misc. stuff to get it running - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ocbaud · 02-07-2004, 02:11 AM

okay, i know all the main, big stuff i gotta have to have the engine running, but....

can anyone give me parts numbers or a list of all the fittings and misc. stuff i still will need?

stuff like the heater hose fitting that goes into the intake, oil pressure sender unit, temp. sensor and stuff like that

*1FaastC10* · 02-07-2004, 02:54 AM

we need to know what you've already got first, then we can go from there.

ocbaud · 02-07-2004, 03:00 AM

i wanna replace every fitting i need to have.

so, in that case, i dont have anything.

all i can think of at the moment besides the 3 i mentioned in the first post, is the manifold vacuum connector.

79BIG10 · 02-07-2004, 07:10 AM

If you have stock gauges then you should be able to get the replacements easy from a dealership. On the fitting for the heater hose go into the HELP! section at an auto store and look for a 5/8 hose barb heater hose fitting. I'm thinking the pipe thread is a 1/2" NPT or 3/4" NPT. I'm betting 1/2"

gldevall · 02-07-2004, 01:22 PM

You should be able to use everything off of the old 305. I used almost everything off of the 4.3 when I swapped. I did get new sending units. Just ask for something from like an '85 and earlier truck with the 350.

02-07-2004, 02:11 AM	#1
ocbaud Garage Queen Material Join Date: Oct 2002 Location: USA Posts: 4,129	misc. stuff to get it running okay, i know all the main, big stuff i gotta have to have the engine running, but.... can anyone give me parts numbers or a list of all the fittings and misc. stuff i still will need? stuff like the heater hose fitting that goes into the intake, oil pressure sender unit, temp. sensor and stuff like that

02-07-2004, 07:10 AM	#4
79BIG10 I'm back with 2nd truck! Join Date: Feb 2002 Location: Texas Posts: 3,775	If you have stock gauges then you should be able to get the replacements easy from a dealership. On the fitting for the heater hose go into the HELP! section at an auto store and look for a 5/8 hose barb heater hose fitting. I'm thinking the pipe thread is a 1/2" NPT or 3/4" NPT. I'm betting 1/2" __________________ 1979 Chevrolet Bonanza Big10 "Tootsie Roll" 1985 Chevrolet Silverado (wife's) Member of the Southern Bowties Club "Don't underestimate how sexy a fat man who drinks to excess can be." Homer Simpson

02-07-2004, 01:22 PM	#5
gldevall Registered User Join Date: Mar 2003 Location: Walker, LA Posts: 2,925	You should be able to use everything off of the old 305. I used almost everything off of the 4.3 when I swapped. I did get new sending units. Just ask for something from like an '85 and earlier truck with the 350. __________________ Gary -1986 SWB: lowered 4/6, SOLD!!! -Best 1/4 mile: 14.51 @ 91.01 MPH -2001 Pewter Tahoe, billet grill, Corsa Sport Cat-back, K&N FIPK SOLD!!! -2004 Z-71 Extended cab with a flowmaster, BDS 6.5", 3" BL, 35x12.5x18 Trail Grapplers on Pro-Comp 18x9 wheels

02-07-2004, 02:54 AM	#2
1FaastC10 Account Suspended Join Date: Oct 2002 Location: Elkhart, IN Posts: 6,400	we need to know what you've already got first, then we can go from there.

02-07-2004, 03:00 AM	#3
ocbaud Garage Queen Material Join Date: Oct 2002 Location: USA Posts: 4,129	i wanna replace every fitting i need to have. so, in that case, i dont have anything. all i can think of at the moment besides the 3 i mentioned in the first post, is the manifold vacuum connector.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.