![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Registered User
Join Date: Apr 2001
Location: Pendleton, OR USA
Posts: 37
|
M&H front lighting wiring harness w/ alt conversion
Hello all,
I've installed an M&H front lighting wiring harness w/ alternator conversion on my 72 K20 (# 38929). There's an "L" shaped metal bracket about 5" back from the end of the alternator connections. Does anyone know where this bracket is supposed to attach / mount? Thanks for your help and suggestions. |
![]() |
![]() |
![]() |
#2 |
Old Skool Club
![]() Join Date: Jun 2001
Location: Benton, AR "The Heart of Arkansas"
Posts: 10,880
|
Re: M&H front lighting wiring harness w/ alt conversion
It mounts to one of the bolts that go through the alternator, to keep the harness from getting into something that you don't want it to.
Just find the bolt that is closest to where that bracket is located and that's where it will best work.
__________________
Member Nr. 2770 '96 GMC Sportside; 4.3/SLT - Daily driven....constantly needs washed. '69 C-10 SWB; 350/TH400 - in limbo The older I get, the better I was. |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Apr 2001
Location: Pendleton, OR USA
Posts: 37
|
Re: M&H front lighting wiring harness w/ alt conversion
Hi ChevLoRay,
Thanks for your reply. I'm not sure why, but there isn't a thru-bolt anywhere near where this bracket would reach. Do you have a picture of one of these harnesses w/ the bracket mounted? Thanks again for your reply. Monty Robison |
![]() |
![]() |
![]() |
#4 |
Project Junkie! Fishing Poor!!
![]() Join Date: Dec 1999
Location: Olympia,Wa. 98512
Posts: 10,770
|
Re: M&H front lighting wiring harness w/ alt conversion
That bracket is supposed to be mounted to the top left water pump bolt. (Right side as you face it.) This bolt normaly has a hex head and a stud beond that. The bracket bolts to that stud. WES
__________________
On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys |
![]() |
![]() |
![]() |
#5 |
Project Junkie! Fishing Poor!!
![]() Join Date: Dec 1999
Location: Olympia,Wa. 98512
Posts: 10,770
|
Re: M&H front lighting wiring harness w/ alt conversion
Here is a picture of one mounted. I circled the bracket. WES
__________________
On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys |
![]() |
![]() |
![]() |
#6 |
1969 Short, Fleet, and Beat
Join Date: Apr 2007
Location: Long Beach, Ca.
Posts: 867
|
Re: M&H front lighting wiring harness w/ alt conversion
How do you guys like you M&H wiring harness and how much did it cost?
I used them on another project and was very happy. |
![]() |
![]() |
![]() |
#7 |
The LuvShack Garage
Join Date: Jan 2004
Location: Maple Grove, TN (West Side)
Posts: 30,477
|
Re: M&H front lighting wiring harness w/ alt conversion
Mine fits perfectly, had OE connectors, and works flawlessly
![]()
__________________
Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T |
![]() |
![]() |
![]() |
#8 |
What?
Join Date: Jun 2007
Location: Southern California
Posts: 7,617
|
Re: M&H front lighting wiring harness w/ alt conversion
I had terrible luck with M&H products! Spent days trying to figure out why things were not working correctly, found out that the plug to my rear harness under the dash was pinned out incorrectly. That and the ignition switch was pinned out incorrectly as well, explaning why I couldn't turn the trunk on from the key.
M&H is only about 40 or 50 miles from me, so I took my old harness and the new harness they built to show them. They were very apologetic, and repinned everything for me while I waited. Getting the harness back in, I still had issues and they worked with me over the phone testing every circuit. I still have issues, but it looks like it's all ground related. Being that M&H worked with me in such detail, spending hours over the phone with me testing every single circuit. I have to hand it to them that they sorta redeemed themselves to me, so I would go back to them if I had another wiring need. On a side note, I purchased this stuff from OC Truck&Car shop. When I called them to complain, all they did was tell me to call M&H and take it up with them! I said I didn't want to, and I want an exchange. They refused, and just told me to take it up with M&H. Talk about customer service...
