65Custom Build Thread - The 1947 - Present Chevrolet & GMC Truck Message Board Network

65Custom · 10-11-2009, 01:03 AM

Hey guys I have been a member of this site for awhile but not a participating member. So I figure it is about time I started my build thread since I see so many of the guys around me have build threads I figure I should add mine maybe I can add some what not to do's or maybe a to do, I do sometimes hit on something that is good.

I have a 1965 Custom C10 I bought it just outside of Nashvegas in 2007. I have a ton of pictures. I try to take pics of everything that I do some for memory so I can put it back together and others to show what I have done.

The project plan is to do a Resto-Mod as some call it I'm trying to just do some good updates and some custom touches too just want to be a little different in a subtle way Keep the look of the truck mostly original looking but with some things that may make you to ask question.

1. Plans are to put a LS1 and 460le for power
2. I have a locker for the rear & convert it to 5 lug front and rear with a 3:42 gear
3. power 4 wheel disc
4. close ratio power steering
5. front and rear sway bars
6. AC, power windows & locks, tilt wheel, once piece windows (not sure about this one I go back and fourth on it)
7. relocate the gas tank to under the bed
8. Some other custom touches that you will see as I go along ( I hope )

These pics are just after I got her home and started tearing her down. I have the frame ready to go back together and I am currently working on the cab metal work So there has been a lot of work on her (no name yet) much more than anticipated, but this one is being saved although it probably should have scrapped, it looked ok while it had all the paint, bondo & floor repair cover up goo on it
I have plenty more pics to post since I have made a lot of progress in three years just to get y'all up to speed on where I am currently at unless y'all want to just flash forward

Sorry for long post but this is the initial post

BR3W CITY · 10-11-2009, 02:24 AM

sounds like you have big plans, but your def getting started. Those floors looks scary tho.

Alan's Classic · 10-11-2009, 08:59 AM

It's good to see you on here and I'm lookin' forward to more pics and progress. Looks like you have a good plan.

I've talked to you several times on the phone, I need to make it a point to stop by and check you out.

65Custom · 10-11-2009, 10:38 AM

Quote:

Originally Posted by Alan's Classic

It's good to see you on here and I'm lookin' forward to more pics and progress. Looks like you have a good plan.

I've talked to you several times on the phone, I need to make it a point to stop by and check you out.

Hey Alan I know we just live down the road from each other and I have been wanting to come up see your 65 and the shop you have

We started out builds close to the same time but dang you are much faster than I am about getting things going any way maybe we can meet sometime soon i just have to get off my butt and get up there

65Custom · 10-11-2009, 10:47 AM

So I'm getting used to this forum so bear with me if I make any slip ups I'm sure you guys will guide me along

Oh yeah I'm bagging my baby Had a friend talk me into it

Somebody may need to tell me how to quote the pics

65Custom · 10-11-2009, 10:54 AM

A few more shots

Creating templates for boxing in the frame, straightened the rear brace, the rear trialling arms we splitting apart and I found a website where they sell used nascar parts and bought some trailing arms they fit prefect with a little bit of work. Also filled a lot of the holes in the frame for a much smoother look.

1964C10 · 10-12-2009, 01:10 PM

Wow, awesome work! that is definitely a lot of sheetmetal work. Welcome and keep us posted we are such picture monsters lol

66Z71 · 10-12-2009, 06:00 PM

That is awsome. After seein the rusted floor in the begining, I was ready to write this one off as another project that will never see the light of day. But replacing the whole floor??? that is frikin awsome. I love it.

65Custom · 10-12-2009, 09:26 PM

Quote:

Originally Posted by Captainfab

WOW! you've done some serious metal work on that cab. I'm impressed with the results. Keep up the excellent work. I'm looking forward to updates.

Thanks I have about half of the cab work completed there will be more to come since the roof panel gets replaced too looked good till it was cleaned up at the blasters

Quote:

Originally Posted by greg65

What did you decide to do with the bed you bought out of Texas?

I decided to keep it I think it is very fixable with parts from the other one

Quote:

Originally Posted by MacAttack

Really dig the close-ups on the fab work - showing the rust challenges.

Please keep us posted, step by step - lots of excellent information!

Mac.

Will do, I had to get new cab corners the ones I have from LMC seem to not fit very well and after talking to Alan about his I decided to try another set I'll let you all know how they work out

Quote:

Originally Posted by 1964C10

Wow, awesome work! that is definitely a lot of sheetmetal work. Welcome and keep us posted we are such picture monsters lol

Yeah man will do

Quote:

Originally Posted by 66Z71

That is awsome. After seein the rusted floor in the begining, I was ready to write this one off as another project that will never see the light of day. But replacing the whole floor??? that is frikin awsome. I love it.

