spindles - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jgh64pkup · 06-17-2009, 12:09 AM

is there any way i can put passenger car spindles rotors and calipers on my 1980 c10 frontend on my 64 c10 pickup
im wanting to do this so i can have 5 on 4 3/4 bolt pattern instead of 5 on 5

PBFAB.COM · 06-17-2009, 12:20 AM

We just have the rotors re-drilled to the 5x4.75 bolt pattern. You may also have to turn down the nose-cone on the rotor if running a car wheel.

jgh64pkup · 06-17-2009, 12:27 AM

how much do you charge to redrill the rotor
but i really wanted some aftermarket brakes like aerospace or wilwood

PBFAB.COM · 06-17-2009, 12:32 AM

Quote:

Originally Posted by jgh64pkup

how much do you charge to redrill the rotor
but i really wanted some aftermarket brakes like aerospace or wilwood

I also sell the Mcgaughy's 13" brake kits for our trucks. They are offered in a 5x4.75 bolt pattern. It's a pretty nice kit. It includes rotors (cross-drilled), spindles, bearings, seals, calipers, and hardware for $749.

I was having a machine shop re-drill them and turn the nose cone down... $50.

jgh64pkup · 06-17-2009, 12:34 AM

Quote:

Originally Posted by porterbuilt

I also sell the Mcgaughy's 13" brake kits for our trucks. They are offered in a 5x4.75 bolt pattern. It's a pretty nice kit. It includes rotors (cross-drilled), spindles, bearings, seals, calipers, and hardware for $749.

I was having a machine shop re-drill them and turn the nose cone down... $50.

50 a piece
so there is no way i could get different ball joints and get the spindles to work
maybe off of a chevelle

PBFAB.COM · 06-17-2009, 12:40 AM

Quote:

Originally Posted by jgh64pkup

50 a piece
so there is no way i could get different ball joints and get the spindles to work
maybe off of a chevelle

You may be able to get them to bolt up, but due to the different spindle heights and outer tie rod location of the steering arm, you would be bolting up some suspension and steering headaches as well.

AVS_JASON · 06-17-2009, 05:12 PM

McGaughys makes awesome parts. And they stand behind everything that they manufacture.

Plus those rotors look SEXY as hell......

06-17-2009, 12:09 AM	#1
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	spindles is there any way i can put passenger car spindles rotors and calipers on my 1980 c10 frontend on my 64 c10 pickup im wanting to do this so i can have 5 on 4 3/4 bolt pattern instead of 5 on 5 __________________ Gage 1967 C10 Shortbed Stepside

06-17-2009, 12:20 AM	#2
PBFAB.COM Senior Member Join Date: Dec 2003 Location: Mesa,Az Posts: 3,981	Re: spindles We just have the rotors re-drilled to the 5x4.75 bolt pattern. You may also have to turn down the nose-cone on the rotor if running a car wheel. __________________ www.PorterbuiltFabrication.com Phone: 480-297-2621 E-mail: sales@pbfab.com Find us on FaceBook under Porterbuilt Fabrication Specializing in Chassis and Suspension Components for your Classic Chevrolet Truck. We offer components from the following manufacturers: Porterbuilt Accuair Ridetech (Air Ride Technologies) Air Lift Wilwood Intro Unisteer ECE Gotta Show Air Lift Borgeson CPP Supporting this forum since 2003!

06-17-2009, 12:27 AM	#3
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: spindles how much do you charge to redrill the rotor but i really wanted some aftermarket brakes like aerospace or wilwood __________________ Gage 1967 C10 Shortbed Stepside Last edited by jgh64pkup; 06-17-2009 at 12:28 AM.

06-17-2009, 05:12 PM	#7
AVS_JASON AIRBAGPARTS.COM Join Date: Dec 2008 Location: CEN CAL Posts: 520	Re: spindles McGaughys makes awesome parts. And they stand behind everything that they manufacture. Plus those rotors look SEXY as hell......



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.