__________________
Chris 1968 K20 Suburban 1972 K10 LWB PU |
![]() |
![]() |
![]() |
#9 |
Registered User
Join Date: Apr 2001
Location: Pendleton, OR USA
Posts: 37
|
Re: M&H front lighting wiring harness w/ alt conversion
WES,
Thanks for your reply and the photo. I'm a little confused though. The bracket and portion of the harness in your picture appear to go on up and accross between the intake and the valve cover. The alternator portion of the harness I have has 2 plastic push-in connectors taped into the harness that snap into 1 hole just below the headlight bucket and also to 1 in the lower center protion of the left inner wheel well. Am I routing this harness wrong? It isn't long enough to take the route you show in the Picture. Please advise if possible. Thanks! Monty |
![]() |
![]() |
![]() |
#10 | ||
Sierra Grande Club
Join Date: Jan 2007
Location: New Mexico USA
Posts: 2,433
|
Re: M&H front lighting wiring harness w/ alt conversion
Quote:
Quote:
Unfortunately I have sent my forward light harness back to M&H for headlight relay upgrade, so I have no pictures to show..... ![]() s/t
__________________
1971 GMC Sierra Grande, 1/2 ton short wide, original 4 bolt 010 020 block & heads. (matching #'s). 383 stroker, SMI q jet 750 cfm, Lunati Voodoo 60102 cam, Scorpion roller rockers, Spin Tech pro street mufflers with X pipe. ![]() Last edited by Sport/Truck; 10-11-2008 at 05:46 PM. |
||
![]() |
![]() |
![]() |
#11 |
Project Junkie! Fishing Poor!!
![]() Join Date: Dec 1999
Location: Olympia,Wa. 98512
Posts: 10,770
|
Re: M&H front lighting wiring harness w/ alt conversion
Sorry for the confusion, I do not know what I was thinking. The wire in my picture is the temprature sending unit wire. ChevLoRay was right. It goes to a bolt on the back of the alternator, so that the wires are not just hanging by their terminals. WES
__________________
On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys |
![]() |
![]() |
![]() |
#12 |
Senior Member
![]() Join Date: Feb 2002
Location: Tucson, AZ USA
Posts: 7,286
|
Re: M&H front lighting wiring harness w/ alt conversion
I got an M&H front engine harness back in 2001 for my '71 Jimmy --V8 350,manual,dual headlights,ext volt reg. Worked fine. Fit perfect. Cured a floating ground problem. Was just like factory harness but 30-something years younger and flexible. It wasn't cheap. I got it from Brothers or LMC... Can't remember.
Harness had a tag signed by the guy who built it. I never needed recourse to customer service. Monty: Do you have a short water pump or the long water pump? The delcotron [alternator] is up high on the driver's side with the short water pump configuration. On the later ['69 or '70] V8s with the long water pump, the alternator was on the passenger side and low. The wiring guys need to know which way your truck is rigged. Even though my GMC is a '71, for whatever reason [PO's backyard modification?] the 350 was set up like a '68 vintage, with the short water pump.
__________________
Every 25 years I like to rebuild that 292, whether it needs it or not. Last edited by '68OrangeSunshine; 10-11-2008 at 06:27 AM. |
![]() |
![]() |
![]() |
#13 |
Registered User
Join Date: Aug 2001
Location: Santa Fe Springs, CA,USA
Posts: 1,579
|
Re: M&H front lighting wiring harness w/ alt conversion
M and H is 10 minutes from my house. I've walked in and ordered in their office. Always been cool guys to deal with
__________________
70 shortbed stepside "Schleprock" 350 w/TH400 rallys and BFGs -We can rebuild it, we have the technology-lower,shinier,faster |
![]() |
![]() |
![]() |
#14 |
Senior Member
![]() Join Date: Jan 2000
Location: LHC, AZ
Posts: 385
|
Re: M&H front lighting wiring harness w/ alt conversion
Mine fit perfect. With HEI and internal alt setup.
