engine upgrade time... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

wshattuck · 12-17-2016, 01:54 PM

well I wasn't planning on upgrading the motor just yet but I guess now is the time... I had a small oil leak so I took it to have it looked at and unfortunately he found some problems, the crank was scored, then found the bearings were shot, camshaft damaged too, also found when the previous owner had the motor worked on they put the main caps in the incorrect order and were loose(which probably caused most of the issues)... so to say the least there is a lot of things that will need to be done to fix the issues. if it was the original 396 block I would just have it rebuilt and fixed but since its not I'm not to worried about it...

so after some debating I'm upgrading the engine to a crate 502... the motor just came in and hoping to start installing it next week. some pics below... more to come. I cant wait till it gets installed...

weq92f · 12-17-2016, 02:32 PM

Can you give more details on your crate 502? There are quite a few out there so I'm curious which one you chose and why.

I'm in a similar situation: have 396/402 want more go. A swap like this would be ideal as it seems all the bolt ons will swap directly over from old to new.

I see a 502 long block on Summit for 6700 w/ 461hp, 558 tq. This the one?

Thanks,

-klb

wshattuck · 12-17-2016, 02:40 PM

below is a link to the one I got... its the ZZ502, I actually got it cheaper from the dealership than summit racing!

http://www.chevrolet.com/performance...02-deluxe.html

I did order a set of hedman mid length ceramic coated headers too... I got a electric fan setup coming from oldair products, some other misc items: tubular motor mounts, fuel pump, new stainless transmission lines, etc. I am going to try and go with my front engine accessories off my 396 motor. I may do the serpentine setup later on though...

I will have some more info next week on how its going!

1972RedNeck · 12-17-2016, 02:58 PM

Quote:

Originally Posted by wshattuck

below is a link to the one I got... its the ZZ502, I actually got it cheaper from the dealership than summit racing!

http://www.chevrolet.com/performance...02-deluxe.html

I did order a set of hedman mid length ceramic coated headers too...

I will have some more info next week on how its going!

That should chirp the tires a smidge...

TwoFiftyShifter · 12-17-2016, 03:20 PM

Quote:

Originally Posted by wshattuck

below is a link to the one I got... its the ZZ502, I actually got it cheaper from the dealership than summit racing!

http://www.chevrolet.com/performance...02-deluxe.html

I did order a set of hedman mid length ceramic coated headers too... I got a electric fan setup coming from oldair products, some other misc items: tubular motor mounts, fuel pump, new stainless transmission lines, etc. I am going to try and go with my front engine accessories off my 396 motor. I may do the serpentine setup later on though...

I will have some more info next week on how its going!

Which dealership did you pick it up from?

weq92f · 12-17-2016, 02:53 PM

Nice! It's going to be really sweet!

FWIW I have the 1000 dollar GM serpentine system with Radial A/C pump, long water pump, PS pump and Alt. It works but it's not very pleasing to the eye and is made of cast iron ( heavy ). Also, future A/C pump replacements are locked into the one type of pump, the ugly radial version, rather than the newer/smaller polished pumps.

-klb

wshattuck · 12-17-2016, 09:14 PM

Megel Chevy... the head tech(butch) is a car guy and they are installing the engine there... he also did all my disc brake conversion, suspension, etc... damn good mechanic!

will

Mollzyie · 12-18-2016, 09:14 PM

Very nice man ! Congrats

Let's see a pic of truck it's going in !

mild68 · 12-18-2016, 09:37 PM

An upgrade indeed. I had a ZZ502 in two different cars. A 3860 lb 68 Chevelle w 3.08 rear gears. Wasn't overly impressed with the performance.
Then put it in a 3780 Lb 69 Chevelle w 4.10 rear gears. Hell yeah, them gears woke it up. Ran 11.9 1/4 mile w 1.63 0-60ft times. Pulled wheelies w 10.5W slicks too.

wshattuck · 12-18-2016, 10:06 PM

it's a going in this....

