![]() |
|
![]() |
#1 |
Registered User
Join Date: Jul 2012
Location: Ft Wayne Indiana
Posts: 1,204
|
Gas Tank Confusion
Well, it seems I've got an EEC tank, but without the EEC.
![]() Does this look like a replaced tank? That's what I'm thinking because it's pretty clean, no rust. Here are some pics: ![]() ![]() ![]() ![]() There's also no charcoal canister, and no evidence that there was one. Also, it's got a vented cap off of a....Ford ![]() Thanks!
__________________
71 K20 64 GMC mud truck |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Jul 2012
Location: Ft Wayne Indiana
Posts: 1,204
|
Re: Gas Tank Confusion
Bump
__________________
71 K20 64 GMC mud truck |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Jul 2012
Location: Ft Wayne Indiana
Posts: 1,204
|
Re: Gas Tank Confusion
Bump
__________________
71 K20 64 GMC mud truck |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Aug 2012
Location: Indiana
Posts: 470
|
Re: Gas Tank Confusion
im unsure on the answer.. lol someone has to know the answer u need... bump
__________________
70 C10 working on a LSx swap ![]() 4.8L MS3 edelbrock pro flo intake, pacesetter long tubes, 4l60e 2500 stall hoping the tranny holds up lol |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Jul 2012
Location: Ft Wayne Indiana
Posts: 1,204
|
Re: Gas Tank Confusion
Thank you, can't believe nobody's been able to help me yet..
PLEASE!!!!! ![]()
__________________
71 K20 64 GMC mud truck |
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Aug 2009
Location: St. Paul MN.
Posts: 1,996
|
Re: Gas Tank Confusion
My 71 has a eec tank and has a vent hose from the filler tube to the top of the tank the rubber hose is about 4 inch long I do not see that on your first pic. Also the eec tank has a vent tube that goes up the passanger door pillar and comes back down and goes through the floor next to the line off the sending unit that runs up to the canister i did not see that in your last pic. that is not a eec tank
__________________
Fuzzy |
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Jul 2012
Location: Ft Wayne Indiana
Posts: 1,204
|
Re: Gas Tank Confusion
I've just wondered if the tank was replaced and nobody hooked the EEC lines back up though.
According to what I've read in catalogs, the EEC tank has a "bumpy" filler neck, which is what mine has.
__________________
71 K20 64 GMC mud truck |
![]() |
![]() |
![]() |
#8 |
Registered User
Join Date: Aug 2009
Location: St. Paul MN.
Posts: 1,996
|
Re: Gas Tank Confusion
your tank does not have the fittings soldered in the tank for the eec hook up
__________________
Fuzzy |
![]() |
![]() |
![]() |
#9 |
Registered User
Join Date: Jul 2012
Location: Ft Wayne Indiana
Posts: 1,204
|
Re: Gas Tank Confusion
Well I guess that answers my question. Thanks!
![]()
__________________
71 K20 64 GMC mud truck |
![]() |
![]() |
![]() |
#10 |
"Ochre Ogre"
Join Date: Apr 2000
Location: Springfield, MN
Posts: 3,558
|
Re: Gas Tank Confusion
3/4 ton trucks did not get the emissions controls that 1/2 ton trucks did. A 71 half ton would have the eec lines and a smaller diam gas cap(non vented) while the C20/K20's and heavier did not.
__________________
Bowtie Truck Stop Inc. Mid-West GM Truck Restoration Parts Supplier Your Key Parts, Auto Metal Direct, Dynacorn, and Goodmark dealer. like us @ www.facebook.com/BowtieTruckStop 1971 C-10 Suburban (Ochre) 1971 K-10 Suburban (Ochre) 1972 C-10 Suburban (Ochre) 1972 K-20 Suburban (Yellow- that just aint right!) Springfield, Minnesota 56087 |
![]() |
![]() |
![]() |
Bookmarks |
|
|