WA new installed Saddle Houndstooth 71-71 seat/cover

[John H.]

I have decided to go back to the original custom cloth interior that is not being reproduced. I stopped by SMS fabrics in Oregon, emptied my wallet, and will have a perfect match to my original saddle for 69. If you see the pictures, you will notice the difference of the 69-70 saddle versus the 71-72.

Very nice bench without any broken springs or foam work. I have driven this truck approximatley 400 miles since completion. The seat tracks shown are staying with my new seat, but it will have a nice set with this seat.

$600 obo. SOLD
Dash pad available for $50 sold

I can deliver to the Portland area.

Seat will be available in a couple weeks when my new one is done.

[rodstored-72]

that is a beautiful seat! & interior.i hope i am not hi-jacking but would you tell me the name of the carpet color & where you purchased it from? i wish this started a few weeks ago, i just got my seat recovered in a very similar color. wish you luck on the sale.... it should go pretty quickly!

thanks!!

[John H.]

TTT: Any interest?

Saddle dash pad $50.

[John H.]

My seat should be done in the next week or so so putting this to the top for interest.

[stllookn]

John, Nice looking seat...wish I had an ochre truck for that interior...it would be nice. Free bump for you.

[daves71k5]

How much for the dash pad shipped to Idaho? Zip is 83211 thanks Dave

[eagleuh1]

Would this work on a 68 Bench seat. I can't find any seat covers I like for my 68. Thanks. Also what would the cost be if so. Thanks again.

[John H.]

I am not sure what you are asking for the 68. The cover I had made for my 69 in original material would cost about $600. Basically $430 for the material and $170 labor.

[rodstored-72]

john, is the dash pad still available??? if so how much? is there any damage to it all??? also how or what was done to get it that color???

thanks!!
rodstored-72

[John H.]

They dash pad is original color 72 saddle which is more brown than my 69 saddle so nothing was done to the color. It is in an original repro box with original hardware from the black one I bought to replace it. I only have put around 500 miles on the truck since it was installed and I never added Armour All or any other product. I did not like my interior being two shades of saddle and I did add a tilt, so the dash should be black.

To Arizona I could do Fedex ground for $55 to your door. Would be better for me if you have a business address, but not a problem.

[orange-orange]

Hello John, When I read ''emptyed you wallet" I knew what you went thru to get the right material. I have a 72 that has the standard seat vynal in off-white or parchment and it took 3 years and 4 orders from SMS to get all of the correct pieces. Can you help with getting it all sewn together ? Thanks Randy

[John H.]

Yes,

I will give you a call. If you are not in a hurry, I am going to Portland for Xmas and could have it dropped off at the Upholstery shop?

[sameyrasmea72]

Did you decide to run the cloth with the lines going side to side or is that how they came? I thought they went from top to bottom like this seat. This seat has had 69-70 GM inserts placed on a original vinyl 72 seat, but the material is turned the oppisite way from yours. I don't know which way is correct, so I was checking.

[John H.]

We laid my original seat out and copied it as close as possible so I am pretty sure it is correct as original. The material was spot on as I took my original seat into SMS. I can stop bu later this month to verify. If it is wrong.....I will probably change it!

[sameyrasmea72]

Originally Posted by John H.

We laid my original seat out and copied it as close as possible so I am pretty sure it is correct as original. The material was spot on as I took my original seat into SMS. I can stop bu later this month to verify. If it is wrong.....I will probably change it!

I don't really know either. I just wanted to make sure that the guy who re-inserted the blue seat for me did it the correct way. I know in 71-72 they had 2 different cloth seats. The Cheyenne super got the hound tooth like on your first seat, and the custome deluxe got another cloth very similar to the your second seat and my redone blue seat. Except the line are a little thicker on the 71-72 pattern. In both of those cloths the line go from top to bottom.

Here are some original 72 seats.

[rodstored-72]

john,
i see what you mean (in pic #3) i see the color difference. my leather seat appears to be around the same color as your new seat, so i am a little concered about the matching too. my current pad is not in bad shape, i just am thinking that yours would be easier than getting mine recovered in the same leather as the seat- not to mention cheaper, but like you i want to make sure it matches descent as well & looks good to boot!!

thanks!!

i will ponder some more, don't hold for me. if still available when i decide i'll check back in...

[rustfree]

I would have to say the cloth is going in the wrong direction....should be up and down, not side to side. The original picture post has the cloth going in the correct direction.

[rodstored-72]

john,
is the dash pad still available? if so would you be willing to do me a quick favor? i would like to send you a small piece of my leather (from my seat) and have you take a picture with the leather piece up against (laying on) the dash pad... would you be willing to do that?

thanks!!

rodstored-72

[John H.]

No problem. I will PM my address.

John

[John H.]

Old thread but came across this picture of a 69 cst with the same interior as one mine. Before I found this, I thought Gmc might be different, but here is a cst with a saddle interior

I think the 71-72 lines are vertical versus the 69-70 horizontal.



Posted via Mobile Device

[a Good Man]

john I need these pieces, can they be available?

[a Good Man]

I need the Saddle seat cover with the inscriptions as shown in the picture . Thanks John

An example that I just want

[John H.]

This is all I have left.

I think the scrolls are incorrect for a 69-70 GMC, may be right for Chevy? They should have lines on the outside of the scroll work. They originally sent these to me and I had them remake correct for GMC.

There is one piece of vinyl left, but no where enough to do a seat.

You may need to order from SMS again. Are you going to add the bead around the edges?

[a Good Man]

Sorry for being late sir. I think it is different from what I want. I contacted the SMS company and waited for them to reply. Thank you

[John H.]

I did reach out to them to buy the correct scrolling so I have a second set. They quoted me $99 for just the two scroll sets.