WA Cab Cuts, generally $35ea plus shipping - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*randy500* · 03-29-2017, 05:49 PM

I want $50 per side for the front headliner. Good upper corners, lower fender mount pass side looks good, drivers side not quite as nice, but useable. Dash and firewall are nice. Uncut complete dash, $100.

*randy500* · 03-29-2017, 05:53 PM

I also have some other cabs I have been whittling on if you need something else...

*randy500* · 03-31-2017, 01:14 PM

Ttt

**Dave** · 03-31-2017, 02:59 PM

Got a couple questions on the cab.
Is the front windshield trim spoken for? If not, what's conditon and price?
Was this truck a long or short bed?

*randy500* · 03-31-2017, 03:08 PM

I probably have a nice set of trim, $100 plus shipping. It was a ling bed 3/4 ton

**c10-72 II** · 03-31-2017, 08:20 PM

How's the lower windshield channel?

*randy500* · 03-31-2017, 11:57 PM

Quote:

Originally Posted by c10-72 II

How's the lower windshield channel?

I'm sure it's fine, how much of it do you need

**c10-72 II** · 04-03-2017, 09:41 PM

Quote:

Originally Posted by randy500

I'm sure it's fine, how much of it do you need

To be safe the whole thing if possible. I have a noticeable spot drive side.

*randy500* · 04-04-2017, 12:18 AM

Quote:

Originally Posted by c10-72 II

To be safe the whole thing if possible. I have a noticeable spot drive side.

I didn't hear back from you right away so I cut that out with the dash, I cut it about 1/2" or so below the lower edge of the rubber, essentially where the cowl upper part is spotwelded to the windshield opening. Here is a picture.

seattle gmc · 03-31-2017, 10:43 PM

If the the glass is in good shape with no chips or cracks would you sell and i could do a local pick up? Im up in seattle.

seattle gmc · 03-31-2017, 10:45 PM

I was refering to the one pictured in the cut up cab.

*randy500* · 03-31-2017, 11:58 PM

Quote:

Originally Posted by seattle gmc

If the the glass is in good shape with no chips or cracks would you sell and i could do a local pick up? Im up in seattle.

The windshield is real nice tinted with the shade at the top, how does $75 sound

**Jcfcamaro** · 04-01-2017, 01:16 AM

Do you have the inside piece above the door. From visor back to the seam. The door seal slips into this area.

**Jcfcamaro** · 04-01-2017, 01:18 AM

Here's a picture.

*randy500* · 04-01-2017, 01:19 AM

Quote:

Originally Posted by Jcfcamaro

Here's a picture.

No i dont have that area

seattle gmc · 04-01-2017, 11:27 AM

Quote:

Originally Posted by randy500

The windshield is real nice tinted with the shade at the top, how does $75 sound

If you are able to get it our for me and i just pick it up i could do $75. I was going to buy a new piece of glass from QA auto glass on north 99 for $90. If you have some other things i need down there, maybe i could pick up a few other things and make the trip more worth while. send me a pm.

*randy500* · 04-01-2017, 11:29 AM

Quote:

Originally Posted by seattle gmc

If you are able to get it our for me and i just pick it up i could do $75. I was going to buy a new piece of glass from QA auto glass on north 99 for $90. If you have some other things i need down there, maybe i could pick up a few other things and make the trip more worth while. send me a pm.

PM sent

towbar · 04-01-2017, 08:56 AM

Hi Randy, I would be interested in the drivers side visor cut, you wouldn't happen to have a drivers side defrost duct fabric flex tube (from lower heat unit up to the defrost duct) you would throw in do you??

thanks

*randy500* · 04-01-2017, 10:11 AM

Quote:

Originally Posted by towbar

Hi Randy, I would be interested in the drivers side visor cut, you wouldn't happen to have a drivers side defrost duct fabric flex tube (from lower heat unit up to the defrost duct) you would throw in do you??

thanks

Sure I can send you a defrost tube, which side do you need. Non A/C hose?

Send me your zip and I will get you a shipping quote.
I also need dimension to center from the corner. Cost of shipping is dependent on the size.

towbar · 04-01-2017, 01:03 PM

Thanks Randy, Ill take a measurement and send you a pm

*randy500* · 04-01-2017, 01:34 PM

Quote:

Originally Posted by towbar

Thanks Randy, Ill take a measurement and send you a pm

Great, thanks.

**c10-72 II** · 04-04-2017, 04:13 PM

Let me take a pic tomorrow of where i need a patch. Sorry I'm usually on all the time.

*randy500* · 04-04-2017, 04:16 PM

Quote:

Originally Posted by c10-72 II

Let me take a pic tomorrow of where i need a patch. Sorry I'm usually on all the time.

Ok, post a pic of it and I will compare to what I have. to see if it will cover.

