Back at it again still loooking for C50 fenders - The 1947 - Present Chevrolet & GMC Truck Message Board Network

T.Matthews · 10-13-2005, 03:48 PM

Hello everyone,

I'm once again looking for fenders for a1970 C 50 Chevy. I need front left and right fenders. I took the summer off from looking now I'm back at it again.
Any help would be much appriceated.

Thank you,

Tom

stllookn · 10-13-2005, 09:35 PM

I saw two C50 trucks today that have your fenders but the fenders must go with the truck! Here's a bump for you, though.

classicchev · 10-13-2005, 09:45 PM

May be able to get a set for you. Let you know tomorrow

lazygaurd · 10-14-2005, 01:06 AM

I can get you a set as well but I will have to check them over for rust. I think this one was a 71 C-50 and was a town gravel truck.
brookbanks2@shaw.ca

T.Matthews · 10-14-2005, 12:53 PM

YEs please le tme know I've been looking for a while now.

Thanks,

Tom

**71blksuper4x4** · 10-14-2005, 01:47 PM

I know there is about 3 to 4 of them in our small junkyard in my hometown. they were pretty damn complete if I remember right. I will look the next time I am home. I know they have fenders on them. Need anything else off of one? Trevor

T.Matthews · 10-14-2005, 07:44 PM

Alll I need is the fenders, I 'm been looking all over New England and have called all over the country. I found a hood in mint condition at a junk yard near my house.

Thanks again

71swb4x4 · 10-14-2005, 07:56 PM

I think there is a set in a junkyard here. It will be a couple weekends before I can check it out, so if you haven't found any in a couple weeks PM me and I will go check.
Shawn

T.Matthews · 11-08-2005, 05:21 PM

Still looking.

masterbeavis · 11-08-2005, 09:12 PM

there is a yard near here with one. what are you lookin to give for a pair? I dunno if he wants to start parting the truck out, but I will ask him next time I can catch him

68gmcdually · 11-08-2005, 11:08 PM

You certainly have been looking for these for a long time haven't you!! It is too bad that mine are bent up. My cab is the only thing left and it is destined for the bone yard next week. I had a lead on a fender last year. I still have the number at work. I could give them a call tomorrow if you want.

T.Matthews · 11-09-2005, 10:07 AM

Absolutly..............yes I have been looking for a long time, my next option is cut and paste in new metal which could be a big pain.

68gmcdually · 11-10-2005, 11:57 PM

I have actually sourced a driver's side almost NOS front fender. That along with my cab, hood, most of a grille and a somewhat useable passenger fender can all be had for around the $300.00 mark picked up in beautiful Fenelon Falls, ON. Basically you are just paying for the fender. The cab was/is destined for the boneyard if nobody wants it.

68gmcdually · 11-12-2005, 10:17 PM

Well I just got back in from walking a HUGE vintage wrecking yard and only found a couple of C-50 fenders, none of which where in repairable condition. I did however find a couple of good GMC 950 emblems. The offer before still stands as well. I will give you the cab and the passenger fender, but the guy wants pretty good money for the driver's side fender, it must be pretty rare to find a new take off fender like that.

LUV2XCLR8 · 11-12-2005, 10:24 PM

I think there are 5 or 6 of those hee in the local yard, with complete
front clips, not sure on the condition, it's an hour away so I don't go
very much, but if you are still looking in Dec. let me know, off 3 and
1/2 weeks on vacation and I know I will be going back up there.

68gmcdually · 11-12-2005, 11:17 PM

I did find a good front clip today, unfortunately it was on a working GMC tandem axle grain truck. It was out in the field following the combine around.

71swb4x4 · 11-13-2005, 12:50 AM

Are you still looking? I can go check the local yard tomorrow. They had 1 big truck this summer.

Longhorn Man · 11-13-2005, 08:53 AM

can you post a pic of yours, considering there was more than one style.

T.Matthews · 11-13-2005, 09:43 PM

Yes I'm still looking and if you visit my website www.tmatthews.net yuo can see my dump truck

Please pardon the apperance on the site we are still touching it up.

Thanks everyone,

Tom

**southern parts** · 11-27-2005, 07:59 PM

I saw a pair of fenders while I was at the Moultrie swap meet. The right is a NOS, the left is used with a little bondo on the lower front but no rust. The guy who has them runs Kellys classic auto supply, he wants $200.00 for the pair. His name is Landry, phone # 229-549-8784 Hope this helps Woody

**68350** · 11-27-2005, 09:00 PM

You could call Pete's Truck and Salvage out of Williston, ND He has a lot of those style trucks parted(from what I have seen). If he had a set, let me know and I can check them out for ya. The phone number is 701-572-2373 Hope ya find some.

T.Matthews · 06-15-2006, 08:03 AM

Still looking...............need left and right front fenders..........anyone?

T.Matthews · 06-22-2006, 03:20 PM

Front fenders for a 1970 C 50 Chevy dump..........Anyone?

