TN SBC parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

68Stepbed · 02-02-2012, 08:28 AM

I'm pulling the 350 out of my truck and replacing with an LS1, so I have a few parts I need to get rid of.

All prices are negotiable.

Alan Grove A/C bracket for Sanden compressor. BNIB painted but never installed. $60

Forward position V8 engine towers. $25

Stock trans. crossmember. $35

-GM 290 hp cam Dur- I: 222 deg E: 222 @.050" Lift- I: .450 E: .460 with lifters. Less than 100 miles. $100

**zicc1835** · 02-02-2012, 10:21 AM

good morning do you have a part # on the headers and does price include ship?
thanks
Jess

Quote:

Originally Posted by 68Stepbed

I'm pulling the 350 out of my truck and replacing with an LS1, so I have a few parts I need to get rid of.

All prices are negotiable.

-Z28 style stainless fuel line for 4150 Holley. $50

-Short water pump $20

-Aluminum pulleys for swp painted low gloss black 3 groove crank, 2 groove wp with nose cover. $50 for set

-power steering pump with keyway aluminum pulley. Works great, no leaks. Willing to seperate the pulley and sell seperate or add pulley in with other pulley set above. $40 with pulley, $30 without pulley

-67-72 truck swp power steering brackets(2 pieces) $35

-Alan Grove alt pulley(drivers side mount) $40

-GM(Proform) valve covers painted blue. $60

-Hedman Elite long tube headers with bolts. $120

-GM 290 hp cam Dur- I: 222 deg E: 222 @.050" Lift- I: .450 E: .460 with lifters. Less than 100 miles. $100

-Summit brand valvesprings, locks and retainers. Good for up to .460 lift. Also less than 100 miles. $75

-LOKAR kickdown cable bracket for TH350. $5

-GM chrome plug wire looms with bowtie. Missing one of the 2-wire tabs. $5

-350 engine (needs rebuilt) originally a 260hp crate engine. $250 obo

socalkevin68 · 02-02-2012, 10:46 AM

ill take alt brackets pending shipping quote to 93555 zip code..thx

slammer72 · 02-02-2012, 11:56 AM

Second on headers pending shiping to 97080...
Posted via Mobile Device

**ScottH** · 02-02-2012, 12:41 PM

I'll take the lokar bracket and the GM chrome plug wire looms

Thanks
Scott

hatechew · 02-02-2012, 01:27 PM

Ill take the three pulleys if you want to split it from the p.s. pump. Maybe put me in line for the headers.
Posted via Mobile Device

68Stepbed · 02-02-2012, 02:02 PM

Quote:

Originally Posted by zicc1835

good morning do you have a part # on the headers and does price include ship?
thanks
Jess

part# is 69890 and shipping is extra.

Quote:

Originally Posted by socalkevin68

ill take alt brackets pending shipping quote to 93555 zip code..thx

About $15 for shipping.

Quote:

Originally Posted by ScottH

I'll take the lokar bracket and the GM chrome plug wire looms

Thanks
Scott

I'll PM you my PayPal address. Do you need to know how much shipping will be?

Quote:

Originally Posted by hatechew

Ill take the three pulleys if you want to split it from the p.s. pump. Maybe put me in line for the headers.
Posted via Mobile Device

Yes, I'll seperate the pulley from the pump.

**zicc1835** · 02-02-2012, 02:47 PM

can you quote me on the headers to 07981 will be able to package them so they dont get dented up ? pretty please
thanks
Jess

Quote:

Originally Posted by 68Stepbed

part# is 69890 and shipping is extr
.

About $15 for shipping.

I'll PM you my PayPal address. Do you need to know how much shipping will be?

Yes, I'll seperate the pulley from the pump.

68Stepbed · 02-02-2012, 05:11 PM

Quote:

Originally Posted by zicc1835

can you quote me on the headers to 07981 will be able to package them so they dont get dented up ? pretty please
thanks
Jess

Hey, Jess. I will get them well packaged tonight and get a more accurate shipping quote in the morning for you. Without knowing full weight and dimensions, it's hard to get an actual price, but it looks like it'll be somewhere between $25-40.

