![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
this guy
Join Date: Apr 2004
Location: Southwest VA
Posts: 122
|
A big fat welcome to bleach (me) from bleach (me)...lots of questions.
Hey all,
I'm the new guy. I just bought a 69 C/10 4wd with a fairly good body. The engine and tranny works pretty well, but the transfer case leaves some to be desired. It's OK, but I think it's a little loose as it sometimes falls into 4wd. I do know it has no windshield wiper motor because I drove it over a hundred miles over the mountains from NC to VA where I live in the rain, barely being able to see...so if anyone wants to get rid of a wiper motor..... This thing also had power brakes at one time, so I'm in the market for a master cylinder, booster, and associated neccesities. I'm waiting on my Chiltons bible etc to get mailed to me. I wanted to ask you guys a question..can you recomend any certain references? I need a parts interchange manual cause I know alot of the 73 and up stuff fits on these trucks, but I don't know which. I have heard that the 67-72 parts interchange manual is pretty worthless, in that it only mentions which parts are interchangable from within those years. Any other publications, ideas, thoughts? I'm pretty new to this, just got a good job and could by a truck like this..I've always wanted one of these, never had the time or money. I have had some off road late model stuff (89 blazer, 97 ram) that I had lifted and ran into the ground repeatedly, but I'm really excited to get my 69. It has so much style and charachter. There is so much I want to do to it, it's crazy. Brakes and wipers first, then some rust spots.....I really want to do Tennman's gas tank swap too, get that thing out of the cab. Anyway, I'm really pumped to be a member and to talk to you guys, these boards are great. I look forward to talking to you guys.....I'm in Bristol TN/VA, by the way. ![]() ![]() |
![]() |
![]() |
![]() |
#2 |
User #12137
![]() Join Date: Apr 2004
Location: kingsport,upper east tenn
Posts: 11,598
|
hi and welcome . i am in kingsport give me a holler ! i will pm you
|
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Apr 2003
Location: Edgewood New Mexico
Posts: 2,088
|
welcome from new mexico. first off your truck is a K10 not a c10. the c10 is the 2wd truck. and second this is the place to find almost anything about these trucks
__________________
1990 subaru legcy (daily driver) 1987 Toyota 4runner (weekend toy) 1968 ![]() 1970 ![]() 1976 Dodge Dart 1963 Dodge Dart ![]() |
![]() |
![]() |
![]() |
#4 |
this guy
Join Date: Apr 2004
Location: Southwest VA
Posts: 122
|
Well, that clears some things up. I said C/10 because that's what it says on the side of this thing...so in other words I may have some non-original body panels on there..which would explain why I have no side marker ligts on the bed of this thing...I thought there should have been some there. If someone will tell me how to post pics on this mug I'll try and get a couple on here tonight. Me and the truck are very far away as I'm right now in Indy for work but have a few on the computer.
My Kingsport man, tis good to know someone on the board is close. I actually don't even know how to PM anyone yet either, working tonight on figuring out how to work the board efficiently. Perhaps you can fill me in on that way. I'm on dial up right now and it's pretty slow going....painful. ![]() |
![]() |
![]() |
![]() |
#5 | |
Senior Member
![]() Join Date: Feb 2002
Location: Tucson, AZ USA
Posts: 7,284
|
Quote:
As far as the "C/10" emblems go, I'm not sure I've ever seen a K/10 or K/20 fender emblem -- just the K/5 for Blazers. (Actually I did see a "K/10" once on a Suburban, but it looked custom, modified from K/(5) and (C/)10. GM is big enough that they may have turned out a number of 4x4 trucks w/o the right type badges. The C/10 badges are available aftermarket, but no K badges other than K/5. Dosen't mean it's the last word, though. As far as the side markers: '68s and some early '69s have no electrics in them, just the reflectors. It wasn't til '70 or '71 they put working lights on. I know cuz a cop once tried to issue me a defective equipment ticket on my '68 since my markers were "burned out." I tried to tell him it was a '68 and they weren't lamped, but he said his brother-in -law had a '72 and it looked just like this one, so it must be a '72. Can't argue with the law, I guess. ![]() '67s had no side markers at all [one year only] and it looks like your bed is from a '67. ![]()
__________________
Every 25 years I like to rebuild that 292, whether it needs it or not. Last edited by '68OrangeSunshine; 07-27-2004 at 02:47 AM. |
|
![]() |
![]() |
![]() |
#6 |
Born To Lose Club
![]() Join Date: Feb 2003
Location: Calgary, Alberta/Oxenden, Ontario, Great White North
Posts: 13,306
|
Welcome To The Board From The Great White North(and a fellow '69 4x4 owner!)!!! Lets see some pics of that Truck of yours!