Yeah man I wish they had actually made a replacement floor for ours like the do the 67-72 but it has been a great learning experience and not as hard as one might think

65Custom · 10-18-2009, 11:14 PM

I decided to go ahead and get new skins for my doors since the skin cost is considerably less than one new door shell and I got nothing but time on my hands to fixmy

doors. Since I tried to find some good doors but everything I come accross is worse than what I have.

The parts came in today and DS panel is bent in the top corner by the mirror mounting holes I will probably be call them them tomorrow about that one.

I also bought new cab corners since I was having issues with getting them to fit right without a lot of cursing and other things flying across the garage and after

talking to Alan about his and what he ended up doing I decided to get new ones.

I searched all the suppliers and settled on one that i thought might be the correct ones.

I got the new cab corners too and man what a difference. I don't want to hammer on any of the suppliers out there but I cant believe they get away with what they are

selling.

Some of you out there may have already experienced this but attached are pictures of the first ones I bought sitting next to the new ones and you can really see the

difference.

If anyone is about to do this you may want to re think the parts you have. The new ones have the correct shape to the B Post also at the bottom where they meet the rocker

it also has a more correct pinch weld on the back wall, it is amazing how much better these are in just the shape etc.

I fitted the the passenger side today and it look pretty good to me, these fit like a charm and look correct and were much easier to get fitted.

As soon as I can post pics again I will put them up

jgh64pkup · 10-18-2009, 11:41 PM

awesome build

65Custom · 10-20-2009, 10:31 PM

Alright here are the pics of the cab corners if anyone wants to know where they came from just send me a pm.

**DPowers** · 10-21-2009, 09:36 AM

Way cool

ruffrida2005 · 10-21-2009, 09:08 PM

man looks like you've been doing a lot of work.

65Custom · 10-21-2009, 09:46 PM

Quote:

Originally Posted by DPowers

Way cool

Thanks

Quote:

Originally Posted by ruffrida2005

man looks like you've been doing a lot of work.

Yep and still have more to do I wonder if it will ever end

65Custom · 10-21-2009, 09:58 PM

Thought that I would post a pic of the passenger side cab corner.

Maybe these will give you an idea of how they fit.

shortbed70 · 10-21-2009, 10:09 PM

Nice metalwork man. What do you do for a living?

65Custom · 10-22-2009, 11:58 AM

Quote:

Originally Posted by shortbed70

Nice metalwork man. What do you do for a living?

Thanks for the complement I need all those I can get. Some days is harder than others to keep going but I am making it a priority to get this thing done.

By day I work in IT and by night I am a mechanic, carpenter, cook, Gardner, metal fab worker, designer, engineer, father what ever it takes to get it done.

Don't get me wrong I have had some help on this thing in a couple of areas just to make sure that I'm not screwing it up, but I have done 99% of the work myself.

Roadhammer · 10-22-2009, 02:07 PM

I think i just watched the progression of my worst nightmare in picture form.

Good grief thats alot of technical work. Keepin everthing in line and lookin good...WOW!

Jory

DaddyMack · 01-05-2010, 12:16 PM

Quote:

Originally Posted by 65Custom

Thanks for the complement I need all those I can get. Some days is harder than others to keep going but I am making it a priority to get this thing done.

By day I work in IT and by night I am a mechanic, carpenter, cook, Gardner, metal fab worker, designer, engineer, father what ever it takes to get it done.

Don't get me wrong I have had some help on this thing in a couple of areas just to make sure that I'm not screwing it up, but I have done 99% of the work myself.

Wow.. better than me... I didn't even attempt the metal work on mine. But you are motivating me for my next project to give it a go.. nice work!!

scotts62 · 01-05-2010, 04:04 PM

Wow i missed this thread! Looks good and awesome work!

ruffrida2005 · 01-05-2010, 08:45 PM

Scott your always behind

scotts62 · 01-05-2010, 08:59 PM

Quote:

Originally Posted by ruffrida2005

Scott your always behind

Yeah i know....

Old School Kid · 01-05-2010, 09:02 PM

Subscribed! Awesome work! I look forward to seeing it at Po Boys one day

Ever need a hand or an eye out for something, just let me know..

Howdy from Marietta!

