stereo - The 1947 - Present Chevrolet & GMC Truck Message Board Network

pokethesmot · 04-12-2009, 08:26 PM

well i finly got fed up with the stock stereo and i got a aftermarket one for free but now how do i get it too fit is there like a right up for it or anything cuz i cant even get the old one out

**old Rusty C10** · 04-12-2009, 09:19 PM

unless you stick it in the glove box or make some kind of mount for it you will have to cut the dash to get it to fit... there is a bolt underneath the dash and the two nuts on the radio knob shafts to remove your old one.. you may want to invest the bucks in the kit that clips to the existing wiring so you dont have to cut your harness too

AceX · 04-13-2009, 01:24 AM

AFAIK, there isn't a kit that doesn't require cutting for our trucks, but I may be wrong.

You will need an install kit though. Some ABS plastic wouldn't hurt either...

Check out the "Truck Audio" section for a wiring diagram.

pokethesmot · 04-13-2009, 07:07 AM

Quote:

Originally Posted by AceX

AFAIK, there isn't a kit that doesn't require cutting for our trucks, but I may be wrong.

You will need an install kit though. Some ABS plastic wouldn't hurt either...

Check out the "Truck Audio" section for a wiring diagram.

what kit do you have

AceX · 04-13-2009, 08:10 PM

Standard 1-DIN mounting "cage", trim ring from Pioneer, and some custom cut ABS plastic. There's a small mounting bracket on the back side of the unit as well for added support.

The head unit comes with a wiring harness that was spliced into the factory harness because there simply wasn't/isn't a plug-and-play harness available.

heavychevy79 · 04-14-2009, 03:42 AM

I can install one without all that plastic and other hobby lobby stuff, but I notch the trim little bit. The ones I've done look perfect but it took more time than a audio install shop would want to spend.

You can do it, but you will have to cut the dash and bezel.
Try looking for the same bezel as yours at the junkyard, but with the hole for the stereo allready cut out, that would save you some trouble.

Use the cage to mark the area you want cut out, but make sure it will line up with the hole in the bezel.
I usually cut the top and bottom of the area, then fold the metal "flaps" back to the inside.

I think there is a plug n play adapter like Rusty said, but are your original speakers worth useing?

Poke, don't try to use a hand saw or tin snips, it will look retarded.

pokethesmot · 04-14-2009, 09:41 AM

well i got my old stereo out and yeah my speakers are worth using there new but ive found a place to mount the stereo its gunna be a surprise

heavychevy79 · 04-26-2009, 04:44 AM

Poke, have you finished the stereo install?
I'm getting antsy for the surprise.

pokethesmot · 04-26-2009, 06:12 AM

oh yeah its all done and i have a custom fiber glass box too also i just got done the other day ripping out all my rubber mat and bed lining the floor i just have to find some batteries so i can take some pics

pokethesmot · 04-26-2009, 12:15 PM

well i snapped a pic of my stereo and it isn't fully finished cuz i still need to put that black thing around it that hides the edges and i am probably snap the pic of the custom fiberglass box later but here is the head unit

heavychevy79 · 04-26-2009, 12:52 PM

Dude that is awesome, I am surprised!

I've never seen one put there.
You just need some zip ties and split loom to clean up the wiring haning down.

But what about the old radio hole?

pokethesmot · 04-26-2009, 01:06 PM

Quote:

Originally Posted by heavychevy79

Dude that is awesome, I am surprised!

I've never seen one put there.
You just need some zip ties and split loom to clean up the wiring haning down.

But what about the old radio hole?

yeah i was gunna do that today lol and im putting a cb/pa system in that hole

pokethesmot · 04-26-2009, 01:20 PM

here is my sub

bumslie75 · 04-26-2009, 03:29 PM

Looking good i like where you put the deck. Did you make the speaker box yourself

pokethesmot · 04-26-2009, 03:39 PM

Quote:

Originally Posted by bumslie75

Looking good i like where you put the deck. Did you make the speaker box yourself

thanks man and naw my brother Andrew made me the box its was the first thing he ever fiber glassed

pezzy · 04-26-2009, 04:46 PM

I skipped the extra piece of plastic route and just fit it in where the old radio was...

just ignore the dashboard (that's next on my list)

dammitmitchell · 04-26-2009, 03:29 PM

i love u and all pokes..
but that is the scariest looking sub box he he he
where's yoru amp hiding?

pokethesmot · 04-26-2009, 03:38 PM

Quote:

Originally Posted by dammitmitchell

i love u and all pokes..
but that is the scariest looking sub box he he he
where's yoru amp hiding?

in the bottom right corner of the pic you can see the corner of it lol

04-12-2009, 08:26 PM	#1
pokethesmot profeshinaly unimployed Join Date: Dec 2008 Location: hazlehurst, GA Posts: 1,232	stereo well i finly got fed up with the stock stereo and i got a aftermarket one for free but now how do i get it too fit is there like a right up for it or anything cuz i cant even get the old one out __________________ my ride click here my myspace "having mud flaps is like asking for a smaller trophy"

04-12-2009, 09:19 PM	#2
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,307	Re: stereo unless you stick it in the glove box or make some kind of mount for it you will have to cut the dash to get it to fit... there is a bolt underneath the dash and the two nuts on the radio knob shafts to remove your old one.. you may want to invest the bucks in the kit that clips to the existing wiring so you dont have to cut your harness too __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

04-13-2009, 01:24 AM	#3
AceX >130dB Moderator Join Date: Aug 2006 Location: Sacramento, CA Posts: 2,130	Re: stereo AFAIK, there isn't a kit that doesn't require cutting for our trucks, but I may be wrong. You will need an install kit though. Some ABS plastic wouldn't hurt either... Check out the "Truck Audio" section for a wiring diagram. __________________ Living Life @ 130dB LED Tail Light Conversion; How-to Friend. Father. Brother. RIP El Jay ------------------------------------------------------------------------------------------------------------------------- CLICK HERE and for less than $0.07 a day, you too can help support and build a better forum.

