![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Senior Member
Join Date: Aug 2005
Location: OKC, OK
Posts: 2,365
|
3 on the tree linkage, is the the same?
for '84 as a '69? I have a friend that needs the shift linkages for his '84. I have them in the '69 I just picked up, but i don't know if they will work. Anybody out there know?
Mike
__________________
Mike Redpath |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 21,980
|
Re: 3 on the tree linkage, is the the same?
The linkage rods are different lengths depending on which tramsmission was installed (not all 3spds were the same overall length). I had to swap different rods onto my 68's 3spd column when I swapped to a 3spd from a 69 model truck.
Once the linkage rods were swapped, it worked like intended.
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. Last edited by SCOTI; 12-26-2006 at 12:43 PM. |
![]() |
![]() |
![]() |
Bookmarks |
|
|