![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Registered User
Join Date: Dec 2012
Location: Heart of Tennessee
Posts: 1,120
|
![]()
Installing 3 point shoulder belts in truck. The passenger side bolt in the
Pillar broke loose. I have a the bolt halfway in but not tight. Any suggestions on what to do. The whole point of removing lap belts was so my four year Old could ride in His truck. Thanks in advance!! |
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: Jan 2003
Location: daytonabeach
Posts: 22,956
|
Re: Seat belt bolt in B pillar broke loose!
i'd go to the autoparts store and get a new correct bolt and ttry that out
__________________
71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY |
![]() |
![]() |
![]() |
#3 | |
Registered User
Join Date: Dec 2012
Location: Heart of Tennessee
Posts: 1,120
|
Re: Seat belt bolt in B pillar broke loose!
Quote:
Bolt is correct, and threaded halfway. When i "ape'ed" it, it broke loose. Now bolt is half tightened, and internal nut spins. In other words, i put to much torque, and Broke it loose from pillar. Anyone else? |
|
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: May 2008
Location: Eastern Iowa
Posts: 423
|
Re: Seat belt bolt in B pillar broke loose!
Hmmm, Thats a tough one. I just bought one from a member cutting up a cab. It is held in with some spot welds. I'd drill them out and re weld. I can post a picture of what it looks like on the inside if that would help you. That is the cut out piece that I bought
__________________
Matt Garage build http://www.garagejournal.com/forum/s...ead.php?t=6784 My slow but sure truck build http://67-72chevytrucks.com/vboard/s...d.php?t=394924 ![]() My philosophy on tires is the same as cigarettes. "smoke them if you got them" HAPPILY DIVORCED! |
![]() |
![]() |
![]() |
#5 | |
Registered User
Join Date: Dec 2012
Location: Heart of Tennessee
Posts: 1,120
|
Re: Seat belt bolt in B pillar broke loose!
Quote:
|
|
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: May 2008
Location: Eastern Iowa
Posts: 423
|
Re: Seat belt bolt in B pillar broke loose!
This is what is on the inside. depending what welds broke, it might be an easy weld repair
__________________
Matt Garage build http://www.garagejournal.com/forum/s...ead.php?t=6784 My slow but sure truck build http://67-72chevytrucks.com/vboard/s...d.php?t=394924 ![]() My philosophy on tires is the same as cigarettes. "smoke them if you got them" HAPPILY DIVORCED! |
![]() |
![]() |
![]() |
#7 |
Senior Member
![]() Join Date: Jul 2009
Location: Exeter, NH
Posts: 786
|
Re: Seat belt bolt in B pillar broke loose!
Question ! that repair to the hood looks great but how is he going to get behind the pillar??
|
![]() |
![]() |
![]() |
#8 | |
Registered User
Join Date: Dec 2012
Location: Heart of Tennessee
Posts: 1,120
|
Re: Seat belt bolt in B pillar broke loose!
Quote:
I will put a few plug welds to re attach nut to plate. Then hopefully take bolt out, and check threads ( may be reason I had to torque so much) . I may also try cranking it down A Little more. We'll se how far its in, and will it be safe when secured. Thats on a good day, we shall see. |
|
![]() |
![]() |
![]() |
#9 |
Senior Member
![]() Join Date: Jul 2009
Location: Exeter, NH
Posts: 786
|
Re: Seat belt bolt in B pillar broke loose!
It would seem to me that the whole piece is turning as the nut is too big to turn in the bracket. I would think you could drill one small hole near the bolt and stop the bracket from turning which in turn should keep the nut from turning. Maybe I am missing something.
|
![]() |
![]() |
![]() |
Bookmarks |
Tags |
b pillarbolt, broke bolt, pillar bolt, shoulder belt |
|
|