Fresh 468 Big Block Chevy with rectangle ports - The 1947 - Present Chevrolet & GMC Truck Message Board Network

m6z · 08-30-2009, 09:41 PM

gone

m6z · 08-31-2009, 04:45 PM

Any interest? I want to move this motor quick so I don't end up buying a car to put it in. lol. I do it if it doesn't sell quick. Lets make a deal.

lyrikz · 09-17-2009, 09:58 AM

Quote:

Originally Posted by m6z

Any interest? I want to move this motor quick so I don't end up buying a car to put it in. lol. I do it if it doesn't sell quick. Lets make a deal.

Wow, AWESOME deal. I JUST did my 454 and wasnt bored to a 468 and i spent 4800 bucks. AWESOME deal. Bump for you and really REALLY wish i saw this a year ago. ahaha..

m6z · 09-21-2009, 12:42 PM

ttt......anyone?

lyrikz · 09-21-2009, 12:43 PM

Quote:

Originally Posted by m6z

ttt......anyone?

God, KILLS me to see this motor sitting there... Especially after i have done my own.

Good luck and bump for ya.

hounddogs! · 10-08-2009, 11:26 PM

pm sent

smoky02 · 08-31-2009, 04:48 PM

I wish I could afford it...but I'm stuck with my small block for now....bump for you.

1968SWBBigBlock · 08-31-2009, 11:10 PM

Bump for a bargin

m6z · 09-01-2009, 06:08 PM

$3000 anyone?

You couldn't build this motor for anywhere near this price.

**Hart_Rod** · 09-02-2009, 04:01 PM

Quote:

Originally Posted by m6z

$3000 anyone?

You couldn't build this motor for anywhere near this price.

How much to ship to 32571?

jeffspower · 09-02-2009, 04:49 PM

Hmm... I'd be tempted to trade this, it's got alot of fresh stuff too.

m6z · 09-02-2009, 05:25 PM

Quote:

Originally Posted by jeffspower

Hmm... I'd be tempted to trade this, it's got alot of fresh stuff too.

Thanks for the offer, but I don't have a use for another truck.

m6z · 09-02-2009, 05:24 PM

Quote:

Originally Posted by Hart_Rod

How much to ship to 32571?

No shipping unless you set it up. It shouldn't be a problem straping it to a pallet so It can be picked up. There is a forklife on site.

m6z · 09-02-2009, 03:49 PM

ttt......

m6z · 09-03-2009, 04:54 PM

ttt.....still got it.

m6z · 09-04-2009, 05:19 PM

ttt......

local13hutch · 09-05-2009, 07:23 AM

I am pretty far away but I would pay shipping I have so many projects and vehicles I dont know what you are inerested in. I have a 07 5.3 with less than 20.000 miles complete with trans never seperated and all wirirng and computer intact...I have a aamco brake lathe with all the tooling I over 2000$ just for the tooling and 3500$ for the lathe itself and its an american made model no crap. I also have 2 two post USA Made bend pac auto lifts and one four post with the alignment rack built in.. My phone number is (714) 591-6007 if you call please leave your 411 Maby we can make a deal...local13hutch...

m6z · 09-07-2009, 04:44 PM

Quote:

Originally Posted by local13hutch

I am pretty far away but I would pay shipping I have so many projects and vehicles I dont know what you are inerested in. I have a 07 5.3 with less than 20.000 miles complete with trans never seperated and all wirirng and computer intact...I have a aamco brake lathe with all the tooling I over 2000$ just for the tooling and 3500$ for the lathe itself and its an american made model no crap. I also have 2 two post USA Made bend pac auto lifts and one four post with the alignment rack built in.. My phone number is (714) 591-6007 if you call please leave your 411 Maby we can make a deal...local13hutch...

Some nice stuff. I'd be interested in a lift if I had a damn palce to put it, but currently no garage and no place to put it.

Also edited add.

C20-67_N_MO · 09-05-2009, 07:39 AM

Hmmm......man I would love to trade my 6 banger plus other goodies for this.

Free bump for ya.

Excellent price - it should sell.

m6z · 09-07-2009, 04:50 PM

ttt.....will ship at buyers expense.

larry may · 09-07-2009, 11:39 PM

2150 and I'll come get it.

m6z · 09-08-2009, 10:55 AM

Quote:

Originally Posted by larry may

2150 and I'll come get it.

lol, no thanks.

m6z · 09-09-2009, 12:43 PM

ttt....someone needs this.

m6z · 09-10-2009, 10:30 AM

ttt...

m6z · 09-11-2009, 10:55 AM

ttt for friday.

