|
|
|
03-22-2009, 12:40 AM
|
#1 |
|
Registered User
Join Date: Feb 2008
Location: Grande Prairie Alberta
Posts: 261
|
fix locks
well me driver side lock decided to brake on me. the inside works but the outside doesnt. im guessing ice is the cause here cause i had to hammer on the door button to open it, and i had a car wash a few hours earlier. anyone ever have this happen to them, or any advise what to look for.
__________________
eh  1970 Chevy C20 daily driver  1975 GMC Jimmy 4x4 project  1966 GMC C10 Dad's project 
|
|
|
|
03-22-2009, 02:37 AM
|
#2 |
|
Gone to greener pastures
 Join Date: May 2007
Location: Gateway to the Delta
Posts: 7,354
|
Re: fix locks
Lockdoc (Leon) would be your "be to" man for that question.
__________________
'69 Chevy 1/2 T LWB Stepper: Daily Beater '72 GMC 3/4 T Fleet: Another Daily Beater '72 Plymouth Gran Coupe: ? "Ah women. They make the highs higher and the lows more frequent." Friedrich Nietzsche "Never kick a fresh turd on a hot day." Harry S. Truman GUN CONTROL: Never having to say, "I missed you." Always fire two warning shots into your attacker's chest area before putting a bullet between his eyes. Paraphrased from Louis Awerbuck |
|
|
|
|
03-22-2009, 09:48 AM
|
#3 |
|
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,945
|
Re: fix locks
Outside lock is broke or door handle button is broke? If you hammered on the button to open the door then you broke the tabs off more than likely. You will need to take the inner door skin off and there are 2 7/16 bolts that hold the handle on to the door. Take those out the handle will fall off so keep a hand on it. The button is either in the bottom of the door or is hanging to the handle once you get it out you'll see how it goes.
In the past I have cut a small cut on the sides put the button back inside the handle and then bend it over to reinstall and hold it in place. That's the cheap way to fix it. The right way is buy a new one. Oh and don't have it washed right before a big freeze!  
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. |
|
|
|
|
03-22-2009, 10:38 AM
|
#4 |
|
The Older Generation
  
Join Date: Aug 2006
Location: Montezuma, Iowa
Posts: 25,648
|
Re: fix locks
-
I think Andy is right on the money here. I think the terminology is messing us up...  .. The lock is where the key goes in and the handle is where the push button is. Not meaning to sound like a smart a$$ but if we were standing face to face looking at the part it wouldn't be a problem seeing what it was. Being miles apart and conversing over the internet the description needs to be a little more accurate. Just a friendly heads up....LockDoc
__________________
Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 - |
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
