|
03-25-2010, 02:08 PM | #1 |
Project '67 454
Join Date: Jan 2009
Location: Columbia SC
Posts: 283
|
Picture Request
Can someone please post a picture of the correct routing of the E-Brake cable from the firewall down to the frame on a '69-'72.
I'm putting mine back together and it is making slight contact with the steering shaft the way I currently have it. Thanks, |
03-25-2010, 03:07 PM | #2 |
Registered User
Join Date: Sep 2008
Location: Calgary, AB
Posts: 32
|
Re: Picture Request
|
03-25-2010, 03:15 PM | #3 |
Project '67 454
Join Date: Jan 2009
Location: Columbia SC
Posts: 283
|
Re: Picture Request
Thanks for the picture.
I think I see my problem, there appears to be a clip hanging on that cable just below the steering shaft. Does it bolt to the inner fender somewhere below the steering shaft to hold it down? |
03-25-2010, 03:20 PM | #4 |
GMC with Blue Plaid
Join Date: Oct 2009
Location: Langdon, Alberta
Posts: 139
|
Re: Picture Request
As you can see on the lower right of this picture there is a screw clip that holds it to the inner fender well holding it away from the steering column.
__________________
Current: 1972 GMC Super Custom 1500 402 < 73K Orig MI 2015 GMC Canyon SLT(Daily Driver) Previous: 2008 Chevrolet Colorado LT 2.9L I4 1988 Chevrolet Suburban Silverado 10 350 < 60K Orig MI 1984 GMC S-15 2.8L V6 1976 GMC Sierra Classic 2500 Camper Special 350 1980 GMC High Sierra 3500 Dually 350 4spd 1974 Chevrolet Cheyenne Super 10 Shorty 454 (Was my Dads, I wish I still had it) 1969 GMC 910 250 I6 4spd |
03-25-2010, 03:22 PM | #5 |
Project '67 454
Join Date: Jan 2009
Location: Columbia SC
Posts: 283
|
Re: Picture Request
That's my problem,
Thanks everybody, |
Bookmarks |
|
|