**c10-72 II** · 04-05-2017, 02:09 PM

Here's the area I need

*randy500* · 04-05-2017, 04:22 PM

i see what you need, i think i have that, will get you a pic tonight,

03-29-2017, 05:49 PM	#1
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Cab Cuts, generally $35ea plus shipping I want $50 per side for the front headliner. Good upper corners, lower fender mount pass side looks good, drivers side not quite as nice, but useable. Dash and firewall are nice. Uncut complete dash, $100. Attached Images

03-29-2017, 05:53 PM	#2
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: Cab Cuts, generally $35ea plus shipping I also have some other cabs I have been whittling on if you need something else...

03-31-2017, 01:14 PM	#3
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: Cab Cuts, generally $35ea plus shipping Ttt

03-31-2017, 02:59 PM	#4
Dave DND Trucks Join Date: Dec 1999 Location: NW Indiana Posts: 2,395	Re: Cab Cuts, generally $35ea plus shipping Got a couple questions on the cab. Is the front windshield trim spoken for? If not, what's conditon and price? Was this truck a long or short bed?

03-31-2017, 03:08 PM	#5
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: Cab Cuts, generally $35ea plus shipping I probably have a nice set of trim, $100 plus shipping. It was a ling bed 3/4 ton

03-31-2017, 08:20 PM	#6
c10-72 II Active Member Join Date: Sep 2013 Location: Elk Grove Village IL Posts: 152	Re: Cab Cuts, generally $35ea plus shipping How's the lower windshield channel? __________________ 1972 GMC C2500 Tow Rig project 1972 C10 Air Bag project 1967 C10 Drag Truck project 1967 GMC Patina Special project 1968 C10 I have no clue what to do with project 1969 GMC C6500 I wish I had more money project 1986 K10 I have too many damn projects

03-31-2017, 10:43 PM	#10
seattle gmc Registered User Join Date: Dec 2013 Location: Seattle, WA Posts: 155	Re: Cab Cuts, generally $35ea plus shipping If the the glass is in good shape with no chips or cracks would you sell and i could do a local pick up? Im up in seattle. __________________ 1970 GMC K2500 aka MaTeR 2007 Chevy Silverado 1500HD Classic

03-31-2017, 10:45 PM	#11
seattle gmc Registered User Join Date: Dec 2013 Location: Seattle, WA Posts: 155	Re: Cab Cuts, generally $35ea plus shipping I was refering to the one pictured in the cut up cab. __________________ 1970 GMC K2500 aka MaTeR 2007 Chevy Silverado 1500HD Classic

04-01-2017, 01:16 AM	#13
Jcfcamaro Senior Member Join Date: Jul 2015 Location: Fairfax, Missouri Posts: 1,049	Re: Cab Cuts, generally $35ea plus shipping Do you have the inside piece above the door. From visor back to the seam. The door seal slips into this area.

04-01-2017, 01:18 AM	#14
Jcfcamaro Senior Member Join Date: Jul 2015 Location: Fairfax, Missouri Posts: 1,049	Re: Cab Cuts, generally $35ea plus shipping Here's a picture. Attached Images

04-01-2017, 08:56 AM	#18
towbar Registered User Join Date: Jul 2012 Location: Marshall, NC....heart of the Appalachians.....aka, Gods country!! Posts: 537	Re: Cab Cuts, generally $35ea plus shipping Hi Randy, I would be interested in the drivers side visor cut, you wouldn't happen to have a drivers side defrost duct fabric flex tube (from lower heat unit up to the defrost duct) you would throw in do you?? thanks

04-01-2017, 01:03 PM	#20
towbar Registered User Join Date: Jul 2012 Location: Marshall, NC....heart of the Appalachians.....aka, Gods country!! Posts: 537	Re: Cab Cuts, generally $35ea plus shipping Thanks Randy, Ill take a measurement and send you a pm

04-04-2017, 04:13 PM	#22
c10-72 II Active Member Join Date: Sep 2013 Location: Elk Grove Village IL Posts: 152	Re: Cab Cuts, generally $35ea plus shipping Let me take a pic tomorrow of where i need a patch. Sorry I'm usually on all the time. __________________ 1972 GMC C2500 Tow Rig project 1972 C10 Air Bag project 1967 C10 Drag Truck project 1967 GMC Patina Special project 1968 C10 I have no clue what to do with project 1969 GMC C6500 I wish I had more money project 1986 K10 I have too many damn projects

04-05-2017, 02:09 PM	#24
c10-72 II Active Member Join Date: Sep 2013 Location: Elk Grove Village IL Posts: 152	Re: Cab Cuts, generally $35ea plus shipping Here's the area I need __________________ 1972 GMC C2500 Tow Rig project 1972 C10 Air Bag project 1967 C10 Drag Truck project 1967 GMC Patina Special project 1968 C10 I have no clue what to do with project 1969 GMC C6500 I wish I had more money project 1986 K10 I have too many damn projects

04-05-2017, 04:22 PM	#25
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: Cab Cuts, generally $35ea plus shipping i see what you need, i think i have that, will get you a pic tonight,



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.