![]() |
|
![]() |
#1 |
Registered User
Join Date: May 2001
Location: Wairarapa, New Zealand.
Posts: 782
|
41DegreesSouth Build Thread
Not another build thread!
Made a little progress today. A practice run, ready for when my 'new' cab arrives. Just had to share, knew it would make you laugh!! Well, I thought it was pretty funny anyway. Sorting gear linkage next, then moving the right side wiper over then, well plenty to do! Bill. |
![]() |
![]() |
![]() |
#2 |
BlahBlahBlah
Join Date: Feb 2002
Location: Wa.
Posts: 19,863
|
Re: 41DegreesSouth Build Thread
Converting to right hand drive...now that looks like its going to take some work
|
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Sep 2003
Location: Franconia,N.H.
Posts: 1,029
|
Re: 41DegreesSouth Build Thread
thats awesome looks like you got some work ahead of ya
__________________
(Only) Member of the CPNE Fan Club ![]() ![]() 67 C-10 350 with 3-speed tranny and 308 gears swb step ![]() 82 Z28 Camaro 355 small block over 350 hp and a borg warner super t-10 (blown engine) 72 Chevy K20 Suburban (future project) 70 Chevy K20 now 68 GMC K2500 2003 Chevy 2500hd ccsb 4X4 (daily driver) |
![]() |
![]() |
![]() |
#4 |
I am a Referee of life.
Join Date: Jun 2000
Location: Greensboro N.C.
Posts: 13,993
|
Re: 41DegreesSouth Build Thread
Are you going to swap the firewall you have to the new cab?It looks like that would be easier to do than getting the panels located correctly.Either way looks like tons of fun.
__________________
The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil" |
![]() |
![]() |
![]() |
#5 |
Senior Member
Join Date: Dec 2004
Location: Southern Pines NC
Posts: 3,853
|
Re: 41DegreesSouth Build Thread
I think your pix got reversed when you posted them................some nice work!
|
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Oct 2006
Location: Porterville, CA
Posts: 146
|
Re: 41DegreesSouth Build Thread
|
![]() |
![]() |
![]() |
#7 |
Registered User
![]() Join Date: Mar 2006
Location: Pensacola, FL
Posts: 1,461
|
Re: 41DegreesSouth Build Thread
GL with the project! I was getting dizzy looking at your pics, my brain kept trying to switch everything to the other side!
__________________
1986 C10 - LWB, 305/700r4, posi, vortec heads |
![]() |
![]() |
![]() |
#8 | |
Texas Big Wig
Join Date: Jan 2007
Location: Mineola, Texas
Posts: 5,620
|
Re: 41DegreesSouth Build Thread
Quote:
Get a old bug instead ![]() |
|
![]() |
![]() |
![]() |
#9 |
Senior Member
Join Date: Apr 2000
Location: Delta,Pa
Posts: 14,950
|
Re: 41DegreesSouth Build Thread
looking good.going back together is the easy part everything is clean or new.just remember to take your time and do everything exactly how you want it. you will kick yourself in the a$$ later if you rush along and skip things that you wanted to do and were very easy to while it was all apart
__________________
Owner of North Point Car Care in Dundalk Md. We specialize in custom exhaust on both modern and classic vehicles. We are a full service auto shop from classics to modern vehicles. Feel free to contact me with questions. I will give a 10% discount to any board member. |
![]() |
![]() |
![]() |
#10 |
WTB this ad
Join Date: Sep 2004
Location: Lafayette Georgia
Posts: 5,074
|
Re: 41DegreesSouth Build Thread
Quite an undertaking you have going there! So, how are you going to make the heat/AC work out? Are you going to use something like one of the custom setups that Vintage Air sells? I noticed you had swapped the panel that the factory heater box bolts to from one side to the other but I didn't know what your intentions were. It would seem that even if the outer box managed to clear the engine you would still be high and dry on the inside. I'm not second guessing your project, I just didn't see this mentioned and was curious what your plans were. Great Job!
|
![]() |
![]() |
![]() |
#11 |
Happy to be here
![]() Join Date: Mar 2000
Location: Cypress, TX
Posts: 39,023
|
Re: 41DegreesSouth Build Thread
I know your not doing it because it's cool, but that's cool. Wouldn't it be beeter to leave it stock so it would stand out in New Zealand ?
__________________
Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra" |
![]() |
![]() |
![]() |
#12 |
Designated A-hole!
Join Date: Mar 2003
Location: South Mississippi
Posts: 36,450
|
Re: 41DegreesSouth Build Thread
What're your plans for carb linkage (cable I assume) and shift linkage?
__________________
"If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. ![]() We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck" |
![]() |
![]() |
![]() |
#13 |
Registered User
Join Date: Feb 2004
Location: Tacoma WA
Posts: 1,365
|
Re: 41DegreesSouth Build Thread
In the "FACTORY ASSEMBLY MANUAL" right hand drive is covered in quite a bit of detail. My brother is into vintage auto racing(British open wheel cars) and would love to have a right hand drive car transporter(67-72 vintage).
Personally I would like just the right hand drive wiper set-up but it requires a right hand drive cowl piece along with the longer linkage.
__________________
67 C-20 LWB, tilt, speed alert, vac, 454, T400 67 C-10 SWB, factory air with more to follow |
![]() |
![]() |
![]() |
#14 |
Registered User
Join Date: May 2001
Location: Wairarapa, New Zealand.
Posts: 782
|
Re: 41DegreesSouth Build Thread
Thanks for the comments guys.
