KS Entire BB and tranny swapout with accessories

[Cash3481]

Im going to offer everything to make the BB switch out from whatever vehicle you currently have. I believe I have removed everything as far as the drive train goes to facilitate a seamless conversion to a BB swap.

Here is whats included.

1. High Hump with bolts
2. BB Fan Shroud with clips
3. Automatic Crossmember
4. 72 Pedal with Switch and harness
(harness is not the greatest but I may have another)
5. 4 core radiator hold downs (top and bottom)
6. Vacuum line to booster
7. BB Stands and clamshells
8. BB Shift linkage
9. All 6 Exhaust hangers with clips (missing one ruber isolator)
10. passenger side bb Heat shield
11. Engine Harness
12. Turbo 400 tranny
13. Entire 72 engine from air cleaner to oil pan with all asscessories.
i.e. Power steering pump, alternator and water pump with brackets attached.

I made a video of it running in the truck and will get it loaded for view tomorrow evening. It held great oil pressure at startup and after its warm both. The water pump shaft is noisy and squeeks a little at about the 1.15 mark but I can assure you the engine is sound. I drove this truck 20 miles at about 70 and around stop and go driving in town for 20 minutes last thursday, it ran fine on both trips. I also let it sit and idle on a 95 degree day for 20 minutes. If the water pump scares a potiential buyer ,I can replace it to assure the sale.

Today (16 July) I pulled the engine and am offering it here for $1400 as a bundle.
Why look all over for these parts when you can get them all at once?
If it doesnt sell together I will be parting this out in a week.

[Cash3481]

Price list below!
Engine Compartment
1972 only big block motor stands,clamshells and rubber mounts. $165 shipped.
Big block P.S. setup: remote can w/lid & mounting hardware. $225 plus shipping.
BB alternator brackets (no support rod). $75 Shipped
2-71/72 throttle cable with carburetor bracket & return spring. $25 shipped.
Vacuum Port for intake with 2 ports. $25 Shipped
Upper & lower 4 core radiator mounts. $40 shipped.
Clutch delete plate with hardware. $15 shipped.
Big block fan shroud w/clips (small holes around the edge by the fan side). $100 shipped.
BB/400 Shift linkage $50
Water pump/crank $65 shipped
Factory big block oil pressure gauge line w/correct block fitting. $40 shipped.
PB booster/rod and hardware (booster didn’t work well so I won’t ship it) $30 plus shipping
2 sets of Hood Hinges (both operate smooth and tight) $50 each plus shipping
Exhaust manifolds Part #’s ?????????????? LH and ????????????? RH $75 plus shipping
(Ill have to get the part #s tonight and update them)
Chassis
4- 16.5” Wheels some w/tire $10 each plus shipping
4- 16” wheels some with tires $10 each plus shipping
Big block dual exhaust hangers (six). $100 shipped.
Interior
71/72 gas pedal assembly with TH400 switch. $65 plus shipping
1972 parchment panels chalky $65 plus shipping.
Parchment visors with clips. $50 plus shipping.
parchment seat belts w/retractor covers. $100 shipped.
Parchment center belt. $50 shipped.
Radio and lighter power feeds. $12 each shipped.
Radio feed with speaker plug. $20 shipped.

[Critterman71]

looks like a pretty sweet deal!! especially for a complete swap out to a BBC. I have more than that in mine so far and not there yet. If this get parted I want to get in line for the parts. I need a few for sure. I have a list if they become available.

[Undone]

Inline for big block engine stands if you part.

[ksucatz]

I may be interested in the whole setup per our PM's yesterday. If I don't hear back from this other guy I have been talking to. It would also help if I could unload an LT1/4L60E combo I am sitting on. Garage is starting to fill up with engines!! No room to work!

[Cash3481]

Some pics of what is off today the rest is comming tomorrow.
I have the rest of the exhaust brackets ground off just havent punched the rivets through.
I had to clean up the mess early.

[Cash3481]

Engine/tranny/ heat shield pics.
Fuel pump is unbolted to get to the motor mount bolt.
I unbolted the harness and layed it across the engine.
I tried to leave everything as complete as possible.
The PO added an additional tranny cooler to the one in the radiator so the lines are cut to add that inline to the system.

[Critterman71]

Are you parting it now? if so I would take the air cleaner and spark arrestor hose and carb spacer, and stove pipe/ heat shield if still there. engine harness oil pressure line, pending prices and pictures, for starters I need to get my list for everything else I need

[Cash3481]

Critterman,
I am parting this one out now so I will get the price list together and post it in the first post. Sorry but I thought is would sell as a package deal for someone.
Mike

[Classic Heartbeat]

How mutch for the Big Block Stands? WES

[Cash3481]

Originally Posted by Classic Heartbeat

How mutch for the Big Block Stands? WES

Prices posted!

