1958 /1971 C-10 frame question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

fabguy · 11-12-2010, 09:34 PM

Ok, I thought I would come to the experts on this, I am usually on the older side, 47-59 board.
Ok, I have a 1958 fleetside truck with a 71-72 C-10 front clip. I lowered it with 2 1/2" drop spindles and pulled the springs until my bags show up, the crossmember is only about 3" from the floor but my body will be 1 1/2'' -2" from the floor. I C-nothed the rear with a 2 1/2" notch, (yeah I know, but baby steps for me)

I want the body to be about 1/2" from the floor How can I solve this problem economically. Will the bags compressed raise it? I got my bag setup from suicidedoors.

dan42 · 11-13-2010, 12:03 AM

I don't know the answer to your question, but that's probably an interesting looking truck.

grs · 11-13-2010, 12:15 AM

WE need a forum on air bagging trucks only. I know there is a lot of work involved in the job. My son wants to do it to my truck, and I have a lot of questions. I put a thread up , but got no help.

fabguy · 11-13-2010, 12:45 PM

Quote:

Originally Posted by dan42

I don't know the answer to your question, but that's probably an interesting looking truck.

Sorry, it has a 71-72 front FRAME clip. I was wondering if you guys who have bagged fronts, have had to extend your brake lines? if so, where did you get them?

**VetteVet** · 11-13-2010, 01:36 PM

Have you tried the "suspension" forum?
http://67-72chevytrucks.com/vboard/f...splay.php?f=25

11-12-2010, 09:34 PM	#1
fabguy Elev8r Man Join Date: Aug 2010 Location: Glendora, CA Posts: 835	1958 /1971 C-10 frame question Ok, I thought I would come to the experts on this, I am usually on the older side, 47-59 board. Ok, I have a 1958 fleetside truck with a 71-72 C-10 front clip. I lowered it with 2 1/2" drop spindles and pulled the springs until my bags show up, the crossmember is only about 3" from the floor but my body will be 1 1/2'' -2" from the floor. I C-nothed the rear with a 2 1/2" notch, (yeah I know, but baby steps for me) I want the body to be about 1/2" from the floor How can I solve this problem economically. Will the bags compressed raise it? I got my bag setup from suicidedoors. __________________ 1955.2 C4 Carry-all / Suburban ---> 55.2 Build Thread!! 1958 Fleetside SWB ---> 58 Fleetside Build thread 1939 2 door sedan *My F.B. project page.*

11-13-2010, 12:03 AM	#2
dan42 Registered User Join Date: Feb 2007 Location: Cali Central Coast Posts: 5,191	Re: 1958 /1971 C-10 frame question I don't know the answer to your question, but that's probably an interesting looking truck. __________________ '67 SWB Fleetside ZZ4/350/Tremec 5-speed/4link/Scott's IFS - and fun as heck! SOLD Click here to support the board Philippians 4: 6-7

11-13-2010, 12:15 AM	#3
grs Registered User Join Date: Jan 2010 Location: Roanoke, Tx. Posts: 1,561	Re: 1958 /1971 C-10 frame question WE need a forum on air bagging trucks only. I know there is a lot of work involved in the job. My son wants to do it to my truck, and I have a lot of questions. I put a thread up , but got no help.

11-13-2010, 01:36 PM	#5
VetteVet Msgt USAF Ret Join Date: Jan 2005 Location: Kalamazoo, Michigan Posts: 8,709	Re: 1958 /1971 C-10 frame question Have you tried the "suspension" forum? http://67-72chevytrucks.com/vboard/f...splay.php?f=25 __________________ VetteVet metallic green 67 stepside 74 corvette convertible 1965 Harley sportster 1995 Harley wide glide Growing old is hell, but it beats the alternative.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.