TX Wanted: Bed Patch Panels! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1956cameo · 07-25-2011, 09:42 PM

I am needing a donor patch of the rear lower section of bed panel for my blazer project. On the drivers side I just need a patch from the body crease down and from the wheel well to about 6" behind the wheel well. This patch can come off of any type of bed panel (blazer, swb, lwb). On the passenger side I need the donor section from just above the body crease where the chrome moulding goes to the bottom of the bedside, and from the wheel well all the way to the end of the bedside. I would prefer that this section be from a blazer or short wheel base bedside, but if I had to I could make a donor piece from a long wheel base bed panel work.

Please let me know what you have. Below is a picture of the area I am needing the donor patches from. Thanks!

1956cameo · 07-26-2011, 08:16 PM

Bump!

1956cameo · 07-27-2011, 09:48 PM

1956cameo · 07-29-2011, 10:30 PM

Willing to pay top dollar for a quality panel!

1956cameo · 08-03-2011, 09:21 PM

I have some good leads on whole bedsides but would like to see if someone has just the patches before I have to cut good panels up! Let me know whats out there!!

*mrdana60* · 08-03-2011, 09:57 PM

bump for you. i seen your pic under name and said to myself.......stay thirsty my friends

ka_jd7and1 · 08-08-2011, 09:39 PM

I have a set of longbed bedsides I will be cutting up on Friday if I can't find a buyer for complete pieces.

Do you want me to send pics of what I've got?

1956cameo · 08-11-2011, 06:52 PM

Definately!

ka_jd7and1 · 08-11-2011, 07:20 PM

Hey, I wasn't able to get pics tonight, but I'm off work tomorrow so I can grab some.

ka_jd7and1 · 08-16-2011, 10:49 PM

Sorry it's taken so long to get pics...

The bedsides are solid, truck looked like it was in original paint. Surface rust only, no rot. They may take a little work ,but nothing major, IMO.

Driver's side looks like it got backed into by something in the taillight area, not too bad though:

1956cameo · 08-28-2011, 05:25 PM

Sorry for the late reply. My wife and I are moving so I have been off the forum for a while. The bedsides look useable for what I am wanting to do. Are there any pits on the backside of the panels (mainly on the bottom 10 inches)?

ka_jd7and1 · 08-28-2011, 09:39 PM

Sorry, I sold 'em locally after I hadn't heard from you.

402GMC · 08-28-2011, 10:10 PM

If you have extra front fenders, I have used the portion behind the front wheel to patch behind the rear wheel. Just a thought!

1956cameo · 09-02-2011, 06:00 PM

ka_jd7and1, No problem. Life got busy for me and I wasn't able to get on the board for a couple of weeks.

402GMC, Thanks for the tip. I might be able to do that on the drivers side if I cant find a patch from a bedside.

1956cameo · 09-13-2011, 06:10 PM

Still looking for these patches!

07-25-2011, 09:42 PM	#1
1956cameo Registered User Join Date: Apr 2008 Location: Angleton, TX Posts: 2,219	Wanted: Bed Patch Panels! I am needing a donor patch of the rear lower section of bed panel for my blazer project. On the drivers side I just need a patch from the body crease down and from the wheel well to about 6" behind the wheel well. This patch can come off of any type of bed panel (blazer, swb, lwb). On the passenger side I need the donor section from just above the body crease where the chrome moulding goes to the bottom of the bedside, and from the wheel well all the way to the end of the bedside. I would prefer that this section be from a blazer or short wheel base bedside, but if I had to I could make a donor piece from a long wheel base bed panel work. Please let me know what you have. Below is a picture of the area I am needing the donor patches from. Thanks! __________________ I don't always drive trucks; but when I do I prefer Chevy's. Stay driving my friends. '72 blazer 2wd build 67-72 Factory Big Block Registry

07-26-2011, 08:16 PM	#2
1956cameo Registered User Join Date: Apr 2008 Location: Angleton, TX Posts: 2,219	Re: Wanted: Bed Patch Panels! Bump! __________________ I don't always drive trucks; but when I do I prefer Chevy's. Stay driving my friends. '72 blazer 2wd build 67-72 Factory Big Block Registry

07-27-2011, 09:48 PM	#3
1956cameo Registered User Join Date: Apr 2008 Location: Angleton, TX Posts: 2,219	Re: Wanted: Bed Patch Panels! __________________ I don't always drive trucks; but when I do I prefer Chevy's. Stay driving my friends. '72 blazer 2wd build 67-72 Factory Big Block Registry

07-29-2011, 10:30 PM	#4
1956cameo Registered User Join Date: Apr 2008 Location: Angleton, TX Posts: 2,219	Re: Wanted: Bed Patch Panels! Willing to pay top dollar for a quality panel! __________________ I don't always drive trucks; but when I do I prefer Chevy's. Stay driving my friends. '72 blazer 2wd build 67-72 Factory Big Block Registry

08-03-2011, 09:21 PM	#5
1956cameo Registered User Join Date: Apr 2008 Location: Angleton, TX Posts: 2,219	Re: Wanted: Bed Patch Panels! I have some good leads on whole bedsides but would like to see if someone has just the patches before I have to cut good panels up! Let me know whats out there!! __________________ I don't always drive trucks; but when I do I prefer Chevy's. Stay driving my friends. '72 blazer 2wd build 67-72 Factory Big Block Registry

