![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Senior Member
![]() Join Date: Sep 2017
Location: Bryan, Texas
Posts: 2,314
|
Rear speaker mounting
How are you mounting rear speakers to these trucks.
The 48 had some custom panels welded in place when I got it. They followed the curve of the side and back of the cab. Only problem with them was I had to make a spacers to set the speakers out from the metal piece because the speaker was hitting the side of the truck and wouldn't bolt in. I can't find them anyplace. I've seen the ones from LS Fabrication, but don't know how they install and/or if there are other problems with them. Thanks.
__________________
8man-aka Robert 1948 on a S10 Frame, small block with a carb 1954 Cab, 53 Front and Bed, 50 Doors, S10 Frame, Power TBD Build thread: "]http://67-72chevytrucks.com/vboard/showthread.php?t=746899&highlight=wife%27s+48[/URL] [/URL]http://67-72chevytrucks.com/vboard/showthread.php?t=840204 |
![]() |
![]() |
![]() |
#2 |
Registered User
![]() Join Date: Feb 2020
Location: Boulder, CO
Posts: 221
|
Re: Rear speaker mounting
Curious about what others will say.
I haven't got to this point yet, but I was thinking about panel bond but I need to talk to a couple of the stereo shops. I want kick panel pods and pods in each rear corner molded to the curve of the truck. I've seen pictures with guys doing the mdf and fiberglass to fit the contour and building structure into it for the speakers of choice. Then it gets upholstery. |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Sep 2018
Location: Ontario
Posts: 822
|
Re: Rear speaker mounting
Here is what I did,
start with welding a 'tack strip' to the rear door frame. (used to attach the speaker panel) then bend a piece of 18 gauge to form the rear corner and attach to 'tack strip' and the rear support strap. Cut the 6x9 hole, and make a 'lid' for the enclosure, then insulate/carpet the entire piece up to the 'chair rail' as the carpet will 'bend' easily to fill the corner. do that to both sides, and make a rear panel (1/16 mdf) that butts up to each speaker enclosure I also added 2, 4 inch round speakers to the dash. Hope this gives you some ideas
__________________
https://67-72chevytrucks.com/vboard/...=797726&page=3http://https://67-72chevytrucks.com/...=797726&page=3 51 Chev 5 window on S10 with SBC 1958 Pontiac Wagon build https://67-72chevytrucks.com/vboard/...d.php?t=849781 |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Sep 2018
Location: Ontario
Posts: 822
|
Re: Rear speaker mounting
oops, here is the dash with the speakers
__________________
https://67-72chevytrucks.com/vboard/...=797726&page=3http://https://67-72chevytrucks.com/...=797726&page=3 51 Chev 5 window on S10 with SBC 1958 Pontiac Wagon build https://67-72chevytrucks.com/vboard/...d.php?t=849781 |
![]() |
![]() |
![]() |
#5 |
Senior Member
![]() Join Date: Sep 2017
Location: Bryan, Texas
Posts: 2,314
|
Re: Rear speaker mounting
Thanks Tempest. That looks good.
__________________
8man-aka Robert 1948 on a S10 Frame, small block with a carb 1954 Cab, 53 Front and Bed, 50 Doors, S10 Frame, Power TBD Build thread: "]http://67-72chevytrucks.com/vboard/showthread.php?t=746899&highlight=wife%27s+48[/URL] [/URL]http://67-72chevytrucks.com/vboard/showthread.php?t=840204 |
![]() |
![]() |
![]() |
#6 |
Registered User
![]() Join Date: Feb 2020
Location: Boulder, CO
Posts: 221
|
Re: Rear speaker mounting
Tempest, Nice corner work. I like the speakers behind the dash grill. I want to do the same for a mono center channel. What kind of fabric did you use across the inside of the grill?
|
![]() |
![]() |
![]() |
#7 |
Registered User
![]() Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,512
|
Re: Rear speaker mounting
The metal panels inside the corners of real 47/48 cabs are factory reinforcement because of the center cab mount on the rear of the cab. That just makes it a bit more challenging to put speakers in the corners of those cabs.
I like Tempest67'sahole setup though. That has the makings of a nice setup.
__________________
Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around. |
![]() |
![]() |
![]() |
#8 |
Senior Member
![]() Join Date: Sep 2017
Location: Bryan, Texas
Posts: 2,314
|
Re: Rear speaker mounting
Mr48, thanks for the info on those metal corners.
__________________
8man-aka Robert 1948 on a S10 Frame, small block with a carb 1954 Cab, 53 Front and Bed, 50 Doors, S10 Frame, Power TBD Build thread: "]http://67-72chevytrucks.com/vboard/showthread.php?t=746899&highlight=wife%27s+48[/URL] [/URL]http://67-72chevytrucks.com/vboard/showthread.php?t=840204 |
![]() |
![]() |
![]() |
Bookmarks |
|
|