Mollzyie · 12-19-2016, 01:33 AM

Very nice gonna be very nice !

jjzepplin · 12-19-2016, 04:51 AM

Quote:

Originally Posted by wshattuck

it's a going in this....

OOOOHHHH!!!! Mancard upgrade! Nice ride right there!

**Boog** · 12-19-2016, 05:40 AM

Oh yeah, load it up. Great looking CST. You know, I bet if you looked around some you could find some 502 emblems to replace those 396 ones on the fenders. You probably know of someone who could mill some for you, if you were inclined to change them that is.

srea76 · 12-19-2016, 08:53 AM

Awesome..Now you need someone in Georgia to take that 396 off your hands. I know a guy..... lol

fatbass · 12-19-2016, 12:46 PM

Were I you I'd put those 396 valve covers on that 502 and not let a soul know any different.

wshattuck · 12-19-2016, 03:21 PM

Boog, I'm already ahead of you... Jhow66 on this forum showed how to do it in a post!

well that's a cool idea if I was racing or something but for all that its gonna cost me to get it, I want them to know its a 502!!

**Boog** · 12-20-2016, 12:46 AM

There ya go bud. Say it loud. Wave that banner.

67ChevyRedneck · 12-20-2016, 09:27 AM

I was expecting "another LS" thread.... Very Nice!!! Great looking truck too!

James the III · 12-20-2016, 09:36 AM

Very nice..

wshattuck · 12-22-2016, 08:46 PM

**update**

headers, fuel pump, stainless trans lines, tubular frame mounts, and electric fans are here... motor hopefully going in tomorrow. more pics to follow.

El Dorado Jim · 12-23-2016, 03:32 PM

a 502, how awesome!!!!

wshattuck · 12-24-2016, 03:18 PM

update...

motor is in the truck! electric fans in too!! so close now!!!

el_fantasma · 12-24-2016, 03:41 PM

Looks amazing

davepl · 12-24-2016, 05:31 PM

Here's my ZZ502. I like to dress them stealthily... right down to the tower clamps. In fact, since this photo was taken, I went back to a snorkel air cleaner too!

A quick look at the front timing covers reveals that it's actually a Gen VI engine, but most people don't look that closely.

weq92f · 12-24-2016, 06:10 PM

That really looks nice. Which hedman headers did you get ( part number please if you can ). Any clearance issues?

Thanks,

-klb

12-17-2016, 01:54 PM	#1
wshattuck Registered User Join Date: Dec 2013 Location: Dawsonville, GA Posts: 164	engine upgrade time... well I wasn't planning on upgrading the motor just yet but I guess now is the time... I had a small oil leak so I took it to have it looked at and unfortunately he found some problems, the crank was scored, then found the bearings were shot, camshaft damaged too, also found when the previous owner had the motor worked on they put the main caps in the incorrect order and were loose(which probably caused most of the issues)... so to say the least there is a lot of things that will need to be done to fix the issues. if it was the original 396 block I would just have it rebuilt and fixed but since its not I'm not to worried about it... so after some debating I'm upgrading the engine to a crate 502... the motor just came in and hoping to start installing it next week. some pics below... more to come. I cant wait till it gets installed... Last edited by wshattuck; 12-17-2016 at 02:04 PM.

12-17-2016, 02:32 PM	#2
weq92f Registered User Join Date: Oct 2016 Location: Dallas Texas Posts: 3,151	Re: engine upgrade time... Can you give more details on your crate 502? There are quite a few out there so I'm curious which one you chose and why. I'm in a similar situation: have 396/402 want more go. A swap like this would be ideal as it seems all the bolt ons will swap directly over from old to new. I see a 502 long block on Summit for 6700 w/ 461hp, 558 tq. This the one? Thanks, -klb __________________ 67 C10 fleet fuel injected '70 402, 700r4, 3.73 posi 07 335 sport turbo 6sp 94 Trans Am GT LT1 6sp posi -- sold after 22yrs 99 540 sport V8 6sp -- sold 73 240z L24 4sp -- given to friend 68 C10 step 350/350 3.73 open -- sold