__________________
70 Jimmy 4x4 71 GMC 2500 Too bad stupidity isn't painful |
![]() |
![]() |
![]() |
#15 |
Senior Member
![]() Join Date: Feb 2002
Location: Tucson, AZ USA
Posts: 7,286
|
Re: M&H front lighting wiring harness w/ alt conversion
I'm better at old electrical systems than this modern computer crap. I'll try to shoot some pix with my new digital cam and post them, but when I tried to send some JPEG pix over email last year my earthlink dial-up couldn't swallow it. So no promises.
__________________
Every 25 years I like to rebuild that 292, whether it needs it or not. |
![]() |
![]() |
![]() |
#16 |
Registered User
Join Date: Apr 2001
Location: Pendleton, OR USA
Posts: 37
|
Re: M&H front lighting wiring harness w/ alt conversion
To all,
I'm going to try and attach some pictures of my alternator. Hopefully this will unlock the mystery of where the harness bracket is supposed to mount. I'll look forward to any and all suggestions. Thanks! Monty Robison |
![]() |
![]() |
![]() |
#17 |
Registered User
Join Date: Apr 2001
Location: Pendleton, OR USA
Posts: 37
|
Re: M&H front lighting wiring harness w/ alt conversion
Here's one more picture showing the connectors and the bracket. Thanks for all of your help and suggestions.
Monty Robison |
![]() |
![]() |
![]() |
#18 |
Senior Member
![]() Join Date: Feb 2002
Location: Tucson, AZ USA
Posts: 7,286
|
Re: M&H front lighting wiring harness w/ alt conversion
I see the problem, Monty. You don't have the usual alternator for a '67-'72. That may be an internal regulator Delcotron ['73-'87]. The tip off is the flat connctor for the "F" and Relay terminals. On an external regulator alternator, the connector is square and the F and Relay terminals are side-by-side, not inline. Also the case has no 1/16"x1/2 slot adjacent to the GRD terminal for the grounding bracket. No wonder you guys are having trouble.
Although you might try fitting the ground bracket hole over the GRD terminal stud and see if there is not a slot within its radius -- outboard, about 1 or 2 O' Clock.. I tried to shoot pix of both my alternators, one on a 292 L6 and one on a V8 350, but my cheap Samsung digital camera won't work, even after I sent it back for service.
__________________
Every 25 years I like to rebuild that 292, whether it needs it or not. Last edited by '68OrangeSunshine; 10-18-2008 at 06:30 AM. |
![]() |
![]() |
![]() |
#19 |
Registered User
Join Date: Apr 2001
Location: Pendleton, OR USA
Posts: 37
|
Re: M&H front lighting wiring harness w/ alt conversion
68OrangeSunshine,
Thanks for your reply. I knew there had to be something strange going on. However, as you can see from the harness connector picture, this M & H harness was built specifically for a conversion to an internally regulated alternator. I've talked to tech support at M & H, but all they tell me is that the harness is built exactly like the original, including the bracket, with the exception of the wiring changes to accomodate an internally regulated alternator. They don't have any idea where the bracket is supposed to mount. I'll have a closer look and see if I can't come up with some way to mount it. I suppose pulling the rear half of the alternator housing off and drilling / tapping a 10-32 or 10-24 hole would be too risky, but we'll see. Thanks again and if you come up with any more ideas please let me know. Thanks again! Monty Robison |
![]() |
![]() |
![]() |
#20 |
Old Skool Club
![]() Join Date: Jun 2001
Location: Benton, AR "The Heart of Arkansas"
Posts: 10,880
|
Re: M&H front lighting wiring harness w/ alt conversion
Before doing that, what is the possibility of getting a longer bolt, same thread/pitch and using a spacer to enable you in installing it to one of the existing bolts? It may be that cutting off a portion of the clamp is possible, too. Clearly, to me, the difference in the way the alternator assembles is the reason the clamp does not work as intended in the original configuration. A little modification of what you have (the clamp) is better (to me) than re-configuring the alternator. If you do that, and you have to replace that alternator, you'll have it to do again. Just modify the clamp and make it work with what you have and you'll be good to go with replacement units.
