MO Project part out lots of new parts. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

james97cobra · 07-29-2011, 09:18 PM

Well due to the Joplin tornado dropping a body shop on my 68 swb project's sheet metal, I am giving up. Here is a list of some of the stuff right off the top of my head. All parts are new unless otherwise noted. My prices are plus shipping.

Repop inner fenders $150
ECE lsx motor mounts $150
5 lug CPP drop spindles $250
Flaming river floor shift tilt column with billet knuckle $325
12 bolt with Captain fab disk brake conversion and wilwood calipers, 4.10 posi. Everything in this is fresh, including powdercoat. Never had grease in it. $1000
SWB frame with cpp c-notches installed, ready for powdercoat $300

There is a lot more that I will be posting as I get time. I have a bunch of small new stuff like tailgate hinges and trim that I will dig out soon.

m6z · 07-29-2011, 10:48 PM

first in line on the wilwood's. what color? do they come with pads? 1" or 1 1/4 rotors. I'm local so I could pick up.

VA72C10 · 07-29-2011, 10:51 PM

sorry to hear about that. Best wishes on the sale...good prices!

kingsolver72 · 07-30-2011, 12:05 AM

I know its bad down there..I have a friend that lives in Neosha and works in Joplin.

I may be interested in the the frame.Interested in more details.

james97cobra · 07-30-2011, 01:12 AM

Wilwoods are for 1 1/4" rotors and are red. Pads arent included but are only like 15 bucks at a parts store.
Posted via Mobile Device

Timbo1 · 07-30-2011, 08:37 AM

Put me in line for the Wilwood's!!!

m6z · 07-30-2011, 10:39 AM

Quote:

Originally Posted by james97cobra

Wilwoods are for 1 1/4" rotors and are red. Pads arent included but are only like 15 bucks at a parts store.
Posted via Mobile Device

I'm going to pass. I'm looking for the black ones.

eagleuh1 · 07-30-2011, 09:00 AM

Does the tank have a pump as well already? Thanks and sorry to hear about the bad luck. Jim

brownge · 07-30-2011, 09:46 AM

Interested in motor mounts. What is the ECE part #?
Posted via Mobile Device

**Todd68Chevy** · 07-30-2011, 10:05 AM

Interested in the 21 circuit universal wiring harness with switches. $200 What brand? Part # if possible. Thanks, Todd

james97cobra · 07-30-2011, 10:37 AM

Timbo- You are second on the wilwoods.

eagleuh1- The tank does already have a pump in it. I believe they install walbro gs340 pumps. It is still in the box that I got it in.

brownge- The motor mounts are the gen 3 swap kit that is on ECE's homepage.

Todd68chevy- Not sure one the harness. It is in my storage unit and i'm off work tomorrow so I will go get that info for you then.

**Todd68Chevy** · 07-30-2011, 02:57 PM

Quote:

Originally Posted by james97cobra

Todd68chevy- Not sure one the harness. It is in my storage unit and i'm off work tomorrow so I will go get that info for you then.

Sounds good, Just let me know. Thanks

**Todd68Chevy** · 08-01-2011, 09:06 AM

Quote:

Originally Posted by james97cobra

Todd68chevy- Not sure one the harness. It is in my storage unit and i'm off work tomorrow so I will go get that info for you then.

I have used Gearhead harnesses before. I believe they are very nice and great for the money. The fuse box in this one looks more stock than the cheaper 20 circuit set up. What would shipping be to a business address at zip code 47882. Thanks for your time and effort. Todd

james97cobra · 08-01-2011, 10:32 PM

Quote:

Originally Posted by Todd68Chevy

I have used Gearhead harnesses before. I believe they are very nice and great for the money. The fuse box in this one looks more stock than the cheaper 20 circuit set up. What would shipping be to a business address at zip code 47882. Thanks for your time and effort. Todd

I will do it for 10 and eat the rest. Thanks.
Posted via Mobile Device

**Todd68Chevy** · 08-02-2011, 07:14 AM

Quote:

Originally Posted by james97cobra

I will do it for 10 and eat the rest. Thanks.
Posted via Mobile Device

PM sent. Thanks, Todd

james97cobra · 07-31-2011, 07:03 PM

Quote:

Originally Posted by Todd68Chevy

Interested in the 21 circuit universal wiring harness with switches. $200 What brand? Part # if possible. Thanks, Todd

The only thing that the box said on it was that it came from Gearhead Enterprises. All the wires are color coded and labeled, and all the switches are Keep It Clean brand. It's a really nice looking set up.

bguild · 08-02-2011, 09:35 AM

I am out on the frame.. I didnt realize it was a leaf spring. I want a coil.

