The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 12-04-2005, 04:53 PM   #1
jugernot
Life, Be In It.....
 
jugernot's Avatar
 
Join Date: Oct 2003
Location: Novato, California
Posts: 1,498
Kick Panel Vents

Has anyone sealed off the kick panel vents? What are the advantages and disadvantages of doing so?
__________________
Project Name: LEMON DROP. Reconstruction started "December 2000". Projected completion date "Who knows"

http://67-72chevytrucks.com/vboard/s...d.php?t=200082
jugernot is offline   Reply With Quote
Old 12-04-2005, 10:28 PM   #2
Longhorn Man
its all about the +6 inches
 
Longhorn Man's Avatar
 
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
Re: Kick Panel Vents

Why would you want to seal them off?
They are awsome when it gets hot outside, if you have factoy A/C, it uses one, and if the seals are good, they shouldn't leak when closed.
Longhorn Man is offline   Reply With Quote
Old 12-04-2005, 10:34 PM   #3
Sweet72
Registered User
 
Sweet72's Avatar
 
Join Date: Nov 2003
Location: Alexandria, VA
Posts: 1,534
Re: Kick Panel Vents

Why on earth would you want to do that ...and eliminate the leaves, pine needles, dust and choking dirt in the cab on those beautiful early spring days.
__________________
'72 GMC SWB C1500 Custom, frame-off in progress. 383 SBC, 9:1CR, Comp Cams XE262H, Scat internal balanced crank, Eagle SIR 6" rods, Keith Black dish pistons, Dart Iron Eagle 72/180 heads, Weiand Stealth intake, Stewart stage I water pump, Holley 4bbl vac sec, TH350 with B&M Shift Improver Kit. 12 bolt positraction.

Last edited by Sweet72; 12-04-2005 at 10:35 PM.
Sweet72 is offline   Reply With Quote
Old 12-05-2005, 12:08 AM   #4
glock35ipsc
Next project: 1970 K10
 
glock35ipsc's Avatar
 
Join Date: Feb 2004
Location: Fort Collins, Colo 80524
Posts: 6,685
Re: Kick Panel Vents

That is actually number 2 on my list of things to get finished on my cab. My reasons for doing so is that I travel 4 miles of dirt road round trip to hit pavement. The dirt around here is like flour, so no matter how tight something is sealed, it still finds a way to get in I'm just hoping to swing the odds in my favor. That, and it will make one less place for the mice to get in.

And I am gonna run a Vintage Air a/c system when it's all said and done.
__________________
Bob

1970 Chevy K10 LWB "Goldie" 350/TH350 next project!!
1981 Chevy C10 LWB 355/TH350 - My son's truck

LS SWAP FORUM! Tons of LS swap info here!
PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET!
CLICK HERE FOR THE FAQ INDEX by KRUE
glock35ipsc is offline   Reply With Quote
Old 12-05-2005, 12:34 AM   #5
Striker169
Car O'Holic
 
Striker169's Avatar
 
Join Date: Jan 2005
Location: Austin, Tx.
Posts: 692
Re: Kick Panel Vents

does the Vintage air use them?
Striker169 is offline   Reply With Quote
Old 12-05-2005, 02:02 AM   #6
72MARIO
Registered User
 
72MARIO's Avatar
 
Join Date: Nov 2000
Location: Huntsville Ontario Canada
Posts: 4,052
Re: Kick Panel Vents

I love mine in the summer. That would be that last hole I welded up.
__________________
1968 Suburban numbers matching all original truck now equipped with 6.0/4L80 on Accuair
http://67-72chevytrucks.com/vboard/s...d.php?t=625017
1967 C/20 6.0/4L80 Roofing Truck
1990 V2500 Suburban "Plow Truck"
2005 TAHOE DD
72MARIO is offline   Reply With Quote
Old 12-05-2005, 02:12 AM   #7
cableguy0
Senior Member
 
