Diesel NV4500, 2 Ton Pickup 1972 White, Chevy Blazer 2WD 67 Dog house 5.3 4L65 2016 Power Tour LH 1955 Red-Cream, Chevrolet Nomad, restoration on hold 2004 Black, Corvette Z06 LS6 convertible (Rock solid Fun) 2011/2018 Power Tour |
|
|
|
|
|
07-13-2019, 11:38 AM
|
#16 |
|
Registered User
 Join Date: Jun 2017
Location: Temperance Michigan
Posts: 375
|
Re: 1967 C50 pickup - finally starting to paint
That thing is sexy even in primer!!
|
|
|
|
|
07-20-2019, 11:38 PM
|
#17 | |
|
Registered User
Join Date: Jun 2006
Location: Lutz, Florida
Posts: 838
|
Re: 1967 C50 pickup - finally starting to paint
Quote:
__________________
1967 Red, C10 Short Bed 6.0L T5 5 speed 1967 Orange and Black C50 6.2 Detroit Diesel NV4500, 2 Ton Pickup 1972 White, Chevy Blazer 2WD 67 Dog house 5.3 4L65 2016 Power Tour LH 1955 Red-Cream, Chevrolet Nomad, restoration on hold 2004 Black, Corvette Z06 LS6 convertible (Rock solid Fun) 2011/2018 Power Tour |
|
|
|
|
|
07-21-2019, 12:05 AM
|
#18 |
|
Registered User
Join Date: Jan 2003
Location: Safford,AZ
Posts: 3,612
|
Re: 1967 C50 pickup - finally starting to paint
Nice. Getting there!!
|
|
|
|
|
07-24-2019, 06:03 PM
|
#19 |
|
Registered User
Join Date: Dec 2017
Location: Nipomo, CA
Posts: 58
|
Re: 1967 C50 pickup - finally starting to paint
Looking good! Did you use an aftermarket firewall to shave all the holes/creases? Did you re-vulcanize your body mounts or use a different trucks rubber? It looks really clean!
__________________
1963 Olson Grumman Bread Van - Possible Suburban Swap (sporadically worked on to strip paint) 1969 GMC C10 Pickup SWB Stepside (heart transplant) 1969 Chevy C50 Fire Truck converted to Utility Truck being built into Pickup Truck (newest addition, accumulating spare parts) 1972 GMC K5 Blazer 4x4 (sporadically being worked on, accumulating parts) |
|
|
|
|
07-24-2019, 09:09 PM
|
#20 |
|
Registered User
Join Date: Jun 2006
Location: Lutz, Florida
Posts: 838
|
Re: 1967 C50 pickup - finally starting to paint
Did the firewall myself, just cut out metal to cover the old firewall. Cut off the gutter and filled in the top with a strip of 1.25" metal to fill the gap a long the top and the blower motor area. The body mounts were in good condition so I left them alone.
__________________
1967 Red, C10 Short Bed 6.0L T5 5 speed 1967 Orange and Black C50 6.2 Detroit Diesel NV4500, 2 Ton Pickup 1972 White, Chevy Blazer 2WD 67 Dog house 5.3 4L65 2016 Power Tour LH 1955 Red-Cream, Chevrolet Nomad, restoration on hold 2004 Black, Corvette Z06 LS6 convertible (Rock solid Fun) 2011/2018 Power Tour |
|
|
|
|
07-24-2019, 09:13 PM
|
#21 | |
|
Registered User
Join Date: Jun 2006
Location: Lutz, Florida
Posts: 838
|
Re: 1967 C50 pickup - finally starting to paint
Quote:
__________________
1967 Red, C10 Short Bed 6.0L T5 5 speed 1967 Orange and Black C50 6.2 Detroit Diesel NV4500, 2 Ton Pickup 1972 White, Chevy Blazer 2WD 67 Dog house 5.3 4L65 2016 Power Tour LH 1955 Red-Cream, Chevrolet Nomad, restoration on hold 2004 Black, Corvette Z06 LS6 convertible (Rock solid Fun) 2011/2018 Power Tour |
|
|
|
|
|
11-23-2019, 10:17 PM
|
#22 |
|
Registered User
Join Date: Sep 2019
Location: Smithsburg MD
Posts: 2
|
Re: 1967 C50 pickup - finally starting to paint
What kind of running boards are you using? Great looking truck!
|
|
|
|
|
11-27-2019, 10:48 PM
|
#23 | |
|
Registered User
Join Date: Jun 2006
Location: Lutz, Florida
Posts: 838
|
Re: 1967 C50 pickup - finally starting to paint
Quote:
__________________
1967 Red, C10 Short Bed 6.0L T5 5 speed 1967 Orange and Black C50 6.2 Detroit Diesel NV4500, 2 Ton Pickup 1972 White, Chevy Blazer 2WD 67 Dog house 5.3 4L65 2016 Power Tour LH 1955 Red-Cream, Chevrolet Nomad, restoration on hold 2004 Black, Corvette Z06 LS6 convertible (Rock solid Fun) 2011/2018 Power Tour |
|
|
|
|
|
11-27-2019, 10:55 PM
|
#24 |
|
Registered User
Join Date: Jun 2006
Location: Lutz, Florida
Posts: 838
|
Re: 1967 C50 pickup - finally starting to paint
Update, got the front bumper on and interior finished. USA1 interior cover fit great!
__________________
1967 Red, C10 Short Bed 6.0L T5 5 speed 1967 Orange and Black C50 6.2 Detroit Diesel NV4500, 2 Ton Pickup 1972 White, Chevy Blazer 2WD 67 Dog house 5.3 4L65 2016 Power Tour LH 1955 Red-Cream, Chevrolet Nomad, restoration on hold 2004 Black, Corvette Z06 LS6 convertible (Rock solid Fun) 2011/2018 Power Tour |
|
|
|
|
04-18-2024, 08:31 PM
|
#25 | |
|
Registered User
Join Date: May 2014
Location: Danbury, CT
Posts: 5
|
Re: 1967 C50 pickup - finally starting to paint
Quote:
I was hoping you could send or post a pic with a closer look at the bolt-hole pattern and the hooks themselves if you have good pics. Also, I'm not sure if I missed a picture or not but was there an option code listed in the glove box for the hooks? I appreciate any info and help! Here's a pic of my project.  
|
|
|
|
|
|
| Bookmarks |
|
|
Hybrid Mode