Robert1970C20rstbukt · 06-22-2006, 04:08 PM

I saw a '67 C60 here, but that's the only junker around our area. All others I've seen are still working on the farms. Your best bet would be to cut out the bad metal and MIG weld in new metal. Just my 2 cents.

1971custom · 06-22-2006, 07:30 PM

ive got a set here in colorado but ill bet shipping would be a killer

10-13-2005, 03:48 PM	#1
T.Matthews Registered User Join Date: Feb 2005 Location: Dunstable, MA Posts: 60	Back at it again still loooking for C50 fenders Hello everyone, I'm once again looking for fenders for a1970 C 50 Chevy. I need front left and right fenders. I took the summer off from looking now I'm back at it again. Any help would be much appriceated. Thank you, Tom

10-13-2005, 09:35 PM	#2
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	I saw two C50 trucks today that have your fenders but the fenders must go with the truck! Here's a bump for you, though. __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary)

10-13-2005, 09:45 PM	#3
classicchev Senior Member Join Date: Nov 2003 Location: Calgary Alberta Posts: 1,936	May be able to get a set for you. Let you know tomorrow __________________ 67- 72 Parts collecter

10-14-2005, 01:06 AM	#4
lazygaurd Senior Member Join Date: Oct 2002 Location: Saskatoon Saskatchewan Posts: 492	fenders I can get you a set as well but I will have to check them over for rust. I think this one was a 71 C-50 and was a town gravel truck. brookbanks2@shaw.ca

10-14-2005, 01:47 PM	#6
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,155	I know there is about 3 to 4 of them in our small junkyard in my hometown. they were pretty damn complete if I remember right. I will look the next time I am home. I know they have fenders on them. Need anything else off of one? Trevor __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

10-14-2005, 12:53 PM	#5
T.Matthews Registered User Join Date: Feb 2005 Location: Dunstable, MA Posts: 60	YEs please le tme know I've been looking for a while now. Thanks, Tom

10-14-2005, 07:44 PM	#7
T.Matthews Registered User Join Date: Feb 2005 Location: Dunstable, MA Posts: 60	Alll I need is the fenders, I 'm been looking all over New England and have called all over the country. I found a hood in mint condition at a junk yard near my house. Thanks again

10-14-2005, 07:56 PM	#8
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,497	I think there is a set in a junkyard here. It will be a couple weekends before I can check it out, so if you haven't found any in a couple weeks PM me and I will go check. Shawn __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.

11-08-2005, 05:21 PM	#9
T.Matthews Registered User Join Date: Feb 2005 Location: Dunstable, MA Posts: 60	Re: Back at it again still loooking for C50 fenders Still looking.

11-08-2005, 09:12 PM	#10
masterbeavis Having issues Join Date: Jul 2005 Location: Eldorado Ca, an hour east of sacramento Posts: 696	Re: Back at it again still loooking for C50 fenders there is a yard near here with one. what are you lookin to give for a pair? I dunno if he wants to start parting the truck out, but I will ask him next time I can catch him __________________ Quando Omni Flunkus Moritati. The Man's Prayer: "I'm a man, but I can change, if I have to, I guess."

11-08-2005, 11:08 PM	#11
68gmcdually Registered User Join Date: Feb 2004 Location: Fenelon Falls, ON Canada Posts: 1,455	Re: Back at it again still loooking for C50 fenders You certainly have been looking for these for a long time haven't you!! It is too bad that mine are bent up. My cab is the only thing left and it is destined for the bone yard next week. I had a lead on a fender last year. I still have the number at work. I could give them a call tomorrow if you want. __________________ James Bellwood 1968 930 Extend-A-Cab Dually 5.7l, 5 speed,

11-09-2005, 10:07 AM	#12
T.Matthews Registered User Join Date: Feb 2005 Location: Dunstable, MA Posts: 60	Re: Back at it again still loooking for C50 fenders Absolutly..............yes I have been looking for a long time, my next option is cut and paste in new metal which could be a big pain.

11-10-2005, 11:57 PM	#13
68gmcdually Registered User Join Date: Feb 2004 Location: Fenelon Falls, ON Canada Posts: 1,455	Re: Back at it again still loooking for C50 fenders I have actually sourced a driver's side almost NOS front fender. That along with my cab, hood, most of a grille and a somewhat useable passenger fender can all be had for around the $300.00 mark picked up in beautiful Fenelon Falls, ON. Basically you are just paying for the fender. The cab was/is destined for the boneyard if nobody wants it. __________________ James Bellwood 1968 930 Extend-A-Cab Dually 5.7l, 5 speed,

11-12-2005, 10:17 PM	#14
68gmcdually Registered User Join Date: Feb 2004 Location: Fenelon Falls, ON Canada Posts: 1,455	Re: Back at it again still loooking for C50 fenders Well I just got back in from walking a HUGE vintage wrecking yard and only found a couple of C-50 fenders, none of which where in repairable condition. I did however find a couple of good GMC 950 emblems. The offer before still stands as well. I will give you the cab and the passenger fender, but the guy wants pretty good money for the driver's side fender, it must be pretty rare to find a new take off fender like that. __________________ James Bellwood 1968 930 Extend-A-Cab Dually 5.7l, 5 speed,

11-12-2005, 10:24 PM	#15
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,482	Re: Back at it again still loooking for C50 fenders I think there are 5 or 6 of those hee in the local yard, with complete front clips, not sure on the condition, it's an hour away so I don't go very much, but if you are still looking in Dec. let me know, off 3 and 1/2 weeks on vacation and I know I will be going back up there. __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T



Register or Log In To remove these advertisements.

