DFW: A/c Cab 300 or trade - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Primered_69 · 01-26-2005, 09:05 PM

Needs some rocker work. Missing front windshield, gauges, and exterior cargo light. Has good texas title

Ac controller not pictured but comes with truck. 300 obo.

Note: Dash is cut for radio.

Can possibly deliever for gas money around DFW area.

Trade Material: 67 lwb bedside, Powerbrake booster, floor shift column, sbc headers, sbc valve covers, tools, drop components for 71-72 truck, stock rear coils (need four) FOR SPECIAL PROJECT, FRONT INNER FENDERS, 69-70 grill outer, peep mirrors, black seat belts, etc.

Primered_69 · 01-26-2005, 09:07 PM

Primered_69 · 01-26-2005, 09:08 PM

69ChevySWB · 01-26-2005, 11:32 PM

I have one set of rear springs. They are still on the trailing arms.

Putter · 01-27-2005, 10:16 AM

Specific areas of interest....need to check and see if there is rust in these areas:

1) Above the windshield (interior side)
2) Kick panels
3) In, on, or around the cowl (outside)

Plus, I have a set of long tube headers, a set of RAM horn exhaust manifolds (straight dump), one set of springs, and two sets of valve covers (1 set-chrome Edelbrock & 1 set-stock/steel/paintable ones) to get the trading underway.

Primered_69 · 01-28-2005, 09:28 PM

Putter: Let me pass on these questions to my cousin because the cab is up at his house.

Putter · 01-31-2005, 10:47 AM

Still interested in that cab Primered 69. Ready to travel!!! (Thanks)

Primered_69 · 01-31-2005, 05:39 PM

I will get my cousin to get pictures of the areas tomorrow. It has been raining and where it is is real muddy when raining.

Putter · 02-01-2005, 09:50 AM

Sounds good. If he can't get pix, I just need to know if those areas are good or not. Rockers and corners are expected to be "in-need-of-assistance" with any cab, but I don't want to tackle the windshield or cowl areas. Thanks for your help.

Putter · 02-02-2005, 09:52 AM

:repost: If I post a little something here...it'll move up and be easier for me to find later!!!

01-26-2005, 09:05 PM	#1
Primered_69 Registered User Join Date: Sep 2002 Location: Fort Worth Posts: 1,409	DFW: A/c Cab 300 or trade Needs some rocker work. Missing front windshield, gauges, and exterior cargo light. Has good texas title Ac controller not pictured but comes with truck. 300 obo. Note: Dash is cut for radio. Can possibly deliever for gas money around DFW area. Trade Material: 67 lwb bedside, Powerbrake booster, floor shift column, sbc headers, sbc valve covers, tools, drop components for 71-72 truck, stock rear coils (need four) FOR SPECIAL PROJECT, FRONT INNER FENDERS, 69-70 grill outer, peep mirrors, black seat belts, etc. __________________ 1969 Chevy LWB - with shaved handles; 3 1/2 front/ 5 1/2 rear drop; (waiting to be put back together)

01-26-2005, 09:07 PM	#2
Primered_69 Registered User Join Date: Sep 2002 Location: Fort Worth Posts: 1,409	pictures __________________ 1969 Chevy LWB - with shaved handles; 3 1/2 front/ 5 1/2 rear drop; (waiting to be put back together)

01-26-2005, 09:08 PM	#3
Primered_69 Registered User Join Date: Sep 2002 Location: Fort Worth Posts: 1,409	more __________________ 1969 Chevy LWB - with shaved handles; 3 1/2 front/ 5 1/2 rear drop; (waiting to be put back together)

01-26-2005, 11:32 PM	#4
69ChevySWB Registered User Join Date: Apr 2002 Location: Little Elm, Texas, USA Posts: 237	I have one set of rear springs. They are still on the trailing arms. __________________ Brian Thompson 99 2500 Silverado 6.0 05 Suburban (Wife's) 67 Mustang (Wife's)

01-27-2005, 10:16 AM	#5
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	Specific areas of interest....need to check and see if there is rust in these areas: 1) Above the windshield (interior side) 2) Kick panels 3) In, on, or around the cowl (outside) Plus, I have a set of long tube headers, a set of RAM horn exhaust manifolds (straight dump), one set of springs, and two sets of valve covers (1 set-chrome Edelbrock & 1 set-stock/steel/paintable ones) to get the trading underway. __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket**

01-28-2005, 09:28 PM	#6
Primered_69 Registered User Join Date: Sep 2002 Location: Fort Worth Posts: 1,409	Putter: Let me pass on these questions to my cousin because the cab is up at his house. __________________ 1969 Chevy LWB - with shaved handles; 3 1/2 front/ 5 1/2 rear drop; (waiting to be put back together)

01-31-2005, 10:47 AM	#7
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	Still interested in that cab Primered 69. Ready to travel!!! (Thanks) __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket**

01-31-2005, 05:39 PM	#8
Primered_69 Registered User Join Date: Sep 2002 Location: Fort Worth Posts: 1,409	I will get my cousin to get pictures of the areas tomorrow. It has been raining and where it is is real muddy when raining. __________________ 1969 Chevy LWB - with shaved handles; 3 1/2 front/ 5 1/2 rear drop; (waiting to be put back together)

02-01-2005, 09:50 AM	#9
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	Sounds good. If he can't get pix, I just need to know if those areas are good or not. Rockers and corners are expected to be "in-need-of-assistance" with any cab, but I don't want to tackle the windshield or cowl areas. Thanks for your help. __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket**

02-02-2005, 09:52 AM	#10
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	:repost: If I post a little something here...it'll move up and be easier for me to find later!!! __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket**



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.