Cab years? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Striker169 · 03-29-2005, 07:40 PM

Was my cab from 69 the same cab they put on in 72? Like if I bought a 72 AC Cab will it bolt up to my 69 body and frame?

Longhorn Man · 03-29-2005, 07:45 PM

It'll fit, and look right to 99% of the ppl, but the throttle would be cable instead of mechanical linkage, the throttle predal would be suspended from the top instead of fixed to the floor...there would be a vent in the drivers door jamb...that's about all I can think of off the top of my head.

*screamin_c102* · 03-29-2005, 07:45 PM

There are some minor differences, but I'm pretty sure it will bolt on to a 1967-72 chassis. There is no provision for a roof mounted rearview (drill holes) and the door jambs have a vent in them that the previous years did not. The vent is basically a pressure release for when you close the door.

Somebody correct me if I'm wrong or off on any differences.

*screamin_c102* · 03-29-2005, 07:47 PM

Dang Longhorn look at our post times and comments. Thats weird.

Longhorn Man · 03-29-2005, 07:56 PM

The heater box will be differant too.

69 longhorn · 03-30-2005, 07:41 PM

Quote:

Originally Posted by Longhorn Man

The heater box will be differant too.

Whats a heaterbox......for that matter, what is door glass? My guess is they may be a LUXURY!

......Andy knows what I am talking about

L

**pjmoreland** · 03-29-2005, 09:01 PM

There's an extra hole in the floor under the seat in front of the gas tank for the extra EEC fuel lines. All 67-72 cabs are interchangeable as far as the cab mounts are concerned.

Striker169 · 03-30-2005, 07:36 PM

Wil the body mount up to the rest like my front pannels and the bed wont hit or anything will it?

Longhorn Man · 03-30-2005, 08:28 PM

striker, it is the exact same except the small details noted.
Al....a 5 million dollar 6 speed, talk of a new fuel injected motor...yet you still haven't made glass fot the chop top longhorn.

69 longhorn · 03-30-2005, 09:24 PM

Well, Andy she was low bucks for many yrs......im still paying for that 6 spd tho! the 1st time that old truck was really "twisted" on the open road, she was runnin a 425 Caddy! with the A pillars laid back 8-10 degrees, & 4" lopped off the top, she was a pretty smooth ride to about 140(all low bucks, that Caddy rocked

)......driveline issues , or out of balance tire kicked in @ that point, & it were time to shut that old Chev(or Caddy ) down

Low buckin is d@mn sweet, & that "fat Cad" rocks......only 1 thing I like more, (a fat Olds)......crazy Al

03-29-2005, 07:40 PM	#1
Striker169 Car O'Holic Join Date: Jan 2005 Location: Austin, Tx. Posts: 692	Cab years? Was my cab from 69 the same cab they put on in 72? Like if I bought a 72 AC Cab will it bolt up to my 69 body and frame?

03-30-2005, 09:24 PM	#10
69 longhorn Registered User Join Date: Aug 2001 Location: rock island,il,usa Posts: 5,382	Well, Andy she was low bucks for many yrs......im still paying for that 6 spd tho! the 1st time that old truck was really "twisted" on the open road, she was runnin a 425 Caddy! with the A pillars laid back 8-10 degrees, & 4" lopped off the top, she was a pretty smooth ride to about 140(all low bucks, that Caddy rocked )......driveline issues , or out of balance tire kicked in @ that point, & it were time to shut that old Chev(or Caddy ) down Low buckin is d@mn sweet, & that "fat Cad" rocks......only 1 thing I like more, (a fat Olds)......crazy Al __________________ http://community.webshots.com/user/hotrodhorn

03-29-2005, 07:45 PM	#2
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	It'll fit, and look right to 99% of the ppl, but the throttle would be cable instead of mechanical linkage, the throttle predal would be suspended from the top instead of fixed to the floor...there would be a vent in the drivers door jamb...that's about all I can think of off the top of my head.

03-29-2005, 07:45 PM	#3
screamin_c102 Account Suspended Join Date: Feb 2005 Location: Yoncalla Oregon Posts: 775	There are some minor differences, but I'm pretty sure it will bolt on to a 1967-72 chassis. There is no provision for a roof mounted rearview (drill holes) and the door jambs have a vent in them that the previous years did not. The vent is basically a pressure release for when you close the door. Somebody correct me if I'm wrong or off on any differences.

03-29-2005, 07:47 PM	#4
screamin_c102 Account Suspended Join Date: Feb 2005 Location: Yoncalla Oregon Posts: 775	Dang Longhorn look at our post times and comments. Thats weird.

03-29-2005, 07:56 PM	#5
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	The heater box will be differant too.

03-29-2005, 09:01 PM	#7
pjmoreland Senior Member Join Date: Jan 2005 Location: CA Posts: 5,426	There's an extra hole in the floor under the seat in front of the gas tank for the extra EEC fuel lines. All 67-72 cabs are interchangeable as far as the cab mounts are concerned.

03-30-2005, 07:36 PM	#8
Striker169 Car O'Holic Join Date: Jan 2005 Location: Austin, Tx. Posts: 692	Wil the body mount up to the rest like my front pannels and the bed wont hit or anything will it?

03-30-2005, 08:28 PM	#9
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	striker, it is the exact same except the small details noted. Al....a 5 million dollar 6 speed, talk of a new fuel injected motor...yet you still haven't made glass fot the chop top longhorn.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.