Suspension parts for sale - The 1947 - Present Chevrolet & GMC Truck Message Board Network

MOTHERTRUCKERS · 04-06-2003, 10:14 AM

All used checked for wear lower/upper a arms for 67-72 c-10 and c-20 25.00 each. All 67-72 c-10 spindles 25.00 each, c-20 35.00 each. Trailing arms 40.00 each, coil springs 10.00. 67-70 front backing plates 5.00 each. Tons of frame parts and frames, no 4x4 parts. e-mail for availibility and shipping quote

jayssunm · 04-18-2003, 02:03 AM

Have any 5 lug axles for a 67 rear end? Or have inexpensive suggestions to convert to 5 from 6 lug?

MOTHERTRUCKERS · 04-18-2003, 06:08 AM

Yes we have axles or complete rearends but shipping to Ca is a killer. The cheapest way is pulling axles at bone yards or if you can't find them redrilling yours for 5 lug.

71custominworks · 04-18-2003, 01:43 PM

Needing 5-lug rear axle for my 71 1/2 ton. How much to 66762?

MOTHERTRUCKERS · 04-19-2003, 07:39 AM

Used axles 30.00 each, new 110.00 each, shipping guess 25.00.

pat · 04-23-2003, 05:20 PM

Do you have any dropped spindles or front drop springs?

MOTHERTRUCKERS · 04-23-2003, 05:53 PM

Yes we carry WESTERN drop spindles and EIBACH coils in our online catalog.

HotRod929 · 04-23-2003, 06:46 PM

Do you have any drop rear leaf springs???

Thanks
HotRod

Iron-Butt · 05-02-2003, 07:33 PM

are the western drop spindles good?

MOTHERTRUCKERS · 05-03-2003, 06:51 AM

WESTERN is the highest quality forged spindle on the market. They are a direct bolt in with no balljoint or tierod changes or alignment needed and converts your truck to disc brakes with a 2 1/2" drop. They carry a lifetime warranty.

john j · 05-03-2003, 07:15 AM

Has anyone "left" any 55-58 mono leafs there?

MOTHERTRUCKERS · 05-03-2003, 09:31 AM

No but we have new ones.

john j · 05-03-2003, 10:27 AM

Sorry mother i thought you only dealt in 67-72 stuff. When the front axel gets here i will be ordering a set of mono leafs. Thanks johnj

MOTHERTRUCKERS · 05-03-2003, 09:39 PM

No problem we have parts for 41-72 just not all of them in our catalog yet.

john j · 05-04-2003, 06:08 PM

Ok i just finished dropping the front axel and springs out. The pins a screw in type, top and bottom. With the new mono leafs will i use the same screw in type or just a regular pin? Also what about the top mount? Will i have to change to a new type of bushing? The back seem to just have a bolt type of pin it it. johnj

04-06-2003, 10:14 AM	#1
MOTHERTRUCKERS Registered User Join Date: Dec 1999 Location: BRADENTON FLA Posts: 3,269	Suspension parts for sale All used checked for wear lower/upper a arms for 67-72 c-10 and c-20 25.00 each. All 67-72 c-10 spindles 25.00 each, c-20 35.00 each. Trailing arms 40.00 each, coil springs 10.00. 67-70 front backing plates 5.00 each. Tons of frame parts and frames, no 4x4 parts. e-mail for availibility and shipping quote __________________ Rest in Peace Ed. Thanks for all the good times.

04-18-2003, 02:03 AM	#2
jayssunm Registered User Join Date: Jan 2003 Location: San Diego, CA Posts: 98	Have any 5 lug axles for a 67 rear end? Or have inexpensive suggestions to convert to 5 from 6 lug? __________________ 67 Fleetside Shortie, small window, slip & slide tranny Upgrades--small block, tilt column, disc 5 lug conversion (front and rear), Future Projects--suburban gas tank under the bed, rear roll pan, better gas mileage (currently about 6-10 MPG)

04-18-2003, 06:08 AM	#3
MOTHERTRUCKERS Registered User Join Date: Dec 1999 Location: BRADENTON FLA Posts: 3,269	Yes we have axles or complete rearends but shipping to Ca is a killer. The cheapest way is pulling axles at bone yards or if you can't find them redrilling yours for 5 lug. __________________ Rest in Peace Ed. Thanks for all the good times.

04-19-2003, 07:39 AM	#5
MOTHERTRUCKERS Registered User Join Date: Dec 1999 Location: BRADENTON FLA Posts: 3,269	Used axles 30.00 each, new 110.00 each, shipping guess 25.00. __________________ Rest in Peace Ed. Thanks for all the good times.

