stock gurus' question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Lou Boffa · 03-21-2015, 02:31 PM

Is the body side moulding on this stock?
http://sanantonio.craigslist.org/cto/4903541330.html

**jocko** · 03-21-2015, 02:34 PM

Yep

shawno72 · 03-21-2015, 02:45 PM

Yes but odd to see without th lower trim in place as well

Lou Boffa · 03-21-2015, 03:26 PM

Quote:

Originally Posted by shawno72

Yes but odd to see without th lower trim in place as well

Thats what I was concerned about. If ordered w just the upper trim, would that appear on the SPID. And if so, how would it be stated?

ray_mcavoy · 03-21-2015, 04:12 PM

Quote:

Originally Posted by Lou Boffa

If ordered w just the upper trim, would that appear on the SPID. And if so, how would it be stated?

My 72 has just the upper body side molding like that. It's listed on the SPID as "B85 BELT MOLDING".

RPO B85 is described in the info kit from the GM Heritage Center as follows:

Quote:

Upper fender, door, cab panel, and pickup box moldings plus bright taillight trim. Not available when body side paint stripes are ordered. Included when Cheyenne Super is ordered.

SS Tim · 03-21-2015, 04:29 PM

Quote:

Originally Posted by Lou Boffa

Thats what I was concerned about. If ordered w just the upper trim, would that appear on the SPID. And if so, how would it be stated?

The B85 Belt Molding was a stand alone option and included only with Cheyenne Super trim. It was a required option on trucks painted in the Deluxe Two-Tone Scheme (plus the lowers). Promo Package Highlanders (YG6-8) were also optioned as part of the bundle with the upper molding only. Not to everyone's taste it is a different look.

This truck appears to be Custom/10 (base trim) and as such it would be listed on the SPID if original to the truck. However the tailgate should also have the upper and lower moldings.

http://67-72chevytrucks.com/vboard/s...d.php?t=572206

Lou Boffa · 03-21-2015, 04:55 PM

Thanks guys. You guys are tops. May go check it out. Sure need a fleetside to go with my stepper...

**special-K** · 03-21-2015, 03:21 PM

Could be, but could have been added, too. I see the mirrors were replaced and don't see holes from originals. Upper only could be ordered, though

**Razorbacker** · 03-21-2015, 08:34 PM

Here's another example of B85 upper belt molding only on my Longhorn.

03-21-2015, 02:31 PM	#1
Lou Boffa Registered User Join Date: Jan 2013 Location: San Antonio, TX Posts: 733	stock gurus' question Is the body side moulding on this stock? http://sanantonio.craigslist.org/cto/4903541330.html __________________ Figure out what you want--then figure out what you are willing to give up to get it.

03-21-2015, 02:34 PM	#2
jocko Senior Member Join Date: Oct 2009 Location: Godley, TX Posts: 17,976	Re: stock gurus' question Yep

03-21-2015, 02:45 PM	#3
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: stock gurus' question Yes but odd to see without th lower trim in place as well __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

03-21-2015, 04:55 PM	#7
Lou Boffa Registered User Join Date: Jan 2013 Location: San Antonio, TX Posts: 733	Re: stock gurus' question Thanks guys. You guys are tops. May go check it out. Sure need a fleetside to go with my stepper... __________________ Figure out what you want--then figure out what you are willing to give up to get it.

03-21-2015, 03:21 PM	#8
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: stock gurus' question Could be, but could have been added, too. I see the mirrors were replaced and don't see holes from originals. Upper only could be ordered, though __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

03-21-2015, 08:34 PM	#9
Razorbacker Senior Member Join Date: Aug 2011 Location: Benton, AR. Posts: 239	Re: stock gurus' question Here's another example of B85 upper belt molding only on my Longhorn. Attached Images __________________ Tony 1972 Chevy K10 SWB Custom Deluxe 350\|350\|NP205 2018 GMC Sierra Z/71 Crew 2008 GMC Yukon 2007 Chevy 1500 LT 1967 Pontiac Firebird 400



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.