12-17-2016, 02:40 PM	#3
wshattuck Registered User Join Date: Dec 2013 Location: Dawsonville, GA Posts: 164	Re: engine upgrade time... below is a link to the one I got... its the ZZ502, I actually got it cheaper from the dealership than summit racing! http://www.chevrolet.com/performance...02-deluxe.html I did order a set of hedman mid length ceramic coated headers too... I got a electric fan setup coming from oldair products, some other misc items: tubular motor mounts, fuel pump, new stainless transmission lines, etc. I am going to try and go with my front engine accessories off my 396 motor. I may do the serpentine setup later on though... I will have some more info next week on how its going!

12-17-2016, 02:53 PM	#6
weq92f Registered User Join Date: Oct 2016 Location: Dallas Texas Posts: 3,151	Re: engine upgrade time... Nice! It's going to be really sweet! FWIW I have the 1000 dollar GM serpentine system with Radial A/C pump, long water pump, PS pump and Alt. It works but it's not very pleasing to the eye and is made of cast iron ( heavy ). Also, future A/C pump replacements are locked into the one type of pump, the ugly radial version, rather than the newer/smaller polished pumps. -klb __________________ 67 C10 fleet fuel injected '70 402, 700r4, 3.73 posi 07 335 sport turbo 6sp 94 Trans Am GT LT1 6sp posi -- sold after 22yrs 99 540 sport V8 6sp -- sold 73 240z L24 4sp -- given to friend 68 C10 step 350/350 3.73 open -- sold

12-17-2016, 09:14 PM	#7
wshattuck Registered User Join Date: Dec 2013 Location: Dawsonville, GA Posts: 164	Re: engine upgrade time... Megel Chevy... the head tech(butch) is a car guy and they are installing the engine there... he also did all my disc brake conversion, suspension, etc... damn good mechanic! will

12-18-2016, 09:14 PM	#8
Mollzyie Registered User Join Date: Aug 2016 Location: Miami fl Posts: 289	Re: engine upgrade time... Very nice man ! Congrats Let's see a pic of truck it's going in ! __________________ M.A.G.A.

12-18-2016, 09:37 PM	#9
mild68 Registered User Join Date: Dec 2015 Location: Normal, Il. Posts: 110	Re: engine upgrade time... An upgrade indeed. I had a ZZ502 in two different cars. A 3860 lb 68 Chevelle w 3.08 rear gears. Wasn't overly impressed with the performance. Then put it in a 3780 Lb 69 Chevelle w 4.10 rear gears. Hell yeah, them gears woke it up. Ran 11.9 1/4 mile w 1.63 0-60ft times. Pulled wheelies w 10.5W slicks too. __________________ my next project 68 step side 5.3 S10 build thread My 68 Chevelle SS396

12-18-2016, 10:06 PM	#10
wshattuck Registered User Join Date: Dec 2013 Location: Dawsonville, GA Posts: 164	Re: engine upgrade time... it's a going in this....

12-19-2016, 01:33 AM	#11
Mollzyie Registered User Join Date: Aug 2016 Location: Miami fl Posts: 289	Re: engine upgrade time... Very nice gonna be very nice ! __________________ M.A.G.A.

12-19-2016, 05:40 AM	#13
Boog laying low Join Date: Mar 2001 Location: Searcy, Ark. USA Posts: 13,433	Re: engine upgrade time... Oh yeah, load it up. Great looking CST. You know, I bet if you looked around some you could find some 502 emblems to replace those 396 ones on the fenders. You probably know of someone who could mill some for you, if you were inclined to change them that is. __________________ Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross

12-19-2016, 08:53 AM	#14
srea76 Registered User Join Date: Nov 2009 Location: Hazlehurst, Ga. Posts: 822	Re: engine upgrade time... Awesome..Now you need someone in Georgia to take that 396 off your hands. I know a guy..... lol __________________ 1972 Custom Deluxe LT1 Gen V Swap "Green Lantern" 1984 Silverado Red Baron-72 c10 Project

12-19-2016, 12:46 PM	#15
fatbass Registered User Join Date: May 2012 Location: South Ogden, Utah Posts: 172	Re: engine upgrade time... Were I you I'd put those 396 valve covers on that 502 and not let a soul know any different.