65Custom · 01-05-2010, 10:05 PM

Quote:

Originally Posted by Old School Kid

Subscribed! Awesome work! I look forward to seeing it at Po Boys one day

Ever need a hand or an eye out for something, just let me know..

Howdy from Marietta!

Hey Old School nice to meet ya! Thanks I'm trying to do it right. Another hand! Thanks. I'm sure that I will need some help coming up sometime in the near future. I'll give ya ping when that time comes.

I hope to make to some shows around if I can ever get it finished.

10-11-2009, 01:03 AM	#1
65Custom Registered User Join Date: Apr 2009 Location: Dawson, Ga Posts: 507	65Custom Build Thread Hey guys I have been a member of this site for awhile but not a participating member. So I figure it is about time I started my build thread since I see so many of the guys around me have build threads I figure I should add mine maybe I can add some what not to do's or maybe a to do, I do sometimes hit on something that is good. I have a 1965 Custom C10 I bought it just outside of Nashvegas in 2007. I have a ton of pictures. I try to take pics of everything that I do some for memory so I can put it back together and others to show what I have done. The project plan is to do a Resto-Mod as some call it I'm trying to just do some good updates and some custom touches too just want to be a little different in a subtle way Keep the look of the truck mostly original looking but with some things that may make you to ask question. 1. Plans are to put a LS1 and 460le for power 2. I have a locker for the rear & convert it to 5 lug front and rear with a 3:42 gear 3. power 4 wheel disc 4. close ratio power steering 5. front and rear sway bars 6. AC, power windows & locks, tilt wheel, once piece windows (not sure about this one I go back and fourth on it) 7. relocate the gas tank to under the bed 8. Some other custom touches that you will see as I go along ( I hope ) These pics are just after I got her home and started tearing her down. I have the frame ready to go back together and I am currently working on the cab metal work So there has been a lot of work on her (no name yet) much more than anticipated, but this one is being saved although it probably should have scrapped, it looked ok while it had all the paint, bondo & floor repair cover up goo on it I have plenty more pics to post since I have made a lot of progress in three years just to get y'all up to speed on where I am currently at unless y'all want to just flash forward Sorry for long post but this is the initial post Attached Images Last edited by 65Custom; 10-18-2009 at 11:23 PM.

10-11-2009, 02:24 AM	#2
BR3W CITY meowMEOWmeowMEOW Join Date: Sep 2009 Location: MKE WI Posts: 7,128	Re: 65Custom Build Thread sounds like you have big plans, but your def getting started. Those floors looks scary tho. __________________ *'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING* MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD

10-11-2009, 08:59 AM	#3
Alan's Classic 1 thing at a time is progress. Join Date: Jun 2007 Location: Ball Ground GA Posts: 5,511	Re: 65Custom Build Thread It's good to see you on here and I'm lookin' forward to more pics and progress. Looks like you have a good plan. I've talked to you several times on the phone, I need to make it a point to stop by and check you out. __________________ Alan Philippians 2:14-16 Alan's Classic Facebook page. North Georgia Group Project 1965 Vitamin C-10 1995 GMC Sierra K1500 The "Wrecker"

10-11-2009, 10:47 AM	#5
65Custom Registered User Join Date: Apr 2009 Location: Dawson, Ga Posts: 507	Re: 65Custom Build Thread So I'm getting used to this forum so bear with me if I make any slip ups I'm sure you guys will guide me along Oh yeah I'm bagging my baby Had a friend talk me into it Somebody may need to tell me how to quote the pics Attached Images Last edited by 65Custom; 10-18-2009 at 11:40 PM.

10-11-2009, 10:54 AM	#6
65Custom Registered User Join Date: Apr 2009 Location: Dawson, Ga Posts: 507	Re: 65Custom Build Thread A few more shots Creating templates for boxing in the frame, straightened the rear brace, the rear trialling arms we splitting apart and I found a website where they sell used nascar parts and bought some trailing arms they fit prefect with a little bit of work. Also filled a lot of the holes in the frame for a much smoother look. Attached Images Last edited by 65Custom; 10-18-2009 at 11:45 PM.

10-12-2009, 01:10 PM	#7
1964C10 Registered User Join Date: Mar 2008 Location: San Marcos, CA Posts: 578	Re: 65Custom Build Thread Wow, awesome work! that is definitely a lot of sheetmetal work. Welcome and keep us posted we are such picture monsters lol __________________ 1964 Fleetside LWB 1995 Yellow Mustang convertible 1996 Camaro Z28 My build thread Looking for help on completing the Disc Brake Upgrade Reference Thread If you didn't build it, you don't really own it

10-12-2009, 06:00 PM	#8
66Z71 Registered User Join Date: Feb 2009 Location: Milwaukie, Oregon Posts: 204	Re: 65Custom Build Thread That is awsome. After seein the rusted floor in the begining, I was ready to write this one off as another project that will never see the light of day. But replacing the whole floor??? that is frikin awsome. I love it.