08-30-2009, 09:41 PM	#1
m6z Registered User Join Date: Aug 2008 Location: Pittsburg, KS Posts: 2,466	Fresh 468 Big Block Chevy with rectangle ports gone __________________ Doug Looking for a 67-72 short bed driver..... Last edited by m6z; 09-23-2011 at 08:50 PM.

08-31-2009, 04:45 PM	#2
m6z Registered User Join Date: Aug 2008 Location: Pittsburg, KS Posts: 2,466	Re: Fresh 468 Big Block Chevy with rectangle ports Any interest? I want to move this motor quick so I don't end up buying a car to put it in. lol. I do it if it doesn't sell quick. Lets make a deal. __________________ Doug Looking for a 67-72 short bed driver.....

09-21-2009, 12:42 PM	#4
m6z Registered User Join Date: Aug 2008 Location: Pittsburg, KS Posts: 2,466	Re: Fresh 468 Big Block Chevy with rectangle ports ttt......anyone? __________________ Doug Looking for a 67-72 short bed driver.....

10-08-2009, 11:26 PM	#6
hounddogs! Restoring it $200 at a time... Join Date: Aug 2008 Location: NE Kansas Posts: 886	Re: Fresh 468 Big Block Chevy with rectangle ports pm sent __________________ Charter member of the 'Put the dimmer switch back on the damn floor where it belongs' Society '68 5.3L-4 speed LWB C20; grandpa bought it for the farm in '71. Now LS 5.3, rather than 327. DD '09 Pilot Weekender '65 Skylark 300-4V-4 speed Wife's '07 Lexus ES350; 117 actuator motors and I can't see the engine. Son's '04 F250 SuperCab 6.0

08-31-2009, 04:48 PM	#7
smoky02 Registered User Join Date: Oct 2003 Location: Sunny, Florida, some might call it South Alabama Posts: 834	Re: Fresh 468 Big Block Chevy with rectangle ports I wish I could afford it...but I'm stuck with my small block for now....bump for you. __________________ Just sold my C10...sad day... Looking for a 1972 Blazer to hopefully fill the hole in my heart.

08-31-2009, 11:10 PM	#8
1968SWBBigBlock Active Member Join Date: Oct 2006 Location: Ohio Posts: 1,643	Re: Fresh 468 Big Block Chevy with rectangle ports Bump for a bargin __________________ 1968 SWB 454 + .040, 490HP x 540 FT pounds of Torque 10-1 Kb Forged pistons, recon rods w/ ARP wave loc bolts 781 heads Ported with 2.19/1.88 SSTvalves Lunati 60204 cam, Micro Trol lifters, Ported Edelbrock Performer Rpm manifold armor coated, Pertronix Triple Strike Ignition Holley 770 Street Avenger carb,Headers armor coated Built by Watson Ruppel Performance in Sarahsville Ohio. Hardshift Tranny Built Turbo 350,TSI 10" 3000 stall 12 Bolt Eaton Posi 4.10 Richmond Gears moser axles 18.5" x 31" Hoosier Pro Street Radials ET Classic 5 Wheels - polished Power Steering, Power Brakes,Disc Brakes,Tach & Gauge Dash, Tilt,Factory Air (gone) Custom Paint & Body Work Special thanks to my wife, my son and my money tree

09-01-2009, 06:08 PM	#9
m6z Registered User Join Date: Aug 2008 Location: Pittsburg, KS Posts: 2,466	Re: Fresh 468 Big Block Chevy with rectangle ports $3000 anyone? You couldn't build this motor for anywhere near this price. __________________ Doug Looking for a 67-72 short bed driver..... Last edited by m6z; 09-01-2009 at 06:08 PM.

09-02-2009, 04:49 PM	#11
jeffspower Well, Whoop-dee-do! Join Date: Mar 2003 Location: Easton, Mo. pop.- me & scarcely a few others Posts: 2,302	Re: Fresh 468 Big Block Chevy with rectangle ports Hmm... I'd be tempted to trade this, it's got alot of fresh stuff too. Attached Images __________________ '68 GMC shortbox 4x4 350/SM465/T221- bought it in '83 SOLD '72 K20 500 Cad/TH400/NP205 SOLD '92 Chevy 2500 6.5 mech TD 4L80E crusty daily driver '72 Monte Carlo... sweet low mile toy '11 Dodge Challenger IE 392 6spd... midlife car

09-02-2009, 03:49 PM	#14
m6z Registered User Join Date: Aug 2008 Location: Pittsburg, KS Posts: 2,466	Re: Fresh 468 Big Block Chevy with rectangle ports ttt...... __________________ Doug Looking for a 67-72 short bed driver.....

