|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
01-03-2003, 12:18 AM
|
#1 |
|
Post Whore
 
Join Date: Feb 2000
Location: Rose Hill, KS, USA
Posts: 12,684
|
? about hydraulic clutch and brake hydroboost pedal swap
The 1989 1 ton that I got the 454 from has a hydralic clutch setup and the brakes have a hydroboost. I'm going to swap both to the 69. As I'm pulling the pedals from the 1989, what measurements should I take so I can duplicate the pedal swing?
On the clutch, am I just concerned with the stroke of the pushrod attached to the clutch pedal or do I also need to be aware of the distance the pedal moves. Same question about the brake pedal movement. As always - thanks for any and all help!!!
__________________
1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14 |
|
|
|
01-03-2003, 10:34 AM
|
#2 |
|
Post Whore
Join Date: Feb 2000
Location: Rose Hill, KS, USA
Posts: 12,684
|
Over night I got to thinking and I guess the distance that the pedal moves is not critical as that is dictated by how far the pushrod moves.
Hopefully get the pedals pulled tonight.
__________________
1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14 |
|
|
|
|
| Bookmarks |
|
|
Hybrid Mode
