starter wiring and altinator braket questions - The 1947 - Present Chevrolet & GMC Truck Message Board Network

my67C10 · 10-30-2006, 02:33 PM

Hi my name is Casey and im new to this web site. I have a 1967 Chevy C10, It has the 327 with the three on the tree. i got the truck about a week ago and the engine and trany was out of the truck and all wires that connect to the starter where disconnected. how do i tell which wires go to the starter, and which ones go where. My second question is how is altinator braket mounted. if at all possable i would like to get a picture.

davidh · 10-30-2006, 03:16 PM

Originally the alternator was on the drivers side. A lot of people put the 73up brackets which locates them to the passenger side. As far as the starter wires I'd have to see to tell you. I don't have a picture I can acess for you right now either..

my67C10 · 10-30-2006, 03:18 PM

ill try to find a digigal cam and take a few pics. thanks for your help.

Longhorn Man · 10-30-2006, 03:39 PM

the purple wire goes on the S terminal, the yellow wire goes on the R terminal, and the big ass red cable... well, it goes on the giant stud.

1st pic shows how it goes on the engine... but it's on the hood. The hole on the lower left of the arm uses the same bolt as the left side on the cradle.
2nd pic shows the 2 holes you'll be useing on the heads.
3rd shows where the cradle goes.

davidh · 10-31-2006, 03:41 PM

Quote:

Originally Posted by Longhorn Man

the purple wire goes on the S terminal, the yellow wire goes on the R terminal, and the big ass red cable... well, it goes on the giant stud.

1st pic shows how it goes on the engine... but it's on the hood. The hole on the lower left of the arm uses the same bolt as the left side on the cradle.
2nd pic shows the 2 holes you'll be useing on the heads.
3rd shows where the cradle goes.

BUT 67 V8S DIDN'T HAVE ACCESSORY HOLES IN THE HEADS YET. I THINK THE BRACKETS FOR 67-68 ARE A LITTLE DIFFERENT. THAT LOOKS TO BE THE 71-72BRACKET. SOMEONE CORRECT ME IF I'M WRONG..

krue · 10-30-2006, 06:52 PM

Looks like andy has you covered, so I'll say Welcome to the board.

neonlarry · 10-30-2006, 09:02 PM

You have a good resourse close at hand for electrical help. Mark @ MAD electric is just up the road in Spingville.
http://www.madelectrical.com/index.shtml

Longhorn Man · 10-31-2006, 04:10 PM

You are absolutly right... I missed that fact.
And again, that came off a 71 C/20 Longhorn with a 307.
Anyone have photos of the 67/68 brackets?

my67C10 · 11-02-2006, 10:12 PM

i had to use the top right bolt on the water pump for one of the holes and the two holes at the end of the exhaust mantifold on the driver side. all i need to do is get some new bolts for the fan, get the fan in, and get the radiator in and see how she purs. after all that frustrating crap is over, i still need to take the engine back out clean it up for paint and paint the engine bay, if the engine does need to be rebuilt than it gives me a reason to swap the crank out with a stroker crank, and possable port the heads.

10-30-2006, 02:33 PM	#1
my67C10 Registered User Join Date: Oct 2006 Location: Porterville, CA Posts: 146	starter wiring and altinator braket questions Hi my name is Casey and im new to this web site. I have a 1967 Chevy C10, It has the 327 with the three on the tree. i got the truck about a week ago and the engine and trany was out of the truck and all wires that connect to the starter where disconnected. how do i tell which wires go to the starter, and which ones go where. My second question is how is altinator braket mounted. if at all possable i would like to get a picture.

10-30-2006, 03:16 PM	#2
davidh Senior Member Join Date: Feb 2004 Location: Ponca city now kingfisher Oklahoma Posts: 1,221	Re: starter wiring and altinator braket questions Originally the alternator was on the drivers side. A lot of people put the 73up brackets which locates them to the passenger side. As far as the starter wires I'd have to see to tell you. I don't have a picture I can acess for you right now either..

10-30-2006, 03:18 PM	#3
my67C10 Registered User Join Date: Oct 2006 Location: Porterville, CA Posts: 146	Re: starter wiring and altinator braket questions ill try to find a digigal cam and take a few pics. thanks for your help.

10-30-2006, 03:39 PM	#4
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: starter wiring and altinator braket questions the purple wire goes on the S terminal, the yellow wire goes on the R terminal, and the big ass red cable... well, it goes on the giant stud. 1st pic shows how it goes on the engine... but it's on the hood. The hole on the lower left of the arm uses the same bolt as the left side on the cradle. 2nd pic shows the 2 holes you'll be useing on the heads. 3rd shows where the cradle goes. Attached Images Last edited by Longhorn Man; 10-30-2006 at 03:47 PM.

10-30-2006, 06:52 PM	#6
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,450	Re: starter wiring and altinator braket questions Looks like andy has you covered, so I'll say Welcome to the board. __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

10-30-2006, 09:02 PM	#7
neonlarry Registered User Join Date: Feb 2002 Location: Vacaville, CA Posts: 2,746	Re: starter wiring and altinator braket questions You have a good resourse close at hand for electrical help. Mark @ MAD electric is just up the road in Spingville. http://www.madelectrical.com/index.shtml __________________ 70 C/10 Light Red 350/TH350, HEI, Duals w/40 series Flows, 91 seat, LED taillights 99 Pontiac S/C GTP, SLP Ram Air hood, GMPP Konis & springs 95 Neon ACR, MP PCM, AFX UDP, 3.0 CAI

10-31-2006, 04:10 PM	#8
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: starter wiring and altinator braket questions You are absolutly right... I missed that fact. And again, that came off a 71 C/20 Longhorn with a 307. Anyone have photos of the 67/68 brackets?

11-02-2006, 10:12 PM	#9
my67C10 Registered User Join Date: Oct 2006 Location: Porterville, CA Posts: 146	Re: starter wiring and altinator braket questions i had to use the top right bolt on the water pump for one of the holes and the two holes at the end of the exhaust mantifold on the driver side. all i need to do is get some new bolts for the fan, get the fan in, and get the radiator in and see how she purs. after all that frustrating crap is over, i still need to take the engine back out clean it up for paint and paint the engine bay, if the engine does need to be rebuilt than it gives me a reason to swap the crank out with a stroker crank, and possable port the heads.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.