PA I6 power steering pump with brackets and pulleys - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**1rippen6** · 12-04-2015, 10:27 PM

Removed this from an early 70's nova doesn't look the same as the trucks but appears that it mounts the same. It looks like the truck setup has 2 pulleys for the wp and 2 for the crank but this setup had an additional groove on both so I grabbed them encase the pump ran on them. The hoses were already gone and the pump spins fine but don't know if it works. Please make sure you know that it will work for your application because I will not. 125 shipped for everything. SOLD

**1rippen6** · 12-04-2015, 10:28 PM

last picture

**70STOVEBOLT** · 12-04-2015, 11:04 PM

Crank should not need a pulley. Damper should have 2 grooves.

**1rippen6** · 12-04-2015, 11:20 PM

The damper did but it had an third groove(pulley) bolted to it.

bigrigpardo · 12-04-2015, 11:28 PM

did you grab the 2 groove water pump pulley or just the extra third pulley? and did the alt have a double pulley?

**1rippen6** · 12-04-2015, 11:46 PM

I did grab the 2 groove water pump pulley and I didn't notice the alt. having a double pulley. I did zoom in on the picture I posted about 350% and it appears to be a single groove pulley but the picture gets a little blurry.

bigrigpardo · 12-05-2015, 12:44 AM

would you do 100 shipped to nj? if so I will take it.

bigrigpardo · 12-05-2015, 12:45 AM

and by chance was that nova an automatic with th350? I am looking for a proper kickdown linkage

**1rippen6** · 12-05-2015, 08:18 AM

I will do that as long as you cover PP fees and I don't know if it was automatic or not but can check if I go again.

**70STOVEBOLT** · 12-05-2015, 10:15 AM

The bolt on pulley for the crank and the extra pulley for the water pump are most likely for a/c.

**1rippen6** · 12-05-2015, 10:19 AM

It wasn't an a/c car unless it was an add on piece but i didn't see any signs of that. There was a V8 a/c car there.

bigrigpardo · 12-05-2015, 10:33 AM

payment sent

**70STOVEBOLT** · 12-05-2015, 10:36 AM

Probably smog pump then.

**1rippen6** · 12-05-2015, 10:56 AM

PP received will box up today should ship out Monday

**1rippen6** · 12-06-2015, 06:26 PM

Boxed up and ready to ship added a few more pictures because I removed it from the brackets to get it in a medium flat rate box.

12-04-2015, 10:27 PM	#1
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,708	I6 power steering pump with brackets and pulleys Removed this from an early 70's nova doesn't look the same as the trucks but appears that it mounts the same. It looks like the truck setup has 2 pulleys for the wp and 2 for the crank but this setup had an additional groove on both so I grabbed them encase the pump ran on them. The hoses were already gone and the pump spins fine but don't know if it works. Please make sure you know that it will work for your application because I will not. 125 shipped for everything. SOLD Attached Images Last edited by 1rippen6; 12-05-2015 at 02:58 PM.

12-04-2015, 10:28 PM	#2
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,708	Re: I6 power steering pump with brackets and pulleys last picture Attached Images

12-04-2015, 11:04 PM	#3
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,268	Re: I6 power steering pump with brackets and pulleys Crank should not need a pulley. Damper should have 2 grooves. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

12-04-2015, 11:20 PM	#4
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,708	Re: I6 power steering pump with brackets and pulleys The damper did but it had an third groove(pulley) bolted to it.

12-04-2015, 11:28 PM	#5
bigrigpardo Registered User Join Date: Sep 2008 Location: NEW MILFORD NJ Posts: 1,453	Re: I6 power steering pump with brackets and pulleys did you grab the 2 groove water pump pulley or just the extra third pulley? and did the alt have a double pulley?

12-04-2015, 11:46 PM	#6
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,708	Re: I6 power steering pump with brackets and pulleys I did grab the 2 groove water pump pulley and I didn't notice the alt. having a double pulley. I did zoom in on the picture I posted about 350% and it appears to be a single groove pulley but the picture gets a little blurry.

12-05-2015, 12:44 AM	#7
bigrigpardo Registered User Join Date: Sep 2008 Location: NEW MILFORD NJ Posts: 1,453	Re: I6 power steering pump with brackets and pulleys would you do 100 shipped to nj? if so I will take it.

12-05-2015, 12:45 AM	#8
bigrigpardo Registered User Join Date: Sep 2008 Location: NEW MILFORD NJ Posts: 1,453	Re: I6 power steering pump with brackets and pulleys and by chance was that nova an automatic with th350? I am looking for a proper kickdown linkage

12-05-2015, 08:18 AM	#9
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,708	Re: I6 power steering pump with brackets and pulleys I will do that as long as you cover PP fees and I don't know if it was automatic or not but can check if I go again.

12-05-2015, 10:15 AM	#10
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,268	Re: I6 power steering pump with brackets and pulleys The bolt on pulley for the crank and the extra pulley for the water pump are most likely for a/c. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

12-05-2015, 10:19 AM	#11
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,708	Re: I6 power steering pump with brackets and pulleys It wasn't an a/c car unless it was an add on piece but i didn't see any signs of that. There was a V8 a/c car there.

12-05-2015, 10:33 AM	#12
bigrigpardo Registered User Join Date: Sep 2008 Location: NEW MILFORD NJ Posts: 1,453	Re: I6 power steering pump with brackets and pulleys payment sent

12-05-2015, 10:36 AM	#13
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,268	Re: I6 power steering pump with brackets and pulleys Probably smog pump then. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

12-05-2015, 10:56 AM	#14
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,708	Re: I6 power steering pump with brackets and pulleys PP received will box up today should ship out Monday

12-06-2015, 06:26 PM	#15
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,708	Re: I6 power steering pump with brackets and pulleys Boxed up and ready to ship added a few more pictures because I removed it from the brackets to get it in a medium flat rate box. Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.