<<< Longhornmail >>>>> - The 1947 - Present Chevrolet & GMC Truck Message Board Network

diggin69 · 01-15-2003, 09:53 AM

When you did your tach were you able to still use the cirket board for the non tach dash just wondering if I need to get the board for the tach so everything will fit right, or when you knock the back out will everything still work......... thanks for the help!

Diggin.

diggin69 · 01-15-2003, 04:32 PM

ttt

Longhorn Man · 01-15-2003, 09:53 PM

Yup, it was a streach, but it all works. I tested every circuit (since i can't test it in the truck yet) and all is good. I even wired the lights from the tach and acc guages to work witht eh dash lights.

I'll see if I can't get some pics of the back of the panel.

Hooter · 01-15-2003, 10:15 PM

Is that a suntach? or the cheepe tach from Wally World?

Longhorn Man · 01-16-2003, 12:28 AM

Hmmmm, I think it is a sun pro...somethign like that.. I hate not being able to remember the stupid details. It was given to me inlieu of gas money.
Here is how much I had to beat it. It is kinda butch...but hey, it worked. This was the minimum amount too...the tach is actually touching the back.(here is a close up of the tach face...still dunno what brand it is though)

And here you can see where I got power for everything. The green wire hanging there is for the coil.

01-15-2003, 09:53 AM	#1
diggin69 Southern but in Ohio!!!! Join Date: Jan 2002 Location: Eaton,Oh. 45320 Posts: 467	<<< Longhornmail >>>>> When you did your tach were you able to still use the cirket board for the non tach dash just wondering if I need to get the board for the tach so everything will fit right, or when you knock the back out will everything still work......... thanks for the help! Diggin. __________________ 1969 C/10 3/4 ton 4x4 longbed custom, frame made from a 79 1972 custom-10 half/ton longbed 1980 1/2 ton 4x4 all original 350/350/205 with air Eaton,Oh rebelryder@hotmail.com

01-15-2003, 04:32 PM	#2
diggin69 Southern but in Ohio!!!! Join Date: Jan 2002 Location: Eaton,Oh. 45320 Posts: 467	ttt __________________ 1969 C/10 3/4 ton 4x4 longbed custom, frame made from a 79 1972 custom-10 half/ton longbed 1980 1/2 ton 4x4 all original 350/350/205 with air Eaton,Oh rebelryder@hotmail.com

01-15-2003, 10:15 PM	#4
Hooter My other Love Join Date: Aug 2001 Location: Castlegar B.C. Canada Posts: 4,085	Is that a suntach? or the cheepe tach from Wally World? __________________ Castlegar B.C.The great white North (Canada Eh!) Hooter_5@hotmail.com First generation Monte Carlo club pictures of my life

01-15-2003, 09:53 PM	#3
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Yup, it was a streach, but it all works. I tested every circuit (since i can't test it in the truck yet) and all is good. I even wired the lights from the tach and acc guages to work witht eh dash lights. I'll see if I can't get some pics of the back of the panel.

01-16-2003, 12:28 AM	#5
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Hmmmm, I think it is a sun pro...somethign like that.. I hate not being able to remember the stupid details. It was given to me inlieu of gas money. Here is how much I had to beat it. It is kinda butch...but hey, it worked. This was the minimum amount too...the tach is actually touching the back.(here is a close up of the tach face...still dunno what brand it is though) And here you can see where I got power for everything. The green wire hanging there is for the coil.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.