90's Silvardo split 60.40 installed in a '67 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

67ChevyRedneck · 11-14-2005, 10:14 AM

I had time to fit my "new" seats into my truck this weekend. I got them from palf70step and bigorange provided a driverside seat track for me. The install was super easy, except the middle mount was tricky. I had to bend the back part out just a hair so the seat sat level and because there are funky ribs in the middle of the floor where the mount is, I had to grind it a little bit for clearance. The front of the mount is going to require some sort of spacer about 2" long. Haven't figured out what to use there yet. I know y'all love pics, so here goes. That's my little helper in the 3rd pic.

67ChevyRedneck · 11-14-2005, 10:16 AM

The seats were a little nasty so my uncle offered to pressure wash them for me. They came so clean I was in shock. Except for a little bit of fading and a little wear, they look almost brand new. I love em. With the lokar shifter and the new seats, the truck is comfy as anything.

jsbgump · 11-14-2005, 10:55 AM

Looks good. I just got a set from another member and I need all of the track and mounting brackets for mine

**Palf70Step** · 11-14-2005, 02:37 PM

They look good. Glad it worked out for you. I used a long grade 8 bolt and a piece of steel pipe (1" I believe was the diameter) cut to length for that front center bracket. Originally I just had a stack of thick washers before the pipe.

Those seats are kinda like us....a good pressure wash and we clean up good enough to run the town.

Joe67 · 11-14-2005, 02:46 PM

Looks good. Just get them recovered

PICKMUP · 11-14-2005, 11:29 PM

Those are really comfortable seats and a good fit for our trucks. I have the buckets in my Blazer and 60-40 in my flatbed. I like the fit and firm feel much better than the '95 and newer seats...and I have tried them too.
I think I have a pic of a set covered in leather!!! Nope...it's gone, but here a pic of a new takeout set I found/and sold this year.
I want a set like this in red/burgandy.

Chris H · 11-15-2005, 09:48 AM

Quote:

Originally Posted by PICKMUP

Those are really comfortable seats and a good fit for our trucks. I have the buckets in my Blazer and 60-40 in my flatbed. I like the fit and firm feel much better than the 88 and newer seats...and I have tried them too.
I think I have a pic of a set covered in leather!!! Nope...it's gone, but here a pic of a new takeout set I found/and sold this year.
I want a set like this in red/burgandy.

Frank, see this post: http://67-72chevytrucks.com/vboard/s...d.php?t=178060

PICKMUP · 11-15-2005, 09:51 PM

Thanks Chris, but this board won't even let me look at the For Sale Board without paying the "Vendor's Fees" ($25 ea month or $280 @ year). That's a little high for me at this time running a one-man operation with no web page or catalog to refer/link to.

11-14-2005, 10:14 AM	#1
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	90's Silvardo split 60.40 installed in a '67 I had time to fit my "new" seats into my truck this weekend. I got them from palf70step and bigorange provided a driverside seat track for me. The install was super easy, except the middle mount was tricky. I had to bend the back part out just a hair so the seat sat level and because there are funky ribs in the middle of the floor where the mount is, I had to grind it a little bit for clearance. The front of the mount is going to require some sort of spacer about 2" long. Haven't figured out what to use there yet. I know y'all love pics, so here goes. That's my little helper in the 3rd pic. Attached Images __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

11-14-2005, 10:16 AM	#2
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: 90's Silvardo split 60.40 installed in a '67 The seats were a little nasty so my uncle offered to pressure wash them for me. They came so clean I was in shock. Except for a little bit of fading and a little wear, they look almost brand new. I love em. With the lokar shifter and the new seats, the truck is comfy as anything. Attached Images __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

11-14-2005, 10:55 AM	#3
jsbgump Gone Fishing Join Date: Aug 2005 Location: Fort Worth, Texas 76135 Posts: 12,361	Re: 90's Silvardo split 60.40 installed in a '67 Looks good. I just got a set from another member and I need all of the track and mounting brackets for mine __________________ 68 Chevy Short Fleetside LSX Swap Under Way 3.73 posi 2.5/4 drop Frame of resto has been started 2022 Hyundai Tucson Limited 2019 Chevy Traverse Redline Edition Wifes Ride Build Thread http://67-72chevytrucks.com/vboard/s...=1#post3483616

11-14-2005, 02:37 PM	#4
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,083	Re: 90's Silvardo split 60.40 installed in a '67 They look good. Glad it worked out for you. I used a long grade 8 bolt and a piece of steel pipe (1" I believe was the diameter) cut to length for that front center bracket. Originally I just had a stack of thick washers before the pipe. Those seats are kinda like us....a good pressure wash and we clean up good enough to run the town. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God! Last edited by Palf70Step; 11-14-2005 at 02:37 PM.

11-14-2005, 02:46 PM	#5
Joe67 67 is sold Join Date: Apr 2001 Location: Troy, Michigan Posts: 6,738	Re: 90's Silvardo split 60.40 installed in a '67 Looks good. Just get them recovered __________________ Joe - Formerly 67c10step ------------------------------- 1967 Chevy Stepside - ECE 4/6, fuelcell, 5lug - SOLD gr8lakes - My ebay auctions Click here to order forum apparel :: Click here to become a subscribing member

11-14-2005, 11:29 PM	#6
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,144	Re: 90's Silvardo split 60.40 installed in a '67 Those are really comfortable seats and a good fit for our trucks. I have the buckets in my Blazer and 60-40 in my flatbed. I like the fit and firm feel much better than the '95 and newer seats...and I have tried them too. I think I have a pic of a set covered in leather!!! Nope...it's gone, but here a pic of a new takeout set I found/and sold this year. I want a set like this in red/burgandy. Attached Images Last edited by PICKMUP; 11-16-2005 at 10:22 PM.

11-15-2005, 09:51 PM	#8
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,144	Re: 90's Silvardo split 60.40 installed in a '67 Thanks Chris, but this board won't even let me look at the For Sale Board without paying the "Vendor's Fees" ($25 ea month or $280 @ year). That's a little high for me at this time running a one-man operation with no web page or catalog to refer/link to.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.