08-03-2011, 09:57 PM	#6
mrdana60 Account Suspended Join Date: Sep 2010 Location: centre al Posts: 2,472	Re: Wanted: Bed Patch Panels! bump for you. i seen your pic under name and said to myself.......stay thirsty my friends

08-08-2011, 09:39 PM	#7
ka_jd7and1 is a fungineer Join Date: Jan 2009 Location: Bakersfield, CA Posts: 795	Re: Wanted: Bed Patch Panels! I have a set of longbed bedsides I will be cutting up on Friday if I can't find a buyer for complete pieces. Do you want me to send pics of what I've got? __________________ 2003 S10, 2.2 auto- the daily driver, currently with a 2"/2" drop and some minor engine bolt-ons 1978 Impala 2-door, race 350/T350 - the new race car, in progress 1968 Chevy C10 longbed- 3/5 drop, currently undergoing a heart transplant

08-11-2011, 06:52 PM	#8
1956cameo Registered User Join Date: Apr 2008 Location: Angleton, TX Posts: 2,219	Re: Wanted: Bed Patch Panels! Definately! __________________ I don't always drive trucks; but when I do I prefer Chevy's. Stay driving my friends. '72 blazer 2wd build 67-72 Factory Big Block Registry

08-11-2011, 07:20 PM	#9
ka_jd7and1 is a fungineer Join Date: Jan 2009 Location: Bakersfield, CA Posts: 795	Re: Wanted: Bed Patch Panels! Hey, I wasn't able to get pics tonight, but I'm off work tomorrow so I can grab some. __________________ 2003 S10, 2.2 auto- the daily driver, currently with a 2"/2" drop and some minor engine bolt-ons 1978 Impala 2-door, race 350/T350 - the new race car, in progress 1968 Chevy C10 longbed- 3/5 drop, currently undergoing a heart transplant Last edited by ka_jd7and1; 08-11-2011 at 10:51 PM.

08-16-2011, 10:49 PM	#10
ka_jd7and1 is a fungineer Join Date: Jan 2009 Location: Bakersfield, CA Posts: 795	Re: Wanted: Bed Patch Panels! Sorry it's taken so long to get pics... The bedsides are solid, truck looked like it was in original paint. Surface rust only, no rot. They may take a little work ,but nothing major, IMO. Driver's side looks like it got backed into by something in the taillight area, not too bad though: __________________ 2003 S10, 2.2 auto- the daily driver, currently with a 2"/2" drop and some minor engine bolt-ons 1978 Impala 2-door, race 350/T350 - the new race car, in progress 1968 Chevy C10 longbed- 3/5 drop, currently undergoing a heart transplant

08-28-2011, 05:25 PM	#11
1956cameo Registered User Join Date: Apr 2008 Location: Angleton, TX Posts: 2,219	Re: Wanted: Bed Patch Panels! Sorry for the late reply. My wife and I are moving so I have been off the forum for a while. The bedsides look useable for what I am wanting to do. Are there any pits on the backside of the panels (mainly on the bottom 10 inches)? __________________ I don't always drive trucks; but when I do I prefer Chevy's. Stay driving my friends. '72 blazer 2wd build 67-72 Factory Big Block Registry

08-28-2011, 09:39 PM	#12
ka_jd7and1 is a fungineer Join Date: Jan 2009 Location: Bakersfield, CA Posts: 795	Re: Wanted: Bed Patch Panels! Sorry, I sold 'em locally after I hadn't heard from you. __________________ 2003 S10, 2.2 auto- the daily driver, currently with a 2"/2" drop and some minor engine bolt-ons 1978 Impala 2-door, race 350/T350 - the new race car, in progress 1968 Chevy C10 longbed- 3/5 drop, currently undergoing a heart transplant

08-28-2011, 10:10 PM	#13
402GMC Registered User Join Date: May 2008 Location: RAPID CITY, SOUTH DAKOTA Posts: 408	Re: Wanted: Bed Patch Panels! If you have extra front fenders, I have used the portion behind the front wheel to patch behind the rear wheel. Just a thought!

09-02-2011, 06:00 PM	#14
1956cameo Registered User Join Date: Apr 2008 Location: Angleton, TX Posts: 2,219	Re: Wanted: Bed Patch Panels! ka_jd7and1, No problem. Life got busy for me and I wasn't able to get on the board for a couple of weeks. 402GMC, Thanks for the tip. I might be able to do that on the drivers side if I cant find a patch from a bedside. __________________ I don't always drive trucks; but when I do I prefer Chevy's. Stay driving my friends. '72 blazer 2wd build 67-72 Factory Big Block Registry

09-13-2011, 06:10 PM	#15
1956cameo Registered User Join Date: Apr 2008 Location: Angleton, TX Posts: 2,219	Re: Wanted: Bed Patch Panels! Still looking for these patches! __________________ I don't always drive trucks; but when I do I prefer Chevy's. Stay driving my friends. '72 blazer 2wd build 67-72 Factory Big Block Registry



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.