Misc parts F/S - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Don Brace** · 11-09-2007, 03:19 PM

All parts in the pictures are $5.00 each plus shipping. Offers accepted. Please respond in thread. Thanks
One 4 BC spacer sold.

ratrod67 · 11-09-2007, 05:23 PM

Have any close up pics of the heater controls?

**Don Brace** · 11-09-2007, 08:13 PM

The center lever of the heater control is broken. The others are good. Chrom is not too bad. Will post a close up photo tomorrow.

alfeefish · 11-09-2007, 08:14 PM

If carb spacer is 4barrel what is shipping charges to37341?

**Don Brace** · 11-09-2007, 08:18 PM

The spacer is for a 4 BC. Shipping $6.00.

alfeefish · 11-09-2007, 08:24 PM

OK Paypal...Money order?

**Don Brace** · 11-09-2007, 08:46 PM

Paypal works for me. Will send address by PM.

sdkid · 11-10-2007, 08:50 AM

Is the carb spacer in the second pic available? I need a 4bbl spacer too.

70c10 · 11-10-2007, 09:06 AM

Don, please put me second in line on the heater controls.

**Don Brace** · 11-10-2007, 02:24 PM

Close up of the heater control. There are some scratches on the face but no pitting.
sold to 70c10

oldschooler · 11-10-2007, 02:43 PM

I will take the heater control if it gets to me. Thanks, Rich

67mater · 11-10-2007, 03:12 PM

what's the shipping to 61604 for the parking brake lever?

ratrod67 · 11-10-2007, 05:00 PM

Thanks for the pic but I'll pass.

70c10 · 11-10-2007, 06:55 PM

Since ratrod67 has passed, I'll take it. PM sent.

**Don Brace** · 11-14-2007, 07:45 PM

Update
The two carb spacers and the heater control were shipped this morning.
Thanks
Don

dave3156 · 11-15-2007, 08:55 AM

If there are not any dents in the front, I'll take the ash tray. Let me know shipping to 62234. Thanks

11-09-2007, 03:19 PM	#1
Don Brace Active Member Join Date: Nov 2002 Location: Clarks Grove MN Posts: 487	Misc parts F/S All parts in the pictures are $5.00 each plus shipping. Offers accepted. Please respond in thread. Thanks One 4 BC spacer sold. Attached Images __________________ Don Brace 55 Nomad 56 Nomad 58 Impalla Coupe 58 Bel-Aire 4D HT 61 Impala CVRT 409 4 SP 2- 71 Longhorns Always looking for old toy trains, Juke boxes Pin ball and game machines. Last edited by Don Brace; 11-09-2007 at 08:48 PM. Reason: update

11-09-2007, 05:23 PM	#2
ratrod67 Registered User Join Date: Sep 2002 Location: DFW Texas Posts: 2,270	Re: Misc parts F/S Have any close up pics of the heater controls?

11-09-2007, 08:13 PM	#3
Don Brace Active Member Join Date: Nov 2002 Location: Clarks Grove MN Posts: 487	Re: Misc parts F/S The center lever of the heater control is broken. The others are good. Chrom is not too bad. Will post a close up photo tomorrow. __________________ Don Brace 55 Nomad 56 Nomad 58 Impalla Coupe 58 Bel-Aire 4D HT 61 Impala CVRT 409 4 SP 2- 71 Longhorns Always looking for old toy trains, Juke boxes Pin ball and game machines.

11-09-2007, 08:14 PM	#4
alfeefish Registered User Join Date: Feb 2005 Location: Harrison TN Posts: 183	Re: Misc parts F/S If carb spacer is 4barrel what is shipping charges to37341?

11-09-2007, 08:18 PM	#5
Don Brace Active Member Join Date: Nov 2002 Location: Clarks Grove MN Posts: 487	Re: Misc parts F/S The spacer is for a 4 BC. Shipping $6.00. __________________ Don Brace 55 Nomad 56 Nomad 58 Impalla Coupe 58 Bel-Aire 4D HT 61 Impala CVRT 409 4 SP 2- 71 Longhorns Always looking for old toy trains, Juke boxes Pin ball and game machines.