**Todd68Chevy** · 08-03-2011, 10:46 AM

Quote:

Originally Posted by Todd68Chevy

Interested in the 21 circuit universal wiring harness with switches. $200 What brand? Part # if possible. Thanks, Todd

Quote:

Originally Posted by james97cobra

The only thing that the box said on it was that it came from Gearhead Enterprises. All the wires are color coded and labeled, and all the switches are Keep It Clean brand. It's a really nice looking set up.

Payment sent. Thanks, Todd

eagleuh1 · 08-03-2011, 11:41 PM

Can you do $560 on the gas tank? Waiting on another group buy, but if so I'd take it. Thanks. Jim

chachi127 · 07-30-2011, 11:21 AM

If you have side mirrors let me know I might be interested. Thanks.

HavinSomeFun · 07-30-2011, 11:26 AM

is the rear diff the shorter version from the 67/68 trucks?

james97cobra · 07-30-2011, 11:31 AM

On the rear diff, I'm not sure what year it is but I do know it is wider than the 67-68.
Posted via Mobile Device

gcburdic · 07-30-2011, 11:54 AM

interested in the drop spindles....can you get me the part number for these?

james97cobra · 07-30-2011, 06:02 PM

Quote:

Originally Posted by gcburdic

interested in the drop spindles....can you get me the part number for these?

I will call cpp on monday and have them look up which ones I ordered. Thanks.
Posted via Mobile Device

bguild · 07-30-2011, 10:13 PM

I might be interested in the frame. Can you post some pictures?
Posted via Mobile Device

07-29-2011, 09:18 PM	#1
james97cobra Registered User Join Date: Jan 2011 Location: Joplin Missouri Posts: 76	Project part out lots of new parts. Well due to the Joplin tornado dropping a body shop on my 68 swb project's sheet metal, I am giving up. Here is a list of some of the stuff right off the top of my head. All parts are new unless otherwise noted. My prices are plus shipping. Repop inner fenders $150 ECE lsx motor mounts $150 5 lug CPP drop spindles $250 Flaming river floor shift tilt column with billet knuckle $325 12 bolt with Captain fab disk brake conversion and wilwood calipers, 4.10 posi. Everything in this is fresh, including powdercoat. Never had grease in it. $1000 SWB frame with cpp c-notches installed, ready for powdercoat $300 There is a lot more that I will be posting as I get time. I have a bunch of small new stuff like tailgate hinges and trim that I will dig out soon. Last edited by james97cobra; 08-14-2011 at 01:05 AM.

07-29-2011, 10:48 PM	#2
m6z Registered User Join Date: Aug 2008 Location: Pittsburg, KS Posts: 2,466	Re: Project part out lots of new parts. first in line on the wilwood's. what color? do they come with pads? 1" or 1 1/4 rotors. I'm local so I could pick up. __________________ Doug Looking for a 67-72 short bed driver.....

07-29-2011, 10:51 PM	#3
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Project part out lots of new parts. sorry to hear about that. Best wishes on the sale...good prices! __________________ Looking for a 67-72 swb or blazer project in or around VA.

07-30-2011, 12:05 AM	#4
kingsolver72 10/30/19 Join Date: Aug 2004 Location: ottawa kansas Posts: 5,208	Re: Project part out lots of new parts. I know its bad down there..I have a friend that lives in Neosha and works in Joplin. I may be interested in the the frame.Interested in more details. __________________ Fight the good fight, finish the race, keep the faith

07-30-2011, 01:12 AM	#5
james97cobra Registered User Join Date: Jan 2011 Location: Joplin Missouri Posts: 76	Re: Project part out lots of new parts. Wilwoods are for 1 1/4" rotors and are red. Pads arent included but are only like 15 bucks at a parts store. Posted via Mobile Device

07-30-2011, 08:37 AM	#6
Timbo1 Registered User Join Date: Apr 2011 Location: Gilbert Az Posts: 260	Re: Project part out lots of new parts. Put me in line for the Wilwood's!!!