11-12-2005, 11:17 PM	#16
68gmcdually Registered User Join Date: Feb 2004 Location: Fenelon Falls, ON Canada Posts: 1,455	Re: Back at it again still loooking for C50 fenders I did find a good front clip today, unfortunately it was on a working GMC tandem axle grain truck. It was out in the field following the combine around. __________________ James Bellwood 1968 930 Extend-A-Cab Dually 5.7l, 5 speed,

11-13-2005, 12:50 AM	#17
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,497	Re: Back at it again still loooking for C50 fenders Are you still looking? I can go check the local yard tomorrow. They had 1 big truck this summer. __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.

11-13-2005, 08:53 AM	#18
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: Back at it again still loooking for C50 fenders can you post a pic of yours, considering there was more than one style.

11-13-2005, 09:43 PM	#19
T.Matthews Registered User Join Date: Feb 2005 Location: Dunstable, MA Posts: 60	Re: Back at it again still loooking for C50 fenders Yes I'm still looking and if you visit my website www.tmatthews.net yuo can see my dump truck Please pardon the apperance on the site we are still touching it up. Thanks everyone, Tom

11-27-2005, 07:59 PM	#20
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,470	Re: Back at it again still loooking for C50 fenders I saw a pair of fenders while I was at the Moultrie swap meet. The right is a NOS, the left is used with a little bondo on the lower front but no rust. The guy who has them runs Kellys classic auto supply, he wants $200.00 for the pair. His name is Landry, phone # 229-549-8784 Hope this helps Woody

11-27-2005, 09:00 PM	#21
68350 Senior Member Join Date: Jan 2002 Location: Williston, ND Posts: 2,999	Re: Back at it again still loooking for C50 fenders You could call Pete's Truck and Salvage out of Williston, ND He has a lot of those style trucks parted(from what I have seen). If he had a set, let me know and I can check them out for ya. The phone number is 701-572-2373 Hope ya find some. __________________ 68 Chevy CST/10, 50th Anniversary, 327/th400, 373 posi, buckets 68 GMC Shortbox Stepside, 402/th400, Tilt, Tach, Bucket Seats, 3.08 Positraction 69 Chevy Camaro SS, 383, 4 speed, positraction 70 Chevy El Camino SS396, Triple Black, 454/th400, Tach 70 Chevy Shortbox Stepside 4x4, 350/th350, Tilt, Tach, Cab Lights, Bumper Guards, Tow Hooks 70 Chevy 3/4 Longbox, 350/auto, 70k, SURVIVOR 71 Chevy Blazer, CST, 350/auto 71 GMC Sierra K2500, 454, 4 speed, 4.10 posi, 37s 71 Custom/30, Open Road, 350/th400, tilt 72 Chevy Shortbox Fleetside, 496 Stroker/th400, Tilt, Tach, Bucket Seats, 3.42 Posi 72 GMC Sierra Grande 2500. 427/th400, tilt, a/c, tool and stowage, buckets/console, 3.54 posi

06-15-2006, 08:03 AM	#22
T.Matthews Registered User Join Date: Feb 2005 Location: Dunstable, MA Posts: 60	Re: Back at it again still loooking for C50 fenders Still looking...............need left and right front fenders..........anyone?

06-22-2006, 03:20 PM	#23
T.Matthews Registered User Join Date: Feb 2005 Location: Dunstable, MA Posts: 60	Re: Back at it again still loooking for C50 fenders Front fenders for a 1970 C 50 Chevy dump..........Anyone?

06-22-2006, 04:08 PM	#24
Robert1970C20rstbukt Registered User Join Date: Jun 2004 Location: Beeville, Texas Posts: 1,943	Re: Back at it again still loooking for C50 fenders I saw a '67 C60 here, but that's the only junker around our area. All others I've seen are still working on the farms. Your best bet would be to cut out the bad metal and MIG weld in new metal. Just my 2 cents. __________________ RJD 1984 Chevrolet C30 welding truck 454/SM465 1977 GMC C15 pickup 350/TH350 1970 Chevrolet C20 pickup 350/TH400 1970 Chevrolet K20 Suburban 454/TH350 1969 GMC 8500 478M V6/5 spd winch truck

06-22-2006, 07:30 PM	#25
1971custom Registered User Join Date: Apr 2005 Location: south west nebraska Posts: 244	Re: Back at it again still loooking for C50 fenders ive got a set here in colorado but ill bet shipping would be a killer

Register or Log In To remove these advertisements.