WTB Eaton 4.10 center section - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Chris H · 07-13-2004, 11:12 AM

I need a 4.10 center section for an Eaton HO72.
Locker would be fine but not necessary.

I will purchase outright, or trade for 4.57 or 5.14 centers that I have.

Shipping weight is 125 pounds on one of these, so shipping might be prohibitive. Would love to find one within 250 miles of Rochester, MN.

Let me know what you have, and how much!
Thanks,
chris

**JIMs70GMC** · 07-13-2004, 11:45 AM

do either of yours have the locker?

Chris H · 07-13-2004, 11:51 AM

Sorry, I should have mentioned that the ones I have are open (no lockers).

Rod · 07-13-2004, 10:21 PM

I'm a little far but have a couple of 4.10 sets. You might get lucky and find one closer.

07-13-2004, 11:12 AM	#1
Chris H 72 C30 Trailer Queen Join Date: Dec 1999 Location: SE MN, USA Posts: 794	WTB Eaton 4.10 center section I need a 4.10 center section for an Eaton HO72. Locker would be fine but not necessary. I will purchase outright, or trade for 4.57 or 5.14 centers that I have. Shipping weight is 125 pounds on one of these, so shipping might be prohibitive. Would love to find one within 250 miles of Rochester, MN. Let me know what you have, and how much! Thanks, chris

07-13-2004, 11:45 AM	#2
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	do either of yours have the locker? __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

07-13-2004, 10:21 PM	#4
Rod Join Date: Dec 1999 Location: Eastern - Manitoba Canada, Winnipeg Posts: 4,369	I'm a little far but have a couple of 4.10 sets. You might get lucky and find one closer. __________________ Senior active founding member. 70 3/4 ton GMC Suburban 4x4 250/4 spd. 71 1/2 ton Suburban Chevy 4x4, 350/350 72 Chev 1 ton tow truck 402BB w/Holmes 440 wrecker on propane 2005 FLSTSCI Harley Springer 85 FXSB Harley Lowrider 72 Triumph 650 Bonneville 5spd "Poor people don't have hobbies" Quote from wife.

07-13-2004, 11:51 AM	#3
Chris H 72 C30 Trailer Queen Join Date: Dec 1999 Location: SE MN, USA Posts: 794	Sorry, I should have mentioned that the ones I have are open (no lockers).



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.