10-18-2009, 11:14 PM	#10
65Custom Registered User Join Date: Apr 2009 Location: Dawson, Ga Posts: 507	Re: 65Custom Build Thread I decided to go ahead and get new skins for my doors since the skin cost is considerably less than one new door shell and I got nothing but time on my hands to fixmy doors. Since I tried to find some good doors but everything I come accross is worse than what I have. The parts came in today and DS panel is bent in the top corner by the mirror mounting holes I will probably be call them them tomorrow about that one. I also bought new cab corners since I was having issues with getting them to fit right without a lot of cursing and other things flying across the garage and after talking to Alan about his and what he ended up doing I decided to get new ones. I searched all the suppliers and settled on one that i thought might be the correct ones. I got the new cab corners too and man what a difference. I don't want to hammer on any of the suppliers out there but I cant believe they get away with what they are selling. Some of you out there may have already experienced this but attached are pictures of the first ones I bought sitting next to the new ones and you can really see the difference. If anyone is about to do this you may want to re think the parts you have. The new ones have the correct shape to the B Post also at the bottom where they meet the rocker it also has a more correct pinch weld on the back wall, it is amazing how much better these are in just the shape etc. I fitted the the passenger side today and it look pretty good to me, these fit like a charm and look correct and were much easier to get fitted. As soon as I can post pics again I will put them up __________________ My Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=366677 I must be

10-18-2009, 11:41 PM	#11
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: 65Custom Build Thread awesome build __________________ Gage 1967 C10 Shortbed Stepside

10-20-2009, 10:31 PM	#12
65Custom Registered User Join Date: Apr 2009 Location: Dawson, Ga Posts: 507	Re: 65Custom Build Thread Alright here are the pics of the cab corners if anyone wants to know where they came from just send me a pm. Attached Images __________________ My Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=366677 I must be

10-21-2009, 09:36 AM	#13
DPowers One foot in front of the other Join Date: Aug 2008 Location: Parrottsville, TN Posts: 5,442	Re: 65Custom Build Thread Way cool

10-21-2009, 09:08 PM	#14
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: 65Custom Build Thread man looks like you've been doing a lot of work. __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759

10-21-2009, 09:58 PM	#16
65Custom Registered User Join Date: Apr 2009 Location: Dawson, Ga Posts: 507	Re: 65Custom Build Thread Thought that I would post a pic of the passenger side cab corner. Maybe these will give you an idea of how they fit. Attached Images __________________ My Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=366677 I must be

10-21-2009, 10:09 PM	#17
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: 65Custom Build Thread Nice metalwork man. What do you do for a living? __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

10-22-2009, 02:07 PM	#19
Roadhammer Registered User Join Date: Aug 2009 Location: Coaldale Alberta Posts: 174	Re: 65Custom Build Thread I think i just watched the progression of my worst nightmare in picture form. Good grief thats alot of technical work. Keepin everthing in line and lookin good...WOW! Jory



Register or Log In To remove these advertisements.

01-05-2010, 04:04 PM	#21
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: 65Custom Build Thread Wow i missed this thread! Looks good and awesome work! __________________ Scott 93 crew cab build Project 62

01-05-2010, 08:45 PM	#22
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: 65Custom Build Thread Scott your always behind __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759

01-05-2010, 09:02 PM	#24
Old School Kid Rottenwood Garage Member..Yes! Join Date: Oct 2008 Location: Marietta, Georgia Posts: 174	Re: 65Custom Build Thread Subscribed! Awesome work! I look forward to seeing it at Po Boys one day Ever need a hand or an eye out for something, just let me know.. Howdy from Marietta! __________________ When interests become diversified, not all can be Barrett Jackson. Budgets and Accountants get in the way. My 65 (SOLD) http://67-72chevytrucks.com/vboard/s...d.php?t=317013 My 51 (SOLD) http://67-72chevytrucks.com/vboard/s...80#post3551880 Racetruck III (SOLD) http://67-72chevytrucks.com/vboard/s...72#post4254972 Rottenwood Garage and Speed Shop.....where everything must be racy! Gone to dark side for a while...1966 F100 in the stable

Register or Log In To remove these advertisements.