Pulling a Serpentine pulley off an alternator?? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**mr48chev** · 07-14-2009, 09:48 PM

Ok my turn to ask a queston.

I'm trying to pull the serpentine pulley off an alternator I have and I can't get it to move. It has what appears to be a split ring wedge type of affair inside the pulley to tighten it on the shaft.
The alternator is a 120 amp delco.

Any suggestions or suggestions would be greatly appreciated at the moment.

Sammy · 07-14-2009, 09:53 PM

I believe autozone has a lend a tool puller that could help you. They are free with a returnable deposit. Give em a call and ask.

**mr48chev** · 07-14-2009, 09:58 PM

Ok, I can still make the two miles to the store before they close. There must be some trick to it as I haven't had any luck with normal methods.

Dingfodgy · 07-14-2009, 10:35 PM

There shouldn't be any internal retainer dooey-bobs. I've pulled the pulley off a couple serp. alts. and all I used was a "right-sized" gear puller and a touch of PB Blaster (after removing the 15/16 nut first). The PS Pump pulley is a whole 'nother animal altogether.....but we won't get into that!

STOCKISH · 07-15-2009, 07:52 AM

The "split ring" is nothing more than a lock washer. The pulley is supposed to slide right off once nut and washer are removed. Good luck to ya.

07-14-2009, 09:48 PM	#1
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,639	Pulling a Serpentine pulley off an alternator?? Ok my turn to ask a queston. I'm trying to pull the serpentine pulley off an alternator I have and I can't get it to move. It has what appears to be a split ring wedge type of affair inside the pulley to tighten it on the shaft. The alternator is a 120 amp delco. Any suggestions or suggestions would be greatly appreciated at the moment.

07-14-2009, 09:53 PM	#2
Sammy Registered User Join Date: Apr 2000 Location: Bonne Terre, Mo Posts: 3,005	Re: Pulling a Serpentine pulley of an alternator?? I believe autozone has a lend a tool puller that could help you. They are free with a returnable deposit. Give em a call and ask. __________________ '69 Chevy Long Fleet & '71 GMC Short Step & Project "ODD BALL" "You can wash a pig, soak it in most expensive perfume. In the end it is still just a pig." ODD BALL build thread http://67-72chevytrucks.com/vboard/s...d.php?t=478629"

07-14-2009, 09:58 PM	#3
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,639	Re: Pulling a Serpentine pulley of an alternator?? Ok, I can still make the two miles to the store before they close. There must be some trick to it as I haven't had any luck with normal methods.

07-14-2009, 10:35 PM	#4
Dingfodgy Lemme show you something!! Join Date: Apr 2007 Location: St.Helens, OR. Posts: 876	Re: Pulling a Serpentine pulley of an alternator?? There shouldn't be any internal retainer dooey-bobs. I've pulled the pulley off a couple serp. alts. and all I used was a "right-sized" gear puller and a touch of PB Blaster (after removing the 15/16 nut first). The PS Pump pulley is a whole 'nother animal altogether.....but we won't get into that! __________________ '67 CST-10 LWB ("Crusty") SOLD '67 GMC SWB ("Murdock") 2000 K1500 Suburban ("Betty") '95 BMW 325i ("Joy")

07-15-2009, 07:52 AM	#5
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: Pulling a Serpentine pulley off an alternator?? The "split ring" is nothing more than a lock washer. The pulley is supposed to slide right off once nut and washer are removed. Good luck to ya. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.