I get dizzy looking at the truck!! The cab is basically a write off because it had a vinyl roof from new (read LOTS of rust) so I am doing the swap on this cab as a dry run, iron out any bugs in my plan, set up gear linkages etc. So when the 'new' cab turns up I'll be a little (really little) bit more organised..... maybe! Will then chop new cab with patterns refined on this one. So yes, the gear linkage will be cable, just sorting out the linkage part before the cable......Haven't sorted carb yet, but assume cable will work. N2TRUX, yeah I could legally leave it LHD, but I want a user friendly daily driver, and personally think RHD will be easier on my head!! A large truck on our narrow country roads will be enough of a handful. Negotiating narrow windy roads, while sitting on the 'wrong' side...... potentially a recipe for disaster. Believe me, this truck will more than stand out..... still very few full size trucks down here. Even less of this era, even less 3/4 ton 4X4's! New cab is bobbing it's way south as we speak..... fingers crossed it'll be here by Christmas. |
![]() |
![]() |
![]() |
#15 |
laying low
![]() Join Date: Mar 2001
Location: Searcy, Ark. USA
Posts: 13,219
|
Re: 41DegreesSouth Build Thread
Bill, it's simple. If you guys down there would just learn how to drive on the right side of the road you wouldn't be having to go through all this.
![]() Only kidding there pard. I commend you as I sure wouldn't want to tackle this swap. Keep the pics coming.
__________________
Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross |
![]() |
![]() |
![]() |
#16 |
Senior Member
Join Date: Dec 2004
Location: Southern Pines NC
Posts: 3,853
|
Re: 41DegreesSouth Build Thread
All hail the Queen
|
![]() |
![]() |
![]() |
#17 |
The LuvShack Garage
Join Date: Jan 2004
Location: Maple Grove, TN (West Side)
Posts: 30,477
|
Re: 41DegreesSouth Build Thread
Sweeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeet
![]()
__________________
Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T |
![]() |
![]() |
![]() |
#18 |
PROJECT 7DEUCE
![]() Join Date: Dec 2002
Location: GRANTS PASS OR
Posts: 21,608
|
Re: 41DegreesSouth Build Thread
Where would you get a steering box for that set-up ?
__________________
GO BIG GREEN ![]() MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P.. |
![]() |
![]() |
![]() |
#19 |
Registered User
Join Date: Jan 2005
Location: Australia
Posts: 215
|
Re: 41DegreesSouth Build Thread
Frenchblue, The steering boxes on our trucks are on the outside of the rail and on a car the box is on the inside so if you get a car one and move it over to the other side it goes to the outside on the truck, only catch is when you turn the drag link around it must be cut and lengthened because the sector shaft on the steering box is on the outer side of the box, Hope this makes sense.
Over here in Aus i have seen a zl Ford Fairlane steering box used, the sector shaft is on the corect side therefore you don't have to cut your drag link and the pitman arm fits straight on !!! |
![]() |
![]() |
![]() |
#20 |
Registered User
Join Date: May 2001
Location: Wairarapa, New Zealand.
Posts: 782
|
Re: 41DegreesSouth Build Thread
Ok, so I better show you's what I've been doing on my truck since November. The first shot is of what turned up here a couple of days before Christmas.....and yes, all my Christmas's did come at once! Thank you's to Mr Hepp, and all involved with the contents of my 'parcel'.
The next two photos are self explanatory. Went well after I had rebuilt the ram on the (borrowed) engine lifter ![]()
__________________
1972 K2500 Long Box 400/350 |
![]() |
![]() |
![]() |
#21 |
Registered User
Join Date: May 2001
Location: Wairarapa, New Zealand.
Posts: 782
|
Re: 41DegreesSouth Build Thread
And as of Friday it now looks like this. The PO was obviously an 'interesting' fellow!!! But he did underseal the chassis and now I have it mostly scraped off I have a very sound chassis so that is great. One question, I paid my $25 and you taught me how to remove ignition bezels, head light switchs, steering arms, etc etc and my truck now looks like this. So how much do I have to pay for you all to come down and put this thing back together!!!!! Man I've got bits of Chev (GMC) everywhere! And I still need to strip my transfer case down, and replace the axle seals in the front diff. I now appreciate how much work has gone into all those other pictures of your's that showed bare chassis's. Thanks for your help so far. I literally wouldn't have got this far without the information on this site, and from it's members!
I'll be back with all my crazy questions as this thing starts to go back together.
__________________
1972 K2500 Long Box 400/350 |
![]() |
![]() |
![]() |
#22 |
Designated A-hole!
Join Date: Mar 2003
Location: South Mississippi
Posts: 36,450
|
Re: 41DegreesSouth Build Thread
Stripped down!
![]()
__________________
"If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. ![]() We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck" |
![]() |
![]() |
![]() |
#24 |
The LuvShack Garage
Join Date: Jan 2004
Location: Maple Grove, TN (West Side)
Posts: 30,477
|
Re: 41DegreesSouth Build Thread
Great progress, keep us updated, you already figured out we Luv the pic's
![]()
__________________
Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T |
![]() |
![]() |
![]() |
#25 |
State of Confusion!
![]() ![]() Join Date: Jul 2002
Location: Gulfport, MS USA
Posts: 46,858
|
Re: 41DegreesSouth Build Thread
I want to see it go back together, which I am sure you do too
![]()
__________________
Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God! |
![]() |
![]() |
![]() |
Bookmarks |
|
|