TN Need Several AC/Heater parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

stormtown · 07-27-2018, 08:55 PM

Can anyone help with origianl evap box for firewall intact?
Mounting studs with clips for inside heater box coming through firewall?
Good interior heater box?

**clay68c10** · 07-30-2018, 01:54 PM

I think I have all of that, I will check tonight

**clay68c10** · 07-30-2018, 09:21 PM

It’s all sun faded but usable. The evaporator case side cover has some cracks but it is repairable. I can epoxy it if you are interested.
The blend door flap and rubber are good.
The metal has surface rust but no holes I can see.
I have a heater core that looks beat but pressure tested ok (20psi for 2hr).
$120 shipped??

**clay68c10** · 07-30-2018, 09:24 PM

Inside case

**1971Stepside** · 07-30-2018, 10:18 PM

I have all of this if you didn’t buy clays let me know.

**Njeiv** · 07-30-2018, 11:34 PM

I have a NOS A/C diverter box if you need one.

stormtown · 07-31-2018, 06:19 AM

Thanks but my evap box is in a little better shape. Also has a crack on same side yours does and my metal is in better shape. Thank you for responding though

**Eagle9502** · 07-31-2018, 09:07 AM

Quote:

Originally Posted by Njeiv

I have a NOS A/C diverter box if you need one.

Please PM me price on diverter box, if Stormtown doesn't need it.

**clay68c10** · 07-31-2018, 08:59 AM

Sure.
If yours has cracks, epoxy works well to repair it. I’ve done a couple and it has held up.

**1971Stepside** · 07-31-2018, 10:26 AM

Here are the AC parts that I have. All off a 72. All in great shape with no cracks. They have sat in my barn and are dirty. I didn't have time to clean them up before I took the pics this morning, but I can give them a bath before sending them. I have the outside box with fan motor, and core. Inside box is good with no cracks and also has core. I have center vent. On a side note, I have some other AC parts (aluminum piping for condenser, etc. if you want that. I'm assuming shipping will be a lot since this stuff is bulky and heavy. I'm in SW MO, so not sure where in TN you are. I'm thinking $250 for all of it.

**clay68c10** · 07-31-2018, 11:31 AM

If the OP passes on the flap/diverter box, I'd be interested, if it's not broken.

**1971Stepside** · 07-31-2018, 03:47 PM

May have these sold locally. I will know shortly. Just want to be on the up and up.

**1971Stepside** · 07-31-2018, 06:57 PM

Mine are SOLD

stormtown · 08-01-2018, 04:49 PM

okay 71stepside. Thanks. Was getting prices for benny on redo. It would have been cost prohibitive by the time I bought, shipped, shipped to benny, reconditioned, shipped back, whew. Tired just thinking about that stuff.

07-27-2018, 08:55 PM	#1
stormtown Registered User Join Date: Jul 2018 Location: morristown, tn Posts: 66	Need Several AC/Heater parts Can anyone help with origianl evap box for firewall intact? Mounting studs with clips for inside heater box coming through firewall? Good interior heater box?

07-30-2018, 01:54 PM	#2
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,935	Re: Need Several AC/Heater parts I think I have all of that, I will check tonight __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ

07-30-2018, 09:21 PM	#3
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,935	Re: Need Several AC/Heater parts It’s all sun faded but usable. The evaporator case side cover has some cracks but it is repairable. I can epoxy it if you are interested. The blend door flap and rubber are good. The metal has surface rust but no holes I can see. I have a heater core that looks beat but pressure tested ok (20psi for 2hr). $120 shipped?? Attached Images __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ

07-30-2018, 09:24 PM	#4
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,935	Re: Need Several AC/Heater parts Inside case Attached Images __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ

07-30-2018, 10:18 PM	#5
1971Stepside Almost Satisfied Join Date: Mar 2002 Location: Springfield, MO Posts: 2,932	Re: Need Several AC/Heater parts I have all of this if you didn’t buy clays let me know. __________________ 1971 C10 Stepside. LSx 6.0 with BTR Stage IV, Speed Engineering Headers, 4L80e transmission w/3200 Circle-D Stall. 3.73. Posi. Purchased this truck when I was 17. I started the rebuild (or take apart) in 1993. I have drug it around all over the country in pieces. Finally back on the road in 2021. "I can't complain, but sometimes I still do. Life's been good to me so far."

