![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Account Suspended
Join Date: Oct 2001
Location: phoenix, AZ.
Posts: 181
|
![]()
I am in phoenix, and have a bent axle. recieved new axle from randy. I started on the process to replace it and found that the gears were all messed up! - Today i located a rearend -- the guts are all I needed -- I removed the guts- by the way, this one has 32 teeth on the ring ? what ratio? - anyway I will exchange the rings on the carrier, and replace the unit -- One problem....
the pin in the carrier will not push out!! - the PO f@#ked it up big time! It is currently 2:02 am, and I have been trying to fix this since 7:00 last afternoon. I am thinking a torch will do this - If I can't get this done, I will sit and grind dremel wheels until I cry. - If anybody can help me, I will make it worth (really worth!!) their time. I can be reached at 602-299-7205 please Please please respond!! thanks. ------------------ 1967 C-10 Longbed rollpanned front&back Cowl induction hood '91 5.7 liter/vortec heads, 700r4 trans. holley headers, holley fuelpump, holley mufflers. converted to edelbrock performer/carter 625 hei/advanced recurve MSD 6A ignition box. Accel supercoil Accel custom 8.8 wires 5 bucks a plug even! faster!!!!!!!!!!!!! soon to be lowered "a little" looking for a good tonneau cover. |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Oct 2000
Location: From Chicago, Live in Phoenix, AZ
Posts: 6,802
|
![]()
What type of help do you need?
__________________
Just sitting here contemplating contemplation. |
![]() |
![]() |
![]() |
#3 |
Account Suspended
Join Date: Oct 2001
Location: phoenix, AZ.
Posts: 181
|
![]()
I think I'll need to cut that pin out with a torch. pretty much that's all I need help with (famous last words)
|
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Oct 2000
Location: From Chicago, Live in Phoenix, AZ
Posts: 6,802
|
![]()
Well do you have a torch? What help do you need?
__________________
Just sitting here contemplating contemplation. |
![]() |
![]() |
![]() |
#5 |
Senior Member
![]() Join Date: Dec 1999
Location: Darrington, Washington
Posts: 3,963
|
![]()
did you take out the bolt?
|
![]() |
![]() |
![]() |
#6 |
Account Suspended
Join Date: Oct 2001
Location: phoenix, AZ.
Posts: 181
|
![]()
I dont have a torch - I took out the bolt the pin is so warped that it has mushroomed around the spider gears -- they have their own tracks on the pin to ride on basically.
ttt |
![]() |
![]() |
![]() |
#7 |
Account Suspended
Join Date: May 2000
Location: IL
Posts: 0
|
![]()
32 ?
should be 41 or 43 if is 64-72 axle.. lok on the very edge of the ring gear while tiurning it you will see stamped in numbers, wil say sometihng like 43:13 on it, divide smaller into larger ot get you ratio. i have torch, too bad im not out there, i really wish i was!!! sniff sniff** am gonna call you in a few, R [This message has been edited by Fast68Chevy (edited May 04, 2002).] |
![]() |
![]() |
![]() |
Bookmarks |
|
|