[Cash3481]

Originally Posted by Critterman71

Are you parting it now? if so I would take the air cleaner and spark arrestor hose and carb spacer, and stove pipe/ heat shield if still there. engine harness oil pressure line, pending prices and pictures, for starters I need to get my list for everything else I need

Get me a list and anything not previously asked about I will get you a price/pictures of them. Packaged deals will be cheaper than seperate prices.
Mike

[Critterman71]

The only other thing I need is the engine brackets that bolt to the motor that sit over the motor mount stands I have the frame stands just need the mount for the block and the parts I had in posting 8 thanks

[ksucatz]

I still want the whole package.

[Cash3481]

Originally Posted by Undone

Inline for big block engine stands if you part.

Undone you are first for another set of stands I have on the truck I brought home today $165 plus shipping.

Originally Posted by Critterman71

Are you parting it now? if so I would take the air cleaner and spark arrestor hose and carb spacer, and stove pipe/ heat shield if still there. engine harness oil pressure line, pending prices and pictures, for starters I need to get my list for everything else I need

I have another oil pressure line and engine harness for you but they are on the truck I brought home tonight so I still have to remove them, how is $50 shipped in a small FRB. For these two item if the pics suit your standards. If ksucats decides to not get the package by lunch tomorrow I'll get you the rest of what you need.

Originally Posted by Classic Heartbeat

How mutch for the Big Block Stands? WES

Wes you are 2nd on the stands at $165 I'll let you know if he passes.

Originally Posted by Critterman71

The only other thing I need is the engine brackets that bolt to the motor that sit over the motor mount stands I have the frame stands just need the mount for the block and the parts I had in posting 8 thanks

$50 for the clamshells and I'll put the oil pressure line and wiring harness in the same box so I guess that's $100 shipped for it all.

Clamshells

Originally Posted by ksucatz

I still want the whole package.

Pm sent you have until tomorrow to decide by lunch if I'm delivering it to Salina on Friday.

Mike
Posted via Mobile Device

[Critterman71]

sounds good to me Lets see if KSUcats comes through before we settle up and get final shipping costs.

[dxevo]

how much for the radiator? shipped to 92706

[Cash3481]

Originally Posted by dxevo

how much for the radiator? shipped to 92706

Dxevo, sorry radiator was used on something else.
Posted via Mobile Device

[gmc 2500 4x4]

can i see radio feed and speaker plug pic?

[Undone]

I'll pass.

[Cash3481]

Originally Posted by Classic Heartbeat

How mutch for the Big Block Stands? WES

Wes, you're up on the stands but critterman asked about the clamshells first! If you want just the stands I have an additional set on the truck I bought yesterday. I will do $100 shipped on them but it will be Sunday or Monday before I get them off.

Originally Posted by Critterman71

The only other thing I need is the engine brackets that bolt to the motor that sit over the motor mount stands I have the frame stands just need the mount for the block and the parts I had in posting 8 thanks

I posted you for $100 for the harness oil pressure line and clamshells shipped. These parts will come off the truck I bought yesterday, so I won't have them off until Sunday or Monday.

Originally Posted by gmc 2500 4x4

can i see radio feed and speaker plug pic?

I got busy loading the 72 with the BB I'm taking to salina tomorrow. I'll post a pic ASAP for you.

Mike
Posted via Mobile Device

[Critterman71]

No problem when you get to it is fine with me. does the new truck have the air cleaner and spacer/arrestor hose. Heat shield and stove pipe? Let me know when you get to it I can see you are busy with the delivery of the package deal.

[ksucatz]

Mike, it was great meeting you today. Can't wait to get the new motor in and fired up.
Posted via Mobile Device

[Cash3481]

Originally Posted by ksucatz

Mike, it was great meeting you today. Can't wait to get the new motor in and fired up.
Posted via Mobile Device

Brent,
Likewise! Lmk if you have any issues. Next time I drive up there let's do it with better weather... I lost 10 lbs sweating in the 72 bb sb on the way home. 60 miles an hour, 106 temps w/no ac. Oh and I stopped and changed a tire for a church group too. I guess I earned m boy scout pin today.lol
Mike
Posted via Mobile Device

[70STOVEBOLT]

Mike, has anyone spoken for the shift linkage yet?