09-03-2009, 04:54 PM	#15
m6z Registered User Join Date: Aug 2008 Location: Pittsburg, KS Posts: 2,466	Re: Fresh 468 Big Block Chevy with rectangle ports ttt.....still got it. __________________ Doug Looking for a 67-72 short bed driver.....

09-04-2009, 05:19 PM	#16
m6z Registered User Join Date: Aug 2008 Location: Pittsburg, KS Posts: 2,466	Re: Fresh 468 Big Block Chevy with rectangle ports ttt...... __________________ Doug Looking for a 67-72 short bed driver.....

09-05-2009, 07:23 AM	#17
local13hutch MEMBER Join Date: Mar 2006 Location: garden grove, ca Posts: 185	Re: Fresh 468 Big Block Chevy with rectangle ports I am pretty far away but I would pay shipping I have so many projects and vehicles I dont know what you are inerested in. I have a 07 5.3 with less than 20.000 miles complete with trans never seperated and all wirirng and computer intact...I have a aamco brake lathe with all the tooling I over 2000$ just for the tooling and 3500$ for the lathe itself and its an american made model no crap. I also have 2 two post USA Made bend pac auto lifts and one four post with the alignment rack built in.. My phone number is (714) 591-6007 if you call please leave your 411 Maby we can make a deal...local13hutch... __________________ 86 sub 4wd, 1 ton, duallie, big block th475 72 c10 short fleet, pro street 72 K/5 blazer,2x4 almost stock 72 3/4 ton sub 4x4 61 morris minor pickup, chevy 4.3 v6 03 escalade, 24" momo's wifes 96 2wd 2door tahoe 67 2wd suburban 72 4wd k5 99 vortec 14bolt/d60 205/th400- 72 4wd crewcab 1 ton sb cummins allison -2012 2ss camaro black hard top- 8 yamaha quads- 05 4wd one ton duramax dually, family limo.

09-05-2009, 07:39 AM	#19
C20-67_N_MO Champagne Taste on Beer Budget Join Date: Dec 2008 Location: High Ridge, Missouri Posts: 2,190	Re: Fresh 468 Big Block Chevy with rectangle ports Hmmm......man I would love to trade my 6 banger plus other goodies for this. Free bump for ya. Excellent price - it should sell. __________________ Coming Soon: Project 1970 Country Truck

09-07-2009, 04:50 PM	#20
m6z Registered User Join Date: Aug 2008 Location: Pittsburg, KS Posts: 2,466	Re: Fresh 468 Big Block Chevy with rectangle ports ttt.....will ship at buyers expense. __________________ Doug Looking for a 67-72 short bed driver.....

09-07-2009, 11:39 PM	#21
larry may Senior Member Join Date: Jul 2005 Location: MISSOURI Posts: 3,256	Re: Fresh 468 Big Block Chevy with rectangle ports 2150 and I'll come get it. __________________ The biggest problem people have, is other people Thou shalt be cool and not hassle Be a site supporter. The heart of the wise inclines to the right, but the heart of the fool inclines to the left." Ecclesiastes 10:2



Register or Log In To remove these advertisements.

09-09-2009, 12:43 PM	#23
m6z Registered User Join Date: Aug 2008 Location: Pittsburg, KS Posts: 2,466	Re: Fresh 468 Big Block Chevy with rectangle ports ttt....someone needs this. __________________ Doug Looking for a 67-72 short bed driver.....

09-10-2009, 10:30 AM	#24
m6z Registered User Join Date: Aug 2008 Location: Pittsburg, KS Posts: 2,466	Re: Fresh 468 Big Block Chevy with rectangle ports ttt... __________________ Doug Looking for a 67-72 short bed driver.....

09-11-2009, 10:55 AM	#25
m6z Registered User Join Date: Aug 2008 Location: Pittsburg, KS Posts: 2,466	Re: Fresh 468 Big Block Chevy with rectangle ports ttt for friday. __________________ Doug Looking for a 67-72 short bed driver.....

Register or Log In To remove these advertisements.