KS '67 - '68 Buddy Seat Adjustment Handles - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Harleys 4 You** · 09-11-2011, 05:49 PM

I have 11 adjustment handles for sale. I had one, but needed a second one. I couldn't find any for sale, so I took the one I had to a machinist. He agreed to make the handles, but I had to have a minimum of 12 to make it worth his while. He made them as close to original as he could. They have the correct size ball on the end, which as been silver soldered on and will not pop off. These are made out of solid steel and will not break like the original ones had a tendency to do. I had them painted flat aluminum, which looks close to the original. You can easily repaint them, if you prefer a different look. They are $55 each, including shipping (within the US). If you buy more than 1, it will be $50 per handle. I'd like to limit to 2 for the time being until I know how well this will go. I can have him make more for me, if need be.
Yes, I know there are only 5 pictured.

**72ironmike** · 09-11-2011, 11:03 PM

Those are very, very nice !

**Harleys 4 You** · 09-16-2011, 12:04 PM

ttt

**Harleys 4 You** · 09-20-2011, 10:35 PM

ttt

**Harleys 4 You** · 09-24-2011, 12:04 PM

ttt

**Harleys 4 You** · 10-08-2011, 12:33 PM

ttt

**Harleys 4 You** · 10-28-2011, 10:41 PM

ttt

**Harleys 4 You** · 11-24-2011, 09:54 PM

ttt

ortegamotor · 11-25-2011, 01:41 AM

Nice work

**29od1** · 11-27-2011, 11:01 PM

Do you still have some of these left? I sent you a PM.

**Harleys 4 You** · 11-27-2011, 11:21 PM

Yes, I still have some. I just read your pm. Sorry I never got back with you. I'll answer your other questions directly to it.

**29od1** · 11-28-2011, 02:06 PM

Just picked up a couple of these from Larry. Very nice parts and even nicer guy! Anyone needing a handle, he's got a few left.

**Harleys 4 You** · 12-01-2011, 12:45 AM

ttt

**Harleys 4 You** · 01-11-2012, 06:16 PM

ttt

**Harleys 4 You** · 07-14-2012, 02:23 PM

ttt

**Harleys 4 You** · 11-28-2013, 10:53 PM

ttt

**Cash3481** · 11-29-2013, 12:11 AM

Larry,

I'll take one and can pick it up if that's available?

Mike

TazmanB · 11-29-2013, 09:12 AM

I will take one if you still have any left. PM payment info please

gonnuts · 11-29-2013, 09:15 AM

I'll take one if there' s any left.

nobolt · 11-29-2013, 12:08 AM

i'll take one. PM for info please

chevyguy_72 · 11-29-2013, 09:53 AM

I would be interested in one too... I realize that might not happen because this is an old thread...

**Harleys 4 You** · 11-29-2013, 01:03 PM

I still have several left. I'll PM details if anyone lets me know that they want one.

**Cash3481** · 11-30-2013, 02:20 AM

Larry,
It was nice meeting you today!
Thank you for offering these to the board.
TTT for you.

V/R,
Mike

TazmanB · 11-30-2013, 06:49 PM

Money sent.

**396ci** · 12-05-2013, 06:56 PM

i would like 2. also sent you a pm. thanks

09-11-2011, 05:49 PM	#1
Harleys 4 You Senior Member Join Date: Jul 2011 Location: Wichita, KS Posts: 520	'67 - '68 Buddy Seat Adjustment Handles I have 11 adjustment handles for sale. I had one, but needed a second one. I couldn't find any for sale, so I took the one I had to a machinist. He agreed to make the handles, but I had to have a minimum of 12 to make it worth his while. He made them as close to original as he could. They have the correct size ball on the end, which as been silver soldered on and will not pop off. These are made out of solid steel and will not break like the original ones had a tendency to do. I had them painted flat aluminum, which looks close to the original. You can easily repaint them, if you prefer a different look. They are $55 each, including shipping (within the US). If you buy more than 1, it will be $50 per handle. I'd like to limit to 2 for the time being until I know how well this will go. I can have him make more for me, if need be. Yes, I know there are only 5 pictured. Attached Images

09-11-2011, 11:03 PM	#2
72ironmike Senior Member Join Date: Jan 2004 Location: Olathe KS (Greater Kansas City MO Area) Posts: 2,048	Re: '67 - '68 Buddy Seat Adjustment Handles Those are very, very nice !

09-16-2011, 12:04 PM	#3
Harleys 4 You Senior Member Join Date: Jul 2011 Location: Wichita, KS Posts: 520	Re: '67 - '68 Buddy Seat Adjustment Handles ttt

09-20-2011, 10:35 PM	#4
Harleys 4 You Senior Member Join Date: Jul 2011 Location: Wichita, KS Posts: 520	Re: '67 - '68 Buddy Seat Adjustment Handles ttt

09-24-2011, 12:04 PM	#5
Harleys 4 You Senior Member Join Date: Jul 2011 Location: Wichita, KS Posts: 520	Re: '67 - '68 Buddy Seat Adjustment Handles ttt

10-08-2011, 12:33 PM	#6
Harleys 4 You Senior Member Join Date: Jul 2011 Location: Wichita, KS Posts: 520	Re: '67 - '68 Buddy Seat Adjustment Handles ttt

10-28-2011, 10:41 PM	#7
Harleys 4 You Senior Member Join Date: Jul 2011 Location: Wichita, KS Posts: 520	Re: '67 - '68 Buddy Seat Adjustment Handles ttt

11-24-2011, 09:54 PM	#8
Harleys 4 You Senior Member Join Date: Jul 2011 Location: Wichita, KS Posts: 520	Re: '67 - '68 Buddy Seat Adjustment Handles ttt

11-25-2011, 01:41 AM	#9
ortegamotor Registered User Join Date: Jun 2006 Location: auburn california Posts: 1,147	Re: '67 - '68 Buddy Seat Adjustment Handles Nice work

11-27-2011, 11:01 PM	#10
29od1 Senior Member Join Date: Oct 2006 Location: Wichita, Kansas Posts: 1,050	Re: '67 - '68 Buddy Seat Adjustment Handles Do you still have some of these left? I sent you a PM.