07-30-2018, 11:34 PM	#6
Njeiv “On The Hunt” Join Date: Feb 2018 Location: Richfield, WI Posts: 517	Re: Need Several AC/Heater parts I have a NOS A/C diverter box if you need one.

07-31-2018, 06:19 AM	#7
stormtown Registered User Join Date: Jul 2018 Location: morristown, tn Posts: 66	Re: Need Several AC/Heater parts Thanks but my evap box is in a little better shape. Also has a crack on same side yours does and my metal is in better shape. Thank you for responding though

07-31-2018, 08:59 AM	#9
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,935	Re: Need Several AC/Heater parts Sure. If yours has cracks, epoxy works well to repair it. I’ve done a couple and it has held up. __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ

07-31-2018, 10:26 AM	#10
1971Stepside Almost Satisfied Join Date: Mar 2002 Location: Springfield, MO Posts: 2,932	Re: Need Several AC/Heater parts Here are the AC parts that I have. All off a 72. All in great shape with no cracks. They have sat in my barn and are dirty. I didn't have time to clean them up before I took the pics this morning, but I can give them a bath before sending them. I have the outside box with fan motor, and core. Inside box is good with no cracks and also has core. I have center vent. On a side note, I have some other AC parts (aluminum piping for condenser, etc. if you want that. I'm assuming shipping will be a lot since this stuff is bulky and heavy. I'm in SW MO, so not sure where in TN you are. I'm thinking $250 for all of it. Attached Images __________________ 1971 C10 Stepside. LSx 6.0 with BTR Stage IV, Speed Engineering Headers, 4L80e transmission w/3200 Circle-D Stall. 3.73. Posi. Purchased this truck when I was 17. I started the rebuild (or take apart) in 1993. I have drug it around all over the country in pieces. Finally back on the road in 2021. "I can't complain, but sometimes I still do. Life's been good to me so far."

07-31-2018, 11:31 AM	#11
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,935	Re: Need Several AC/Heater parts If the OP passes on the flap/diverter box, I'd be interested, if it's not broken. __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ Last edited by clay68c10; 07-31-2018 at 01:58 PM.

07-31-2018, 03:47 PM	#12
1971Stepside Almost Satisfied Join Date: Mar 2002 Location: Springfield, MO Posts: 2,932	Re: Need Several AC/Heater parts May have these sold locally. I will know shortly. Just want to be on the up and up. __________________ 1971 C10 Stepside. LSx 6.0 with BTR Stage IV, Speed Engineering Headers, 4L80e transmission w/3200 Circle-D Stall. 3.73. Posi. Purchased this truck when I was 17. I started the rebuild (or take apart) in 1993. I have drug it around all over the country in pieces. Finally back on the road in 2021. "I can't complain, but sometimes I still do. Life's been good to me so far."

07-31-2018, 06:57 PM	#13
1971Stepside Almost Satisfied Join Date: Mar 2002 Location: Springfield, MO Posts: 2,932	Re: Need Several AC/Heater parts Mine are SOLD __________________ 1971 C10 Stepside. LSx 6.0 with BTR Stage IV, Speed Engineering Headers, 4L80e transmission w/3200 Circle-D Stall. 3.73. Posi. Purchased this truck when I was 17. I started the rebuild (or take apart) in 1993. I have drug it around all over the country in pieces. Finally back on the road in 2021. "I can't complain, but sometimes I still do. Life's been good to me so far."

08-01-2018, 04:49 PM	#14
stormtown Registered User Join Date: Jul 2018 Location: morristown, tn Posts: 66	Re: Need Several AC/Heater parts okay 71stepside. Thanks. Was getting prices for benny on redo. It would have been cost prohibitive by the time I bought, shipped, shipped to benny, reconditioned, shipped back, whew. Tired just thinking about that stuff.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.