Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
|
07-01-2012, 08:15 PM | #1 |
Registered User
Join Date: Jan 2007
Location: Keller, TX
Posts: 143
|
Another AC Vacuum question
I am trying to find a good and strong source for the vacuum of my AC unit in my 72 C10 with factory air.
I need to run the hose from the vacuum tank under my dash to provide vacuum and was wondering which way would work best? I have two choices - (1) use a T and tap into the main line from the valve cover and the carb (2) use a T and tap into the vacuum advance of the distributor. What is your opinion - see two pictures below. Thanks for your help, KellerMac
__________________
Texas - Don't Let The Size Scare You! |
07-01-2012, 08:18 PM | #2 |
Senior Member
Join Date: Dec 2011
Location: Laurel, Mt.
Posts: 522
|
Re: Another AC Vacuum question
use the intake manifold vacuum in the second picture
__________________
1972 Cheyenne Super 10 SWB,bucket seats,dealer cruise,tilt,tac,a/c,shoulder belts, 350/350 1971 K-10 Custom Deluxe 1971 K-10 Custom |
07-01-2012, 09:40 PM | #3 |
Registered User
Join Date: Jan 2007
Location: Keller, TX
Posts: 143
|
Re: Another AC Vacuum question
Thanks med.bronze - does it matter which hose off the manifold that I hook to?
__________________
Texas - Don't Let The Size Scare You! |
07-01-2012, 09:43 PM | #4 |
Senior Member
Join Date: Dec 2011
Location: Laurel, Mt.
Posts: 522
|
Re: Another AC Vacuum question
no it shouldn't, but it might be better to put a 3-port vacuum fitting on the manifold.
__________________
1972 Cheyenne Super 10 SWB,bucket seats,dealer cruise,tilt,tac,a/c,shoulder belts, 350/350 1971 K-10 Custom Deluxe 1971 K-10 Custom |
Bookmarks |
|
|