11-09-2007, 08:24 PM	#6
alfeefish Registered User Join Date: Feb 2005 Location: Harrison TN Posts: 183	Re: Misc parts F/S OK Paypal...Money order?

11-09-2007, 08:46 PM	#7
Don Brace Active Member Join Date: Nov 2002 Location: Clarks Grove MN Posts: 487	Re: Misc parts F/S Paypal works for me. Will send address by PM. __________________ Don Brace 55 Nomad 56 Nomad 58 Impalla Coupe 58 Bel-Aire 4D HT 61 Impala CVRT 409 4 SP 2- 71 Longhorns Always looking for old toy trains, Juke boxes Pin ball and game machines.

11-10-2007, 08:50 AM	#8
sdkid Registered User Join Date: Sep 2004 Location: Pierre SD Posts: 1,533	Re: Misc parts F/S Is the carb spacer in the second pic available? I need a 4bbl spacer too. __________________ I think the world needs a drink... Help somebody...If you can....VanZant We're not wrong, we're not sorry, and its probably gonna happen again. That's the truth about men. Tracy Byrd Member# 13924 '70 c10, 350/350 '68 c10 250/4spd '68 c10 no eng/trans fac ps/pb/ac/at (future father/sons project) '48 Chevy Loadmaster

11-10-2007, 09:06 AM	#9
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,857	Re: Misc parts F/S Don, please put me second in line on the heater controls. __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

11-10-2007, 02:24 PM	#10
Don Brace Active Member Join Date: Nov 2002 Location: Clarks Grove MN Posts: 487	Re: Misc parts F/S Close up of the heater control. There are some scratches on the face but no pitting. sold to 70c10 Attached Images __________________ Don Brace 55 Nomad 56 Nomad 58 Impalla Coupe 58 Bel-Aire 4D HT 61 Impala CVRT 409 4 SP 2- 71 Longhorns Always looking for old toy trains, Juke boxes Pin ball and game machines. Last edited by Don Brace; 11-11-2007 at 06:47 PM. Reason: update

11-10-2007, 02:43 PM	#11
oldschooler Registered User Join Date: Mar 2007 Location: spring grove, Pa. Posts: 538	Re: Misc parts F/S I will take the heater control if it gets to me. Thanks, Rich Last edited by oldschooler; 11-10-2007 at 02:45 PM. Reason: didnt specify part

11-10-2007, 03:12 PM	#12
67mater Registered User Join Date: Sep 2007 Location: Mundelein, IL Posts: 862	Re: Misc parts F/S what's the shipping to 61604 for the parking brake lever? __________________ time is inversely proportional to money; that's why it takes me so long 1967 K10 1967 Camaro

11-10-2007, 05:00 PM	#13
ratrod67 Registered User Join Date: Sep 2002 Location: DFW Texas Posts: 2,270	Re: Misc parts F/S Thanks for the pic but I'll pass.

11-10-2007, 06:55 PM	#14
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,857	Re: Misc parts F/S Since ratrod67 has passed, I'll take it. PM sent. __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

11-14-2007, 07:45 PM	#15
Don Brace Active Member Join Date: Nov 2002 Location: Clarks Grove MN Posts: 487	Re: Misc parts F/S Update The two carb spacers and the heater control were shipped this morning. Thanks Don __________________ Don Brace 55 Nomad 56 Nomad 58 Impalla Coupe 58 Bel-Aire 4D HT 61 Impala CVRT 409 4 SP 2- 71 Longhorns Always looking for old toy trains, Juke boxes Pin ball and game machines.



Register or Log In To remove these advertisements.

11-15-2007, 08:55 AM	#16
dave3156 Registered User Join Date: Mar 2004 Location: St. Louis, MO Posts: 336	Re: Misc parts F/S If there are not any dents in the front, I'll take the ash tray. Let me know shipping to 62234. Thanks Last edited by dave3156; 11-15-2007 at 08:56 AM.