**MidLifer** · 02-02-2012, 05:28 PM

I realize I'm late on this but I'll get in line for the headers if everyone else in front of me falls through.

**zicc1835** · 02-02-2012, 09:29 PM

ok im good with that send me PP when you get the shipping price and ill send the $$$s
thanks
Jess

Quote:

Originally Posted by 68Stepbed

Hey, Jess. I will get them well packaged tonight and get a more accurate shipping quote in the morning for you. Without knowing full weight and dimensions, it's hard to get an actual price, but it looks like it'll be somewhere between $25-40.

socalkevin68 · 02-02-2012, 02:22 PM

15 is good..where do i send money?

Pro Metal Shop · 02-02-2012, 03:33 PM

second in line for the pullies 17821

19stepSide72 · 02-02-2012, 04:29 PM

I will jump in line for the lokar bracket and looms.
Posted via Mobile Device

socalkevin68 · 02-02-2012, 04:39 PM

pay pal sent thx for alt brackets...
Kevin

aventur1 · 02-02-2012, 05:40 PM

You mentioned painted valve covers, just painted or powder coated? I'll take them if powder coated pending shipping cost to 83704

**ScottH** · 02-02-2012, 05:47 PM

yes total with shipping to 08753 please.....

thanks

CC69Rat · 02-02-2012, 05:55 PM

I thought you were going with a BB ??

68Stepbed · 02-02-2012, 06:50 PM

Quote:

Originally Posted by aventur1

You mentioned painted valve covers, just painted or powder coated? I'll take them if powder coated pending shipping cost to 83704

No, they're painted professionally. They're Atlantic Blue just like my truck.

Quote:

Originally Posted by ScottH

yes total with shipping to 08753 please.....

thanks

$10 for shipping+ $10 for the parts= $20 PM'ing you my PayPal address.

Quote:

Originally Posted by CC69Rat

I thought you were going with a BB ??

I was going to, but I found a good deal on an LS1 and I've really wanted to go LS for the past several years anyway.

aventur1 · 02-02-2012, 08:52 PM

Ok, pass on valve covers...thanks

oldblue1968chevy · 02-02-2012, 11:34 PM

Good luck matt. Still want to see your truck oneday. Get all the LS stuff learned and you can help me make the swap one day!

CC69Rat · 02-03-2012, 09:02 AM

Quote:

Originally Posted by oldblue1968chevy

Good luck matt. Still want to see your truck oneday. Get all the LS stuff learned and you can help me make the swap one day!

I saw the truck at Shades of the Past, it's incredible man. You need to see it.

Pro Metal Shop · 02-03-2012, 08:06 AM

Still in line for the pullies

Posted via Mobile Device

bigguy69 · 02-03-2012, 10:19 AM

i will take the pump if you leave the pulley on it.

**zicc1835** · 02-04-2012, 05:40 PM

payment sent for headers thank you

02-02-2012, 08:28 AM	#1
68Stepbed Registered User Join Date: Mar 2005 Location: 10-Uh-See Posts: 5,609	SBC parts I'm pulling the 350 out of my truck and replacing with an LS1, so I have a few parts I need to get rid of. All prices are negotiable. Alan Grove A/C bracket for Sanden compressor. BNIB painted but never installed. $60 Forward position V8 engine towers. $25 Stock trans. crossmember. $35 -GM 290 hp cam Dur- I: 222 deg E: 222 @.050" Lift- I: .450 E: .460 with lifters. Less than 100 miles. $100 __________________ Matt 68 C10 stepside, LS1/700R4, TCI Engineering suspension system Last edited by 68Stepbed; 03-26-2012 at 08:27 AM.

