need distributor advce

[rmmurphy]

i have a 68 327/400trans stock with a holley 600.the po put an hei dist. in it. my truck started running rough so I started fishing around under the hood. cap and rotor were trashed, I pulled up on the rotor and the shaft moved up and down about 1/4 od an inch. Thr centrifical advance weights are almost ready to fall off. Anyway heres my question. stock hei or aftermarket dist???

thanks Rob

[Shyguy]

It kind of depends on how you drive your truck and how you want the engine to look.

I like GM style Hei myself. One reason is if anything happens on a trip parts are readily available.

[BMERDOC]

A stock H.E.I. is about $150. I don't think you'll need much more to get you going again. Make sure you buy a name you recognize and toss it in. If you wanna dial it in better once its running good again update this thread and we'll sort you out.

[Stocker]

I put a stock HEI in my '72 several years ago. No problems. That's what I'd recommend.

[rmmurphy]

thanks for the input guys. I went with the stock hei