__________________
Member Nr. 2770 '96 GMC Sportside; 4.3/SLT - Daily driven....constantly needs washed. '69 C-10 SWB; 350/TH400 - in limbo The older I get, the better I was. |
![]() |
![]() |
![]() |
#21 |
Registered User
Join Date: Apr 2001
Location: Pendleton, OR USA
Posts: 37
|
Re: M&H front lighting wiring harness w/ alt conversion
ChevLoRay,
Thanks for your comment. I think you're right and I'll just have to get a longer alternator housing bolt and build a spacer to mount the bracket. I guess I just assumed that M & H had this all factored in when they designed the harness with the internal regulator wiring modifications and the bracket they supply was intended to mount in a specific location on an internally regulated alternator. It's obvious to me now that the original regulator has an entirely different housing design and rear configuration. If I come up with some "slick" way to do this I'll be sure and post it for all. Thanks again! Monty |
![]() |
![]() |
![]() |
#22 |
Senior Member
![]() Join Date: Feb 2002
Location: Tucson, AZ USA
Posts: 7,286
|
Re: M&H front lighting wiring harness w/ alt conversion
Look, you shouldn't have to open the alternator case. Just hack off the last half inch of the ground bracket and forget about it.
I'm surprised that there isn't some crevice the angle end falls into, but if not it's no big thing.
__________________
Every 25 years I like to rebuild that 292, whether it needs it or not. |
![]() |
![]() |
![]() |
#23 |
Registered User
Join Date: Apr 2001
Location: Pendleton, OR USA
Posts: 37
|
Re: M&H front lighting wiring harness w/ alt conversion
68OrangeSunshine,
I'm not going to open up the case. I'll figure out a way to mount the bracket even of it means cutting or modifying it somehow. I'll post a pic when I get it done. Thanks again! Monty |
![]() |
![]() |
![]() |
#24 |
Senior Member
![]() Join Date: Feb 2002
Location: Tucson, AZ USA
Posts: 7,286
|
Re: M&H front lighting wiring harness w/ alt conversion
I gonna try and post some pix. Shots of real Delcotrons in actual running trucks.
One view from under the 4Bbl carb, on an L6 [stock wiring, with HELP reapair bits as necessary...] ('68-C/10). Other view is on '71 GMC w/ V8 and M&H product harness. Another shot of the 292, from side. . ![]() Guess I'll have to hotsplice the pix off the digiccam again> Dang this newfangled X#$%$^^ [Edit: upload failed. I'll try later.]
__________________
Every 25 years I like to rebuild that 292, whether it needs it or not. Last edited by '68OrangeSunshine; 10-26-2008 at 06:23 PM. |
![]() |
![]() |
![]() |
#25 |
Sierra Grande Club
Join Date: Jan 2007
Location: New Mexico USA
Posts: 2,433
|
Re: M&H front lighting wiring harness w/ alt conversion
Monty Nice job! When i get my harness back I'll see if I need to do what you did.
s/t
__________________
1971 GMC Sierra Grande, 1/2 ton short wide, original 4 bolt 010 020 block & heads. (matching #'s). 383 stroker, SMI q jet 750 cfm, Lunati Voodoo 60102 cam, Scorpion roller rockers, Spin Tech pro street mufflers with X pipe. ![]() |
![]() |
![]() |
![]() |
Bookmarks |
|
|