Can't get guage lights to work - The 1947 - Present Chevrolet & GMC Truck Message Board Network

MyakkaJeff · 09-20-2007, 05:51 PM

Hey Guys, Hope you can help. I've replaced the fuse and checked the bulbs but no lights when headlight switch is on. I noticed a empty terminal marked cluster feed. Is this the problem? Also, I have a black wire coming from the ignition switch with a female spade connection on it that isn't connected to anything. Where does this wire go? Maybe to that empty terminal? Thanks.

MyakkaJeff · 09-20-2007, 07:47 PM

Nobody?

Longhorn Man · 09-20-2007, 08:32 PM

is the rheostat turned up?
do the tail lights work? (same circuit)
have you checked the bulbs?

MyakkaJeff · 09-20-2007, 09:08 PM

Yes,Yes, and Yes. Thanks Longhorn Man. Would you know where the black wire from ign switch goes? Or what plugs into cluster feed port on fuse panel? Thanks, Jeff.

MyakkaJeff · 09-20-2007, 09:10 PM

P.S. This is a Chevy 68 with a 283 and 3 on the tree.

Longhorn Man · 09-20-2007, 09:27 PM

I don't know of a pigtail hanging off the ignition switch. I just chopped one out of a 68 GMC for GMCJunkie's son last mo nth, and all wires went to the harness. However, i *think* that would be a ground of some sorts... regardless, it would have absolutly no effect on the laghts.
The terminal on the fuse box is for add on stuff that you would want controlled with the dash lights, or for 69 and up, the light in the tilt column.

jhow66 · 09-20-2007, 09:41 PM

Grey wire from light switch to gauge panel-check to see if it has power with light switch on. If not and parking lights work, test with another switch.

airdale94 · 09-20-2007, 10:08 PM

You might check the printed cicuit on back of the gauge cluster for breaks. My experience it's usually a gauge circuit that gets blown. Also where your plug goes in sometimes the copper can peel back from the laminate and not make contact with one of the terminals.

09-20-2007, 05:51 PM	#1
MyakkaJeff Junior Member Join Date: Dec 2006 Location: Florida, Myakka River Posts: 143	Can't get guage lights to work Hey Guys, Hope you can help. I've replaced the fuse and checked the bulbs but no lights when headlight switch is on. I noticed a empty terminal marked cluster feed. Is this the problem? Also, I have a black wire coming from the ignition switch with a female spade connection on it that isn't connected to anything. Where does this wire go? Maybe to that empty terminal? Thanks. __________________ '63 C10 lwb flatbed '66 C10 lwb stepside '68 C10 lwb stepside (parts) '68 C10 lwb fleetside (17 yr old son's ongoing project) '03 HUMMER H2 (wife's) '06 3500 flatbed liftgate (My work truck)

09-20-2007, 07:47 PM	#2
MyakkaJeff Junior Member Join Date: Dec 2006 Location: Florida, Myakka River Posts: 143	Re: Can't get guage lights to work Nobody? __________________ '63 C10 lwb flatbed '66 C10 lwb stepside '68 C10 lwb stepside (parts) '68 C10 lwb fleetside (17 yr old son's ongoing project) '03 HUMMER H2 (wife's) '06 3500 flatbed liftgate (My work truck)

09-20-2007, 08:32 PM	#3
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: Can't get guage lights to work is the rheostat turned up? do the tail lights work? (same circuit) have you checked the bulbs?

09-20-2007, 09:08 PM	#4
MyakkaJeff Junior Member Join Date: Dec 2006 Location: Florida, Myakka River Posts: 143	Re: Can't get guage lights to work Yes,Yes, and Yes. Thanks Longhorn Man. Would you know where the black wire from ign switch goes? Or what plugs into cluster feed port on fuse panel? Thanks, Jeff. __________________ '63 C10 lwb flatbed '66 C10 lwb stepside '68 C10 lwb stepside (parts) '68 C10 lwb fleetside (17 yr old son's ongoing project) '03 HUMMER H2 (wife's) '06 3500 flatbed liftgate (My work truck)

09-20-2007, 09:10 PM	#5
MyakkaJeff Junior Member Join Date: Dec 2006 Location: Florida, Myakka River Posts: 143	Re: Can't get guage lights to work P.S. This is a Chevy 68 with a 283 and 3 on the tree. __________________ '63 C10 lwb flatbed '66 C10 lwb stepside '68 C10 lwb stepside (parts) '68 C10 lwb fleetside (17 yr old son's ongoing project) '03 HUMMER H2 (wife's) '06 3500 flatbed liftgate (My work truck)

09-20-2007, 09:27 PM	#6
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: Can't get guage lights to work I don't know of a pigtail hanging off the ignition switch. I just chopped one out of a 68 GMC for GMCJunkie's son last mo nth, and all wires went to the harness. However, i think that would be a ground of some sorts... regardless, it would have absolutly no effect on the laghts. The terminal on the fuse box is for add on stuff that you would want controlled with the dash lights, or for 69 and up, the light in the tilt column.

09-20-2007, 09:41 PM	#7
jhow66 Registered User Join Date: Jun 2002 Location: Knoxville Tenn. Posts: 3,058	Re: Can't get guage lights to work Grey wire from light switch to gauge panel-check to see if it has power with light switch on. If not and parking lights work, test with another switch. __________________ 56 Chevy Bel-Air 2dr. HT (purchased new) 71 Chevy Cheyenne SWB PU (502HO) 65 GMC short bed step--work in progress and my gofer

09-20-2007, 10:08 PM	#8
airdale94 Registered User Join Date: Jan 2007 Location: Topeka,KS Posts: 778	Re: Can't get guage lights to work You might check the printed cicuit on back of the gauge cluster for breaks. My experience it's usually a gauge circuit that gets blown. Also where your plug goes in sometimes the copper can peel back from the laminate and not make contact with one of the terminals.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.