Join Date: Apr 2000
Location: Delta,Pa
Posts: 14,950
Re: Kick Panel Vents

if you were to seal them up your cab would rot severely and in a hurry because the leaves dirt etc couldnt get out
__________________
Owner of North Point Car Care in Dundalk Md. We specialize in custom exhaust on both modern and classic vehicles. We are a full service auto shop from classics to modern vehicles. Feel free to contact me with questions. I will give a 10% discount to any board member.
cableguy0 is offline   Reply With Quote
Old 12-05-2005, 04:26 AM   #8
GMC Jim
Senior Member
 
GMC Jim's Avatar
 
Join Date: Dec 2002
Location: Portland, Oregon
Posts: 901
Re: Kick Panel Vents

When I repaired the flapper valves in the airconditioning; I also sealed both
kick panel vents. I desired outside air at all times; as myself and wife were smokers at the time. Built shields for upper portion of radio speakers ( to prevent rain damage) and mounted speakers in the kickpanle vents. Did this over 10 years ago... no problems and no regrets !....... Jim
__________________
'71 GMC;fleetside;PB/PS/AC/CC/402 Eng./Custom Paint/110,000act miles/3 fuel tanks(52gal).
GMC Jim is offline   Reply With Quote
Old 12-05-2005, 09:58 AM   #9
PanelDeland
I am a Referee of life.
 
PanelDeland's Avatar
 
Join Date: Jun 2000
Location: Greensboro N.C.
Posts: 13,993
Re: Kick Panel Vents

If you do seal the vents off make sure you address the drains in the bottom.If not you will have rotting leaves ect in the bottom of your fenders.I have cowl vent screens on my truck and they prevent anything but the smallest stuff from getting in there.I got them from Tim Christian if you need a set.
__________________
The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion.
You can't fix stupid,not even with duct tape.
"My appearance is due to the fact that "GOD" does punish you for having too much fun!"
Barrett-Jackson has perfected alchemy,they make rust into gold!
"You can lead a horse to water but you can't saddle a duck"
"Cleverly disguised as a 'Responsible Adult'
"Sometimes your Knight in shining armor is just a retard in tinfoil"
PanelDeland is offline   Reply With Quote
Old 12-05-2005, 12:12 PM   #10
Mixup
Registered User
 
Join Date: Jan 2002
Location: Henderson, NV
Posts: 358
Re: Kick Panel Vents

I have mine sealed off since I put in the Vintage Air 3 years ago. I don't worry about leaves all we have here is dust and cactus.
__________________
1980 Chevy Shortbed Pickup

1969 Z28 engine

Turbo 350
Mixup is offline   Reply With Quote
Old 12-05-2005, 01:18 PM   #11
ebfabman
Registered User
 
Join Date: Nov 2001
Location: Concord, NC
Posts: 2,489
Re: Kick Panel Vents

Sealing the fresh air vents in the kick panels will have no effect on whether or not the cowl area drains. If you seal the vents you will only have outside air with the factory A/C. At max cold setting, when all three control knobs are in the far left position at the dash A/C controls, the flapper door in the cowl is closed to outside air and the vent in the passenger kick panel is open. The fan is pulling air from inside the cab and recirculating it. This setting is like the recirculation on late model vehicles. The exception is that on these trucks there is still outside air entering the cab because the drain in the cowl just below the vent on the outside of the kick panel is not closed to the cab when the vent is open. This is why you still smell exhaust in traffic when the A/C is on. The drain hole is really more like a triangular shaped opening at the lower part of the cowl boxing shown at the arrow here. If this opening is clear, then the cowl will drain. One thing that might happen if the vents are sealed, it may be somewhat harder to close the doors because the sudden change in air pressure when the doors are closed. That air will not have the relief at the vents. So if your doors seal good, you may have to have the window slightly open til you are in an on your way. Seems like the cab will stay cleaner with the vents sealed. My vote is to seal the vents and install an aftermarket A/C system.
Attached Images
 
ebfabman is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 02:15 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com