04-23-2003, 05:20 PM	#6
pat Senior Member Join Date: Jul 2002 Location: Lindsay, TX Posts: 1,245	Do you have any dropped spindles or front drop springs? __________________ 68 Chevy 383/350 w/shift kit, 380hp/425ft-lbs, 4.5/5 drop, 17" TT2s 64 Cadillac Sedan DeVille

04-18-2003, 01:43 PM	#4
71custominworks Junior Member Join Date: Nov 2002 Location: Columbus, KS Posts: 83	Needing 5-lug rear axle for my 71 1/2 ton. How much to 66762?

04-23-2003, 05:53 PM	#7
MOTHERTRUCKERS Registered User Join Date: Dec 1999 Location: BRADENTON FLA Posts: 3,269	Yes we carry WESTERN drop spindles and EIBACH coils in our online catalog. __________________ Rest in Peace Ed. Thanks for all the good times.

04-23-2003, 06:46 PM	#8
HotRod929 Registered User Join Date: Mar 2002 Location: Bondurant, IA but in Worcester, MA for school Posts: 767	Do you have any drop rear leaf springs??? Thanks HotRod __________________ 1970 Chevy C-20 350 V-8 Turbo 350 w/ shift kit Dana 60 w/ 4.10 gears AND Powr-Loc POSI New Additions: Summit Headers 135amp alternator Proform HEI Edelbrock 1406 600cfm carb Sunpro Tach Powr-Loc POSI Edelbrock Performer RPM Intake MSD 6A Ignition Box AIM: HotRod929 Visit My Site: http://1970chevy.netfirms.com/

05-02-2003, 07:33 PM	#9
Iron-Butt 454 club Join Date: Oct 2002 Location: Oklahoma Posts: 1,348	are the western drop spindles good? __________________ David 1965 Chevrolet c-10 454 automatic Custom bbw swb. 1965 Chevrolet C-10 swb (Sold) 1963 Chevrolet C-10 6 Cyl automatic with dual exhaust, pb, ps and 17's. R.I.P "I will miss you. 1967 Chevrolet C-10 6 Cyl Custom lwb 1939 Chevrolet Coupe, 350 v8 automatic. 1935 Chevrolet 2 Dr Standard in the works. 2015 Harley Davidson Street Glide. 2023 Chevrolet Stingray Z51 Convertible. I never want to grow up.

05-03-2003, 06:51 AM	#10
MOTHERTRUCKERS Registered User Join Date: Dec 1999 Location: BRADENTON FLA Posts: 3,269	WESTERN is the highest quality forged spindle on the market. They are a direct bolt in with no balljoint or tierod changes or alignment needed and converts your truck to disc brakes with a 2 1/2" drop. They carry a lifetime warranty. __________________ Rest in Peace Ed. Thanks for all the good times.

05-03-2003, 07:15 AM	#11
john j Registered User Join Date: Mar 2003 Location: Newport NH Posts: 216	Has anyone "left" any 55-58 mono leafs there? __________________ you laugh at me cause i'm different ; i laugh at you cause you're the same

05-03-2003, 09:31 AM	#12
MOTHERTRUCKERS Registered User Join Date: Dec 1999 Location: BRADENTON FLA Posts: 3,269	No but we have new ones. __________________ Rest in Peace Ed. Thanks for all the good times.

05-03-2003, 10:27 AM	#13
john j Registered User Join Date: Mar 2003 Location: Newport NH Posts: 216	Sorry mother i thought you only dealt in 67-72 stuff. When the front axel gets here i will be ordering a set of mono leafs. Thanks johnj __________________ you laugh at me cause i'm different ; i laugh at you cause you're the same

05-03-2003, 09:39 PM	#14
MOTHERTRUCKERS Registered User Join Date: Dec 1999 Location: BRADENTON FLA Posts: 3,269	No problem we have parts for 41-72 just not all of them in our catalog yet. __________________ Rest in Peace Ed. Thanks for all the good times.

05-04-2003, 06:08 PM	#15
john j Registered User Join Date: Mar 2003 Location: Newport NH Posts: 216	Ok i just finished dropping the front axel and springs out. The pins a screw in type, top and bottom. With the new mono leafs will i use the same screw in type or just a regular pin? Also what about the top mount? Will i have to change to a new type of bushing? The back seem to just have a bolt type of pin it it. johnj __________________ you laugh at me cause i'm different ; i laugh at you cause you're the same



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.