![]() |
|
![]() |
#1 |
Senior Member
Join Date: Apr 2001
Location: Amazonia, Mo. USA
Posts: 2,821
|
14 bolt FF ???'s
I am now in the market for a replacement for my 3/4 ton rear end. I have the Eaton 10 bolt and want a 14 FF. Is there a prefered year and engine to locate a 3:73 axle ? Or do I just dig through salvage yards til I find one ? I will also be changing the front axle to 3:73 at a later date. Where is the best place to find a Dana 44 with 3:73 ? Or should I just buy gears and install them into my case ? Thanks.
__________________
72 3/4 4x4 350 4spd 72 3/4 4x4 350 auto 2004 Duramax Silverado 4x4 2006 Duramax Crew cab 4x4 2010 Harley Ultra Limited 2011 Harley Street Glide |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Dec 1999
Location: Old Mission, MI, USA
Posts: 2,510
|
Most 14 bolts are 4.10 or 4.56. For 3.73s, you might look for a truck with a diesel. There are some 3.73 axles out there. If you don't want to move the spring pads, you will need one from a one ton truck, not 3/4 ton. Shock mounts will have to be moved on any 14 bolt to be used in your truck. 3.73 D44s are common in 4X4s from the '67 - '72 era. You would want to look for a '71 or '72 to get disk brakes, and most 6 cyl. trucks will have the 3.73s.
__________________
Tim |
![]() |
![]() |
![]() |
#3 |
Suburbans RULE!
Join Date: Jan 2000
Location: Clinton, IA 52732
Posts: 689
|
Any SRW 14 bolt FF will work, but if you find one from a single rear wheeled 1 ton, the spring perches will be 40.5" apart........which is what you need for a 67-72 truck. You can use one from a 3/4 ton but the spring perches are at 42" so they will need to be moved.
You will also need to move one of the shock tabs so they are both on the front of the axle. You may also want to check u-joints size and parking brake set-ups, there may be some differences.
__________________
--Ben 71 GMC Suburban 4X4 The "Beast" 388 CID Stroker, TH350, NP205, 8-lug D44, 14BFF w/ Detroit, 4.10:1 gears, 4-Wheel Disks 4" Lift, 35" MT/R's. |
![]() |
![]() |
![]() |
#4 |
Suburbans RULE!
Join Date: Jan 2000
Location: Clinton, IA 52732
Posts: 689
|
Blazer1970.....you are a fast typer!!
![]() If are looking for a Dana 44 to match the 14bff....get one from a 1977-up 3/4 ton. These use the internal hubs as well as the stronger 297X ujoint axle shafts. Obvioulsy just make sure you match the gear ratios front to rear.
__________________
--Ben 71 GMC Suburban 4X4 The "Beast" 388 CID Stroker, TH350, NP205, 8-lug D44, 14BFF w/ Detroit, 4.10:1 gears, 4-Wheel Disks 4" Lift, 35" MT/R's. |
![]() |
![]() |
![]() |
#5 |
Senior Member
Join Date: Apr 2001
Location: Amazonia, Mo. USA
Posts: 2,821
|
Thanks guys. I either need a five speed or a gear change. The 4:10's are killing me and since I never use 1st gear now, a rear change would give me the top where I need it and still have a good low. I will also be going to disc in the rear so I want to get started now.
Does the 77 have the same large style hubs that my 72 has ? Am getting new large hubs and would hate to not use them.
__________________
72 3/4 4x4 350 4spd 72 3/4 4x4 350 auto 2004 Duramax Silverado 4x4 2006 Duramax Crew cab 4x4 2010 Harley Ultra Limited 2011 Harley Street Glide |
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Aug 2002
Location: Trenton ,Texas
Posts: 328
|
NU2-72, I WAS LOOKING FOR A FF ALSO. I FOUND THAT MOST AUTOMATIC EQUIPT TRUCKS HAD 373. AND THE 4 SPEED HAD VERSIONS HAD 410 AND UP.
|
![]() |
![]() |
![]() |
#7 |
Currently Blazerless
Join Date: Apr 2000
Location: St. Joseph Mo.
Posts: 4,826
|
Kevin, stay away from 14 bolts from vans as they are wider than the truck rears, as for your large lockouts you will have to use the wheel hubs from the 44 you have now on the later model axle in order to use the large spicers, spindles and stub shafts are the same. I talked to a guy from Leavonworth at the Woodlands swapmeet that had a 3:73 14 bolt for sale[I think 200.00] and had a lot of chevy 1 and 3/4 ton driveline parts, I got his number if you need it.
__________________
1972 C/30 133" W.B. C&C 1970 GMC 3500 157" W.B. single wheel C&C |
![]() |
![]() |
![]() |
#8 |
Registered User
Join Date: Jul 2002
Location: SE NM
Posts: 769
|
hmmmm.. I got a van 14bolt because it was wider. I want the rear width to more closely match the front.
__________________
The more I learn about women, the more I love my truck. |
![]() |
![]() |
![]() |
#9 |
Cantankerous Geezer
Join Date: Aug 2002
Location: Bel Aire, KS
Posts: 6,264
|
Take a tape measure, too and check the width. Most that I have found in 3/4 ton pickups were the same width, the one tons are different. Also if the one ton didn't have beveled nuts, the studs will be severely worn and require stud replacement. The vans that I looked at were not only wider, but semi-floaters. A good junkyard can tell you which truck you need to look at. If they can't, I go on down the road and find another yard.
__________________
Fred There is no such thing as too much cam...just not enough engine. ![]() |
![]() |
![]() |
![]() |
#10 |
Registered User
Join Date: Apr 2001
Location: jefferson city, mo
Posts: 1,364
|
i have a 14 bolt ff here in missouri i would sale, it came from a 76 single wheel ton truck. I am not sure of the ratio but if some one will tell me what to check i can find out.
|
![]() |
![]() |
![]() |
Bookmarks |
|
|