![]() |
|
![]() |
#1 |
Registered User
Join Date: Nov 2009
Location: greenville,sc
Posts: 89
|
need opinions
i bought a 72 swb a little while back, and its been hit on the passenger side. anyway it suffered a little frame damage. should i take the truck and have the frame straightened on a rack or just buy another frame? thanks so much,,, robbie
|
![]() |
![]() |
![]() |
#2 |
someday it will be done!
Join Date: Sep 2004
Location: Lloydminster,AB. Canada
Posts: 1,620
|
Re: need opinions
Depending on how bad it is I'd at least look into having the frame straightened before thinking about replacing.That is unless you were planning a frame off resto in the near future.
![]()
__________________
'72 C-10 Proud owner of a million new and used pieces that used to be and will once again be(god willing) a testament to the term "they don't build em like that anymore. ![]() ![]() ![]() '80 LWB 2wd beater '67 GMC long fleet (cab donor) '66 long step (parked till it's turn comes around) '65 short step (parts truck that will donate it's bed and possibly frame to the '66) '06 Grand Prix wife's car (she hardly lets me touch it) my pics |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Aug 2008
Location: Mansfield, TX
Posts: 309
|
Re: need opinions
Frames aren't too bad on these things, there's one in the classifieds for like 250. It is a ton of work tho. If you're planning on building one up from the ground i'd say replace it.
|
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Jul 2003
Location: Cypress, Tx
Posts: 4,005
|
Re: need opinions
I say get it straightened. It really isn't that expensive, and if done right you can't even tell it has been done. If you get another frame you will have to move everything over, and also probably at least get it checked by a shop for straightness. These trucks were used for alot of hard work, and just because the truck hasn't been in an accident doesn't mean the frame hasn't been tweaked by pulling/hauling heavy loads. I had a truck that the rear part of the frame at the back of the bed was 1" lower than the opposite side. Straight as an arrow, no accidents, just lower on the over all back corner starting from the rear differential back. looks like somebody maybe hauled something really heavy on that side and maybe it bounced around, or maybe a heavy piece of equipment was mounted on that side. Just a thought.
SHawn
__________________
1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Nov 2009
Location: greenville,sc
Posts: 89
|
Re: need opinions
well im still weighing my options out. im not building a show truck but rather a really nice driver. a buddy of mine built a 72 4x4 and put it on a blazer frame and he said he has to carry both titles. frame and body.
|
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Nov 2009
Location: greenville,sc
Posts: 89
|
Re: need opinions
oh yea, the local frame shop wants $400 to pull the frame, and i found one to buy for $125
|
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Aug 2007
Location: pittsburgh pa
Posts: 1,970
|
Re: need opinions
Buy a new one... take your time and build it the way you want then swap the metal.... Never heard of having to carry two titles... Different states have different laws but PA is pretty strict and you do not have to!
__________________
68 C10 Shorty TPI,Bagged, and all the good stuff. Classic trucks feature June 06, On the cover of Jegs Christmas Catalog 08 67 C10 Shorty Shop truck project Bagged and Z'd under destruction and getting nowhere fast. 64 C10 Shop Truck/Daily driver, Bagged, Dropmember, SOLD!!!! Gone but not forgotten.. 54 GMC under the knife getting a S10 chassis swap and bagged. See my build thread... 07 GMC Sierra 5/7 drop, 22's and 24's Air ride on my mind.. http://67-72chevytrucks.com/vboard/s...d.php?t=339340 See pics of my trucks in my profile |
![]() |
![]() |
![]() |
#8 |
Registered User
Join Date: Jan 2006
Location: Take Off
Posts: 1,908
|
Re: need opinions
I would never tear the truck down so that you cannot drive it. Keep it driveable or you may never finish it. I would not go though all that work to swap frames just to save $275. The next frame you buy could be bent, too, or have some other issues that totally negate any money you saved. Also, your time is worth more than $275 IMO.
|
![]() |
![]() |
![]() |
#9 | |
Registered User
Join Date: Nov 2009
Location: greenville,sc
Posts: 89
|
Re: need opinions
Quote:
|
|
![]() |
![]() |
![]() |
#10 |
Special Order
![]() ![]() Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,859
|
Re: need opinions
Changing frames is way more than $275 worth of labor,even figuring your free time enjoying the process.There`s a whole lot of $275 dollars to invest.
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ |
![]() |
![]() |
![]() |
Bookmarks |
|
|