04-13-2009, 08:10 PM	#5
AceX >130dB Moderator Join Date: Aug 2006 Location: Sacramento, CA Posts: 2,130	Re: stereo Standard 1-DIN mounting "cage", trim ring from Pioneer, and some custom cut ABS plastic. There's a small mounting bracket on the back side of the unit as well for added support. The head unit comes with a wiring harness that was spliced into the factory harness because there simply wasn't/isn't a plug-and-play harness available. __________________ Living Life @ 130dB LED Tail Light Conversion; How-to Friend. Father. Brother. RIP El Jay ------------------------------------------------------------------------------------------------------------------------- CLICK HERE and for less than $0.07 a day, you too can help support and build a better forum.

04-14-2009, 03:42 AM	#6
heavychevy79 Cheyenne Super Join Date: Nov 2008 Location: Dallas Texas Posts: 545	Re: stereo I can install one without all that plastic and other hobby lobby stuff, but I notch the trim little bit. The ones I've done look perfect but it took more time than a audio install shop would want to spend. You can do it, but you will have to cut the dash and bezel. Try looking for the same bezel as yours at the junkyard, but with the hole for the stereo allready cut out, that would save you some trouble. Use the cage to mark the area you want cut out, but make sure it will line up with the hole in the bezel. I usually cut the top and bottom of the area, then fold the metal "flaps" back to the inside. I think there is a plug n play adapter like Rusty said, but are your original speakers worth useing? Poke, don't try to use a hand saw or tin snips, it will look retarded.

04-14-2009, 09:41 AM	#7
pokethesmot profeshinaly unimployed Join Date: Dec 2008 Location: hazlehurst, GA Posts: 1,232	Re: stereo well i got my old stereo out and yeah my speakers are worth using there new but ive found a place to mount the stereo its gunna be a surprise __________________ my ride click here my myspace "having mud flaps is like asking for a smaller trophy"

04-26-2009, 04:44 AM	#8
heavychevy79 Cheyenne Super Join Date: Nov 2008 Location: Dallas Texas Posts: 545	Re: stereo Poke, have you finished the stereo install? I'm getting antsy for the surprise.

04-26-2009, 06:12 AM	#9
pokethesmot profeshinaly unimployed Join Date: Dec 2008 Location: hazlehurst, GA Posts: 1,232	Re: stereo oh yeah its all done and i have a custom fiber glass box too also i just got done the other day ripping out all my rubber mat and bed lining the floor i just have to find some batteries so i can take some pics __________________ my ride click here my myspace "having mud flaps is like asking for a smaller trophy"

04-26-2009, 12:15 PM	#10
pokethesmot profeshinaly unimployed Join Date: Dec 2008 Location: hazlehurst, GA Posts: 1,232	Re: stereo well i snapped a pic of my stereo and it isn't fully finished cuz i still need to put that black thing around it that hides the edges and i am probably snap the pic of the custom fiberglass box later but here is the head unit __________________ my ride click here my myspace "having mud flaps is like asking for a smaller trophy"

04-26-2009, 12:52 PM	#11
heavychevy79 Cheyenne Super Join Date: Nov 2008 Location: Dallas Texas Posts: 545	Re: stereo Dude that is awesome, I am surprised! I've never seen one put there. You just need some zip ties and split loom to clean up the wiring haning down. But what about the old radio hole?

04-26-2009, 01:20 PM	#13
pokethesmot profeshinaly unimployed Join Date: Dec 2008 Location: hazlehurst, GA Posts: 1,232	Re: stereo here is my sub __________________ my ride click here my myspace "having mud flaps is like asking for a smaller trophy"

04-26-2009, 03:29 PM	#14
bumslie75 Registered User Join Date: Apr 2009 Location: Reedley Ca Posts: 360	Re: stereo Looking good i like where you put the deck. Did you make the speaker box yourself

04-26-2009, 04:46 PM	#16
pezzy Registered User Join Date: Jun 2008 Location: Utah Posts: 18	Re: stereo I skipped the extra piece of plastic route and just fit it in where the old radio was... just ignore the dashboard (that's next on my list)

04-26-2009, 03:29 PM	#17
dammitmitchell the pollock Join Date: May 2008 Location: abilene, texas Posts: 4,423	Re: stereo i love u and all pokes.. but that is the scariest looking sub box he he he where's yoru amp hiding? __________________ Jack of ALL trades, Master of none.. (but one... procrastination) Army vet 02-08 RIP El Jay! Miss you brother! http://67-72chevytrucks.com/vboard/s...d.php?t=343538 http://67-72chevytrucks.com/vboard/s...d.php?t=386042



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.