11-27-2011, 11:21 PM	#11
Harleys 4 You Senior Member Join Date: Jul 2011 Location: Wichita, KS Posts: 520	Re: '67 - '68 Buddy Seat Adjustment Handles Yes, I still have some. I just read your pm. Sorry I never got back with you. I'll answer your other questions directly to it.

11-28-2011, 02:06 PM	#12
29od1 Senior Member Join Date: Oct 2006 Location: Wichita, Kansas Posts: 1,050	Re: '67 - '68 Buddy Seat Adjustment Handles Just picked up a couple of these from Larry. Very nice parts and even nicer guy! Anyone needing a handle, he's got a few left.

12-01-2011, 12:45 AM	#13
Harleys 4 You Senior Member Join Date: Jul 2011 Location: Wichita, KS Posts: 520	Re: '67 - '68 Buddy Seat Adjustment Handles ttt

01-11-2012, 06:16 PM	#14
Harleys 4 You Senior Member Join Date: Jul 2011 Location: Wichita, KS Posts: 520	Re: '67 - '68 Buddy Seat Adjustment Handles ttt

07-14-2012, 02:23 PM	#15
Harleys 4 You Senior Member Join Date: Jul 2011 Location: Wichita, KS Posts: 520	Re: '67 - '68 Buddy Seat Adjustment Handles ttt



Register or Log In To remove these advertisements.

11-28-2013, 10:53 PM	#16
Harleys 4 You Senior Member Join Date: Jul 2011 Location: Wichita, KS Posts: 520	Re: '67 - '68 Buddy Seat Adjustment Handles ttt

11-29-2013, 12:11 AM	#17
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	Re: '67 - '68 Buddy Seat Adjustment Handles Larry, I'll take one and can pick it up if that's available? Mike

11-29-2013, 09:12 AM	#18
TazmanB Registered User Join Date: Jan 2011 Location: Arlington Texas Posts: 144	Re: '67 - '68 Buddy Seat Adjustment Handles I will take one if you still have any left. PM payment info please __________________ If you ask the question. Make sure you are ready for the answer. 69 C-10 Longbed (In Progress) Build thread http://67-72chevytrucks.com/vboard/s...d.php?t=568171

11-29-2013, 09:15 AM	#19
gonnuts Registered User Join Date: Sep 2010 Location: Langdon, Ab Posts: 348	Re: '67 - '68 Buddy Seat Adjustment Handles I'll take one if there' s any left. __________________ 67 Chev SWB, 400 SB .040 over, vortec heads, comp XE268 cam, performer EPS intake, edel. 650 AVS carb, 700R4

11-29-2013, 12:08 AM	#20
nobolt Registered User Join Date: Oct 2011 Location: Algonac, MI 48001 Posts: 1,848	Re: '67 - '68 Buddy Seat Adjustment Handles i'll take one. PM for info please __________________ Dave "... government even in its best state is but a necessary evil. Thomas Paine "It wasn't a lie, it was ineptitude with insufficient cover." Donald Draper (Mad Men)

11-29-2013, 09:53 AM	#21
chevyguy_72 Vintage Evil Join Date: Aug 2005 Location: Broomfield, CO Posts: 956	Re: '67 - '68 Buddy Seat Adjustment Handles I would be interested in one too... I realize that might not happen because this is an old thread...

11-29-2013, 01:03 PM	#22
Harleys 4 You Senior Member Join Date: Jul 2011 Location: Wichita, KS Posts: 520	Re: '67 - '68 Buddy Seat Adjustment Handles I still have several left. I'll PM details if anyone lets me know that they want one.

11-30-2013, 02:20 AM	#23
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	Re: '67 - '68 Buddy Seat Adjustment Handles Larry, It was nice meeting you today! Thank you for offering these to the board. TTT for you. V/R, Mike

11-30-2013, 06:49 PM	#24
TazmanB Registered User Join Date: Jan 2011 Location: Arlington Texas Posts: 144	Re: '67 - '68 Buddy Seat Adjustment Handles Money sent. __________________ If you ask the question. Make sure you are ready for the answer. 69 C-10 Longbed (In Progress) Build thread http://67-72chevytrucks.com/vboard/s...d.php?t=568171

12-05-2013, 06:56 PM	#25
396ci Senior Member Join Date: Jun 2005 Location: Modesto, CA Posts: 802	Re: '67 - '68 Buddy Seat Adjustment Handles i would like 2. also sent you a pm. thanks __________________ Brian XNGH ECV Chapter 58 1972 Jimmy / Blazer Project 2wd 1974 Chevy Crew Cab Shorty

Register or Log In To remove these advertisements.