|
02-11-2014, 01:33 PM | #1 |
Registered User
Join Date: Jul 2013
Location: Arizona
Posts: 174
|
Doors Hitting Fender
The doors are hitting the front fenders ever so slightly and I havnt been able to find the procedure for setting up the clearances for the door to fender gaps. Anyone kindly point me in the right direction?
Closed: Opening and colliding: Guessing I'll be turning this and a few other bolts, alignment to cab pillar looks off: TIA!
__________________
'82 C-10 SWB / C'd, Z'd, Body'd and Bagged / Shaved firewall, wiper cowl, drip rails, stake holes and tailgate/ 20" & 22" Milanni Voodoo '81 C-10 SWB Parts Truck IRC - http://webchat.snoonet.org/#baggedtrucks |
02-11-2014, 02:10 PM | #2 |
Slots go on anything!
Join Date: May 2003
Location: Richardson, TX
Posts: 5,957
|
Re: Doors Hitting Fender
Your fender just needs to come forward. Loosen that bolt in the jamb, one at the bottom (on the backside of the fender), one at the top of the cowl, an it should move. I would loosen the two that hold the back of the inner fender to the cab as well (the 9/16" bolt heads inside the wheel well, pointing to the cab)
__________________
1974 Jimmy- 5.3/4L80e/NP241 |
03-30-2014, 06:01 PM | #3 |
Registered User
Join Date: Jul 2013
Location: Arizona
Posts: 174
|
Re: Doors Hitting Fender
Thanks Jonboy, worked like a champ.
__________________
'82 C-10 SWB / C'd, Z'd, Body'd and Bagged / Shaved firewall, wiper cowl, drip rails, stake holes and tailgate/ 20" & 22" Milanni Voodoo '81 C-10 SWB Parts Truck IRC - http://webchat.snoonet.org/#baggedtrucks |
Bookmarks |
|
|