__________________
Brian Smith ![]() 1969 Chevrolet K10 LWB Fleetside - Proud Owner For 20 Yrs - 1 of 208 Built & Sold In Canada! - 283 V8/350TH/NP208, 2" All Spring Lift, 32" Good Year MT/R's. 1972 GMC K2500 Custom LWB Fleetside - Proud Owner For 2 Yrs - 1 of 571 Built & Sold In Canada! - 350 V8/SM465/NP205, 4” Rough Country Lift, 33” Interco TSL Thornbirds 2007.5 GMC Sierra SLE 2500HD 4x4 - Proud Owner For 15 Yrs - 6.6L V8 Duramax Diesel/Allison 1000, 2" Lift, 33" Mickey Thompson MTZ's. 2008 Yamaha Raptor 700r - Proud Owner For 13 Yrs - ITP Mud Lites. 2015 John Deere 1025R - Proud Owner For 6 Yrs - 24HP Diesel/H120/54D/260B/SB1154. |
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Dec 2000
Location: Greeneville, TN
Posts: 3,095
|
Welcome to the board from another virginian, I am up in the northern part, Just let me know if I can help you with anything.
Bill
__________________
atheystruck@comcast.net 67 1/2 ton 4wd custom cab 72 1/2 ton 4wd super cheyenne 71 1/2 BB super cheyenne shortbed |
![]() |
![]() |
![]() |
#8 |
User #12137
![]() Join Date: Apr 2004
Location: kingsport,upper east tenn
Posts: 11,598
|
at the top of this page there will be welcome (yourname) just under that it sould say private messages
|
![]() |
![]() |
![]() |
#9 |
this guy
Join Date: Apr 2004
Location: Southwest VA
Posts: 122
|
Thanks for the welcome pickup man, yeah you could help me out with something...I need a good interchange manual like I mentioned in my post. Got any ideas? I need something that shows I guess 67-as new as possible. Like right now I'm looking for a brake setup, master cylinder, booster, linkage, etc...and I don't know if I could use the stuff off say a 74 truck or something. Any ideas? Author, title, ISBN number?
|
![]() |
![]() |
![]() |
#10 |
Designated A-hole!
Join Date: Mar 2003
Location: South Mississippi
Posts: 36,450
|
Welcome to the board from South Mississippi! As another dial up sufferer I know your pain! The fenderss without sidemarkers are from a 67.
__________________
"If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. ![]() We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck" |
![]() |
![]() |
![]() |
#11 |
Thats the Hillbilly way
Join Date: Jul 2001
Location: Torrance,Ca
Posts: 5,980
|
Welcome from SoCal
__________________
BILL Torrance Calif 90504 Member DUF Club Member Old Farts Club 72 3/4ton Custom Camper BB402/400 trans Dynomax Cerama-coat headers , Hei distributor ,Edelbrock 1411 air,ps,pb,leafsprings ,98 chevy 60/40 seat,S10 shoulder belts tilt,3.54 Dana 60 rear. 16" Eagle wheels with LT265/75 16 tires,Gaylord Lid,H4 headlights with 100W relay conversion. " If I knew I was going to live this long I would have taken better care of myself " Marriage changes passion...suddenly you're in bed with a relative. A GUY'S PRAYER.... Lord, I pray for a nympho with huge boobs who owns a liquor store and likes to fish and hunt and has a Harley .Amen , |
![]() |
![]() |
![]() |
#12 |
Designated A-hole!
Join Date: Mar 2003
Location: South Mississippi
Posts: 36,450
|
As far as the brakes go for a straight bolt on the booster and linkage from 67-72 will work. For master cylinder you need to keep it drum/drum which is 67-70. I put a booster on my 70 using the same m/c, I just unbolted it from the firewall, slid the booster in between (had to stretch the brake lines a little) and hooked it all back up.
__________________
"If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. ![]() We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck" |
![]() |
![]() |
![]() |
#13 |
this guy
Join Date: Apr 2004
Location: Southwest VA
Posts: 122
|
See! I'm learning already! This is why I'm on this board. I think I just need the booster and linkage...well, whatever you need when the master cylinder is already there anyway, here is a pic underneath the hood, so you tell me. As you can see from the pics, I think I have lots of different years of sheet metal on there. You guys devour these and tell me what I've got and what I dont. As I said, the title says 69.
