sm465 th350 swap - The 1947 - Present Chevrolet & GMC Truck Message Board Network

theside00 · 08-27-2007, 10:54 PM

been searching for a while trying to find some hard evidence and must be searching for the wrong thing but my question is how much work would it take to switch a th350 4WD tranny to a sm465 4WD tranny? This will bolt up to a 454. I know about the clutch linkage and all that stuff but I am wondering about special bell housing needed or if I have to change output shafts or not. The sm465 had a 208 attached to the back so I shouldnt have to change shafts to fit the 205 on there? Any info on this will be helpful and sorry if this is a repost or subject that has been beaten to death on here (new to the forum)

WORNBRAKES · 08-28-2007, 01:38 AM

I am by no means the expert on swaps like this but if you repost over in the 4x4 section, you might get a quicker response.

72armyswbtruck · 08-28-2007, 04:05 AM

Ditto, I think that the 4x4 guys would be able to help you out, either way here is a bump for you

TonyJohnson · 08-28-2007, 10:38 AM

The toughest part is the clutch pedals/linkage stuff and the engine position/driveshafts issues. The easiest thing would be to find a board member in your area that wants to swap their setup for yours. Then you both would have all the right parts... SM465s and NP205s are pretty easy to find.

08-27-2007, 10:54 PM	#1
theside00 Registered User Join Date: Jun 2007 Location: Seattle WA Posts: 38	sm465 th350 swap been searching for a while trying to find some hard evidence and must be searching for the wrong thing but my question is how much work would it take to switch a th350 4WD tranny to a sm465 4WD tranny? This will bolt up to a 454. I know about the clutch linkage and all that stuff but I am wondering about special bell housing needed or if I have to change output shafts or not. The sm465 had a 208 attached to the back so I shouldnt have to change shafts to fit the 205 on there? Any info on this will be helpful and sorry if this is a repost or subject that has been beaten to death on here (new to the forum)

08-28-2007, 01:38 AM	#2
WORNBRAKES Senior Member Join Date: Jul 2001 Location: Hughesville, MD Posts: 1,350	Re: sm465 th350 swap I am by no means the expert on swaps like this but if you repost over in the 4x4 section, you might get a quicker response. __________________ Mario and Mandy Hughesville, MD 20637 69 C10 305/350 71 K5 Basket case 75 K10 Rescue Parting out 77 MG Midget Parting out 15 6.7L Cummins

08-28-2007, 04:05 AM	#3
72armyswbtruck Registered User Join Date: Feb 2004 Location: Idaho Posts: 4,034	Re: sm465 th350 swap Ditto, I think that the 4x4 guys would be able to help you out, either way here is a bump for you __________________ "Remember, They can Kill You, but they can't eat You, That's against the law!!!!!!!!!"

08-28-2007, 10:38 AM	#4
TonyJohnson Registered User Join Date: Mar 2003 Location: Cheboygan, MI Posts: 998	Re: sm465 th350 swap The toughest part is the clutch pedals/linkage stuff and the engine position/driveshafts issues. The easiest thing would be to find a board member in your area that wants to swap their setup for yours. Then you both would have all the right parts... SM465s and NP205s are pretty easy to find. __________________ Tony Johnson -- '71 Blazer w/L-31 Vortec 350, SM465, NP205, performer intake, edelbrock 1406, HEI, 4" lift, Boyd EFI tank, Vintage A/C My Blazer --



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.