12-19-2016, 03:21 PM	#16
wshattuck Registered User Join Date: Dec 2013 Location: Dawsonville, GA Posts: 164	Re: engine upgrade time... Boog, I'm already ahead of you... Jhow66 on this forum showed how to do it in a post! well that's a cool idea if I was racing or something but for all that its gonna cost me to get it, I want them to know its a 502!!

12-20-2016, 12:46 AM	#17
Boog laying low Join Date: Mar 2001 Location: Searcy, Ark. USA Posts: 13,433	Re: engine upgrade time... There ya go bud. Say it loud. Wave that banner. __________________ Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross

12-20-2016, 09:27 AM	#18
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: engine upgrade time... I was expecting "another LS" thread.... Very Nice!!! Great looking truck too! __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!



Register or Log In To remove these advertisements.

12-20-2016, 09:36 AM	#19
James the III Registered User Join Date: Nov 2016 Location: lowell ma Posts: 750	Re: engine upgrade time... Very nice..

12-22-2016, 08:46 PM	#20
wshattuck Registered User Join Date: Dec 2013 Location: Dawsonville, GA Posts: 164	Re: engine upgrade time... update headers, fuel pump, stainless trans lines, tubular frame mounts, and electric fans are here... motor hopefully going in tomorrow. more pics to follow. __________________ 1969 C10, ZZ502, T400, A/C, WoodBed, Bucket Seats 1965 C10, 5.3LS, 4L60, Vintage Air, Woodbed

12-23-2016, 03:32 PM	#21
El Dorado Jim Registered User Join Date: Dec 2009 Location: El Dorado Ca Posts: 3,374	Re: engine upgrade time... a 502, how awesome!!!!

12-24-2016, 03:18 PM	#22
wshattuck Registered User Join Date: Dec 2013 Location: Dawsonville, GA Posts: 164	Re: engine upgrade time... update... motor is in the truck! electric fans in too!! so close now!!! __________________ 1969 C10, ZZ502, T400, A/C, WoodBed, Bucket Seats 1965 C10, 5.3LS, 4L60, Vintage Air, Woodbed

12-24-2016, 03:41 PM	#23
el_fantasma Registered User Join Date: Oct 2016 Location: Redwood City CA Posts: 566	Re: engine upgrade time... Looks amazing __________________ 72 White Cheyenne, The Ghost

12-24-2016, 05:31 PM	#24
davepl Registered User Join Date: Aug 2006 Location: Redmond, WA Posts: 6,332	Re: engine upgrade time... Here's my ZZ502. I like to dress them stealthily... right down to the tower clamps. In fact, since this photo was taken, I went back to a snorkel air cleaner too! A quick look at the front timing covers reveals that it's actually a Gen VI engine, but most people don't look that closely. Attached Images __________________ 1970 GMC Sierra Grande Custom Camper - Built, not Bought 1969 Pontiac 2+2 427/390 4-speed Coupe 1969 Pontiac 2+2 427/390 4-speed Convertible

12-24-2016, 06:10 PM	#25
weq92f Registered User Join Date: Oct 2016 Location: Dallas Texas Posts: 3,151	Re: engine upgrade time... That really looks nice. Which hedman headers did you get ( part number please if you can ). Any clearance issues? Thanks, -klb __________________ 67 C10 fleet fuel injected '70 402, 700r4, 3.73 posi 07 335 sport turbo 6sp 94 Trans Am GT LT1 6sp posi -- sold after 22yrs 99 540 sport V8 6sp -- sold 73 240z L24 4sp -- given to friend 68 C10 step 350/350 3.73 open -- sold

Register or Log In To remove these advertisements.