Last edited by Bleach; 07-27-2004 at 12:08 AM. |
![]() |
![]() |
![]() |
#14 |
this guy
Join Date: Apr 2004
Location: Southwest VA
Posts: 122
|
|
![]() |
![]() |
![]() |
#15 |
Account Suspended
Join Date: Jan 2003
Location: Shadow of Lambeau Field
Posts: 5,597
|
Welcome to the board from Americas Dairyland.
|
![]() |
![]() |
![]() |
#16 |
Registered User
Join Date: Jul 2004
Location: San Antonio, Texas!
Posts: 8
|
the only difference between a c/10 an a k/10 is that k/10 means you have a 4 wheel drive truck...
|
![]() |
![]() |
![]() |
#17 |
Join Date: Dec 1999
Location: Eastern - Manitoba Canada, Winnipeg
Posts: 4,369
|
Welcome to the 67-72 boards.
__________________
Senior active founding member. 70 3/4 ton GMC Suburban 4x4 250/4 spd. 71 1/2 ton Suburban Chevy 4x4, 350/350 72 Chev 1 ton tow truck 402BB w/Holmes 440 wrecker on propane 2005 FLSTSCI Harley Springer 85 FXSB Harley Lowrider 72 Triumph 650 Bonneville 5spd "Poor people don't have hobbies" Quote from wife. |
![]() |
![]() |
![]() |
#18 |
Registered User
Join Date: Jan 2003
Location: Washington State
Posts: 8,834
|
Welcome from SW Washington State...
__________________
1970 Chev CST 2003 Harley Fatboy 1975 Chevrolet Step Van 1956 Chev Bel Air 1977 Blazer 2WD For Sale $3000.00 1978 Blazer 2WD For Sale $7000.00 1978 Silverado 2005 Monte Carlo |
![]() |
![]() |
![]() |
#19 |
Registered User
Join Date: Jan 2002
Location: WATAUGA,TX
Posts: 675
|
Welcome from Texas.
__________________
72 2wd 307/AT/AC/TILT WHEEL 78 JIMMY HIGH SIERRA |
![]() |
![]() |
![]() |
#20 |
Fixing my 67, & loving it
Join Date: Jun 2004
Location: Bridge City, Texas
Posts: 524
|
Welcome from Southeast Texas.
|
![]() |
![]() |
![]() |
#21 |
Post Whore
![]() Join Date: Feb 2000
Location: Rose Hill, KS, USA
Posts: 12,684
|
Welcome. As mentioned above yes your truck is actually a K10 but they were always badged as C/10 - the only vehicle that was badged with the K was the Blazer and all of them are badged K/5, the 2wd Blazers were not badged C/5.
Your transfer case should be the Rockwell T221 and you can get some parts for them still but they are rather expensive. Here is a pic of what the rear side of the T221 looks like.
__________________
1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14 |
![]() |
![]() |
![]() |
#22 |
More Cowbell....
Join Date: Mar 2004
Location: Puckett, MS
Posts: 3,569
|
Welcome from central Mississippi. Home of, well.....I will have to get back to you on that one. Welcome anyway. Good lookin truck you got there.
__________________
There once was a member from Puckett.....Who ( fill in the blank blank blank ) bucket |
![]() |
![]() |
![]() |
#23 |
1971 C20 Custom Camper
Join Date: Mar 2003
Location: Ames/Shenandoah, IA
Posts: 1,435
|
Welcome... That is a very nice looking truck! You're gonna love it...
![]()
__________________
'71 Chevy C20 Custom Camper, 454, TH400 '97 GMC K1500 5.7L |
![]() |
![]() |
![]() |
#24 |
PROJECT 7DEUCE
![]() Join Date: Dec 2002
Location: GRANTS PASS OR
Posts: 21,608
|
Welcome to the board fom southern oregon.. It's a great wealth of knowledge here.
|
![]() |
![]() |
![]() |
#25 |
get up! stand up!
Join Date: Apr 2004
Location: austin,tx
Posts: 345
|
welcome from austin, texas. this board will be your #1 reference for these trucks-welcome and enjoy!
__________________
9FT STEPSIDE CLUB 40 1-1/2 ton stake 67 c30 disassembled & for sale 70 gmc 3500 canadian 9 foot "fenderside" pickup 06 silverado 71 vet enjoyed by my retired father ![]() wtb-67 chevy 1 ton 9ft stepside-in perfect condition |
![]() |
![]() |
![]() |
Bookmarks |
|
|