07-30-2011, 09:00 AM	#8
eagleuh1 Registered User Join Date: Jul 2009 Location: Russellville, Arkansas Posts: 1,699	Re: Project part out lots of new parts. Does the tank have a pump as well already? Thanks and sorry to hear about the bad luck. Jim

07-30-2011, 09:46 AM	#9
brownge Registered User Join Date: Jun 2008 Location: Magnolia, TX Posts: 224	Re: Project part out lots of new parts. Interested in motor mounts. What is the ECE part #? Posted via Mobile Device

07-30-2011, 10:05 AM	#10
Todd68Chevy Senior Member Join Date: Oct 2009 Location: Shelburn Indiana Posts: 3,977	Re: Project part out lots of new parts. Interested in the 21 circuit universal wiring harness with switches. $200 What brand? Part # if possible. Thanks, Todd __________________ Note: All parts I have for sale are also for sale locally. I currently own: 1940 Chevy Fire truck (project), 1946 Chevy truck (project), 1946 Chevy 1 Ton pick up, 1953 Chevy school bus (storage area), 1968 Chevy C10 (I have drove for 26 years), 1994 Chevy C2500 (daily driver), 2005 GMC crew cab K2500 (parts hauler) and more trucks for parts.

07-30-2011, 10:37 AM	#11
james97cobra Registered User Join Date: Jan 2011 Location: Joplin Missouri Posts: 76	Re: Project part out lots of new parts. Timbo- You are second on the wilwoods. eagleuh1- The tank does already have a pump in it. I believe they install walbro gs340 pumps. It is still in the box that I got it in. brownge- The motor mounts are the gen 3 swap kit that is on ECE's homepage. Todd68chevy- Not sure one the harness. It is in my storage unit and i'm off work tomorrow so I will go get that info for you then.

08-02-2011, 09:35 AM	#17
bguild Registered User Join Date: Mar 2008 Location: kansas city mo Posts: 898	Re: Project part out lots of new parts. I am out on the frame.. I didnt realize it was a leaf spring. I want a coil. __________________ Project "Edna Marie"http://www.67-72chevytrucks.com/vboa...74#post5998074 Toys: 2014 Dodge Ram 1967 SHORTBED

08-03-2011, 11:41 PM	#19
eagleuh1 Registered User Join Date: Jul 2009 Location: Russellville, Arkansas Posts: 1,699	Re: Project part out lots of new parts. Can you do $560 on the gas tank? Waiting on another group buy, but if so I'd take it. Thanks. Jim

07-30-2011, 11:21 AM	#20
chachi127 Registered User Join Date: Jan 2006 Location: Racine, WI Posts: 73	Re: Project part out lots of new parts. If you have side mirrors let me know I might be interested. Thanks. __________________ 1972 GMC 'Project Red' Long Road Ahead

07-30-2011, 11:26 AM	#21
HavinSomeFun Still Just Havin Some Fun! Join Date: Jun 2007 Location: Piedmont, Oklahoma Posts: 1,145	Re: Project part out lots of new parts. is the rear diff the shorter version from the 67/68 trucks? __________________ a green one with some stuff done to it....

07-30-2011, 11:31 AM	#22
james97cobra Registered User Join Date: Jan 2011 Location: Joplin Missouri Posts: 76	Re: Project part out lots of new parts. On the rear diff, I'm not sure what year it is but I do know it is wider than the 67-68. Posted via Mobile Device



Register or Log In To remove these advertisements.

07-30-2011, 11:54 AM	#23
gcburdic Restoration Virgin! Join Date: Jan 2008 Location: Huntersville, NC Posts: 8,298	Re: Project part out lots of new parts. interested in the drop spindles....can you get me the part number for these? __________________ Geoff with a G 1968 Chevy C10 SWB The Mistress 1972 Custom Deluxe C20 Suburban A Suburban Named Isabella 1966 Ford Mustang Mama's High School Graduation Present

07-30-2011, 10:13 PM	#25
bguild Registered User Join Date: Mar 2008 Location: kansas city mo Posts: 898	Re: Project part out lots of new parts. I might be interested in the frame. Can you post some pictures? Posted via Mobile Device __________________ Project "Edna Marie"http://www.67-72chevytrucks.com/vboa...74#post5998074 Toys: 2014 Dodge Ram 1967 SHORTBED

Register or Log In To remove these advertisements.