![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Registered User
![]() Join Date: Sep 2001
Location: Ontario New Yak
Posts: 843
|
Dana 44 closed knucle preload
I doing the front end. New bearings and stuff on a Dana 44 8 bolt closed knuckle 68 1/2 ton. I'm at 4 ft lbs turning resistance with a torque wrench on the one of the trunnion bolts. Dana manual says 5-10 ft pounds...
I've done Dana closed knuckle Jeeps at 3 foot pounds and never had a death wobble or shimmy... What do you say? Thanks |
![]() |
![]() |
![]() |
Bookmarks |
|
|