02-02-2012, 10:46 AM	#3
socalkevin68 Registered User Join Date: Nov 2008 Location: Ridgecrest, CA. Posts: 193	Re: SBC parts ill take alt brackets pending shipping quote to 93555 zip code..thx

02-02-2012, 11:56 AM	#4
slammer72 Registered User Join Date: Oct 2011 Location: Gresham oregon Posts: 309	Re: SBC parts Second on headers pending shiping to 97080... Posted via Mobile Device

02-02-2012, 12:41 PM	#5
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: SBC parts I'll take the lokar bracket and the GM chrome plug wire looms Thanks Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

02-02-2012, 01:27 PM	#6
hatechew Registered User Join Date: Dec 2011 Location: east, tennessee Posts: 8	Re: SBC parts Ill take the three pulleys if you want to split it from the p.s. pump. Maybe put me in line for the headers. Posted via Mobile Device

02-02-2012, 05:28 PM	#10
MidLifer Senior Member Join Date: Apr 2011 Location: South NJ Posts: 1,267	Re: SBC parts I realize I'm late on this but I'll get in line for the headers if everyone else in front of me falls through.

02-02-2012, 02:22 PM	#12
socalkevin68 Registered User Join Date: Nov 2008 Location: Ridgecrest, CA. Posts: 193	Re: SBC parts 15 is good..where do i send money?

02-02-2012, 03:33 PM	#13
Pro Metal Shop Registered User Join Date: Jun 2009 Location: Danville PA. Posts: 487	Re: SBC parts second in line for the pullies 17821 __________________ Thanks Steve http://chevylegends.com/forum/index.php

02-02-2012, 04:29 PM	#14
19stepSide72 wanna be 67 Join Date: May 2007 Location: Nor Cal Posts: 696	Re: SBC parts I will jump in line for the lokar bracket and looms. Posted via Mobile Device

02-02-2012, 04:39 PM	#15
socalkevin68 Registered User Join Date: Nov 2008 Location: Ridgecrest, CA. Posts: 193	Re: SBC parts pay pal sent thx for alt brackets... Kevin

02-02-2012, 05:40 PM	#16
aventur1 Registered User Join Date: Aug 2007 Location: Boise, Idaho Posts: 676	Re: SBC parts You mentioned painted valve covers, just painted or powder coated? I'll take them if powder coated pending shipping cost to 83704 __________________ 1968 4x4 Frame, with a 67 Cab and Bed A Shorter Step 1999 Dodge 2500 Cummins Diesel

02-02-2012, 05:47 PM	#17
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: SBC parts yes total with shipping to 08753 please..... thanks __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

02-02-2012, 05:55 PM	#18
CC69Rat Registered User Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,207	Re: SBC parts I thought you were going with a BB ?? __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

02-02-2012, 08:52 PM	#20
aventur1 Registered User Join Date: Aug 2007 Location: Boise, Idaho Posts: 676	Re: SBC parts Ok, pass on valve covers...thanks __________________ 1968 4x4 Frame, with a 67 Cab and Bed A Shorter Step 1999 Dodge 2500 Cummins Diesel

02-02-2012, 11:34 PM	#21
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: SBC parts Good luck matt. Still want to see your truck oneday. Get all the LS stuff learned and you can help me make the swap one day! __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4



Register or Log In To remove these advertisements.

02-03-2012, 08:06 AM	#23
Pro Metal Shop Registered User Join Date: Jun 2009 Location: Danville PA. Posts: 487	Re: SBC parts Still in line for the pullies Posted via Mobile Device __________________ Thanks Steve http://chevylegends.com/forum/index.php

02-03-2012, 10:19 AM	#24
bigguy69 dazed and confused Join Date: Jul 2008 Location: marion nc Posts: 1,649	Re: SBC parts i will take the pump if you leave the pulley on it. __________________ members met: redbaron69, billsbowtie,nc67

02-04-2012, 05:40 PM	#25
zicc1835 Senior Member Join Date: Mar 2011 Location: Hanover NJ Posts: 4,246	Re: SBC parts payment sent for headers thank you __________________ Doc & Kim build http://67-72chevytrucks.com/vboard/s...d.php?t=722288 I am from the desert http://67-72chevytrucks.com/vboard/s...d.php?t=650332 basket case build SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=648557

Register or Log In To remove these advertisements.