OR 1971 K20 parts F/S - The 1947 - Present Chevrolet & GMC Truck Message Board Network

DLTruck1973 · 01-08-2015, 09:48 PM

Jan 6 at 5:10 PM
First thanks for looking. DLTruck1973 is a combined effort between myself "tll74" and "TBONE1964" both certainly no strangers to this site. I (Tom) have bought out my family of our family owned business D & L Truck Parts very recently. We will be offering parts from all of our Chevy/GMC trucks. I personally have a stock pile of 67-72 trucks that we will be listing as they get parted out plus many loose parts from many past trucks. Thomas aka "TBONE1964" will be handling the listing and selling of the parts. I have been selling parts for years here on the site but have been struggling finding time and keeping up with request from members. This combined effort hopefully will resolve that problem. It's our hope and wish that we can provide excellent service and parts to you fellow truck enthusiasts.

To avoid possible confusion, we ask that you try to respond in the thread(s) for parts listed with in the thread.

Shipping via UPS, USPS, and freight truck.

Payment via Paypal, MO, and cards over phone.

This thread shares common parts for K20 Pickups and Suburbans. Note: these parts were removed from a Suburban. There will be a separate thread posted with Suburban parts only very soon. Some parts may not be in the photos but available.

Photo 1
Hood latch...15.00
Hood latch striker...10.00
Grill support center...10.00
Grill support left...10.00
Fender/Radiator support "triangles"...7.50
Park light lenses...12.50 each
Washer hoses with firewall pass through grommet...12.50
Upper radiator hose pipe (best one I've had or seen)...85.00 SOLD
Emergency brake cables (front cable, interm.cable, frame brackets, support rods, and couplers)...75.00 SOLD
Front cross member...25.00
Left and right brake calipers...25.00 each
Fan spacer...7.50 SOLD
Front bumper brackets 71-72 4x4 only...22.50 each SOLD
Steering shaft (intermediate)...25.00
Wiper transmissions...12.50 each
Brake line set (front 4x4 only)...40.00
Inspection cover...15.00
Tin flywheel cover typical split at top starter hole...10.00
Bell crank with pivot stud on block, frame bracket, rod to fork...30.00
Gas peddle assembly 71-72...28.00 SOLD
Master cylinder with proportioning valve...30.00 SOLD
Flywheel...25.00
Front stabilizer shock with mounting hardware (aftermarket) shock probably wore out....12.50
Engine cross member been tanked and acid dipped nice...75.00 SOLD
Transmission cross member...65.00
Body mount brackets / all...
Front spring hangers/core support mounts...40.00 each $75.00 for a pair
Front axle bump stops bumpers with brackets...10.00 each
Front spring shackles...12.50 each
Photo 2
Front axle shaft LH 71-early 72(small u-joint) needs u-joint, some wear on pocket bearing surface... 60.00
Front axle shaft RH 71-early 72 (small u-joint) nice...75.00
Engine mounts...5.00 each SOLD
Transmission/transfer case mounts (mounts on cross member) original and complete...45.00
Front spring rear hangers for shackles...20.00 each
Front leaf springs pair...125.00
Door hinges, front doors and rear door...
Front upper shock brackets...5.00 each
Rear drive shaft some play in splines...75.00
Rear axle bump stops with brackets...12.50 each
Rear spring hangers (front)...30.00 each
Photo 3
Windshield rubber and trim ding in trim RH lower corner nice otherwise...65.00
Rear HO72 differential housing tanked still original factory markings...125.00
Rear differential housing cover...22.00 SOLD
Floor hump 4sp/t-case...30.00 SOLD
Park brake assembly...22.50
TH350 4x4 shift linkage complete... 50.00
Door relay RH...10.00
Speedometer cable 4x4 ...25.00
Blower motor...15.00
Alternator bracket set...40.00
Washer bottle bracket...5.00
Upper trim for door panels...10.00 each
Inside mirror hazy glass otherwise very nice...20.00
Outside (2) RH door handles average DQ, one pitted other kinda dull...20.00 each
Window cranks...7.50 each
Door release handles...7.50 each
Lower side vents with handles and knobs...22.50 each SOLD PASS SIDE
Wiper motor very nice paint...25.00
Under dash wiring harness 4sp/gauges very nice...65.00
Front light harness 71-72 one wire spliced...40.00
Front RH park light housing...10.00
Engine harness (for manual trans) bad ends on starter and temp... 20.00
Brake/Clutch pedal bracket assy...40.00
Steering Column...65.00 (SOLD)
Defrost vents...10.00 each SOLD

**richard2717** · 01-08-2015, 09:53 PM

condition of steering column and shipping cost to 21801 business. Also verify it is a floor shift column.

Thanks
Richard

teeitup · 01-08-2015, 09:57 PM

CONGRATS Tom and Tom!!!!!!!!!!!!!! You guys will do awesome together!!!!!!!

DLTruck1973 · 01-08-2015, 10:23 PM

Quote:

Originally Posted by teeitup

CONGRATS Tom and Tom!!!!!!!!!!!!!! You guys will do awesome together!!!!!!!

Thank you Randy,

That means a lot coming from you. The master is teaching me well

Take care,
Thomas

DLTruck1973 · 01-08-2015, 10:21 PM

Quote:

Originally Posted by richard2717

condition of steering column and shipping cost to 21801 business. Also verify it is a floor shift column.

Thanks
Richard

Richard,

the column is for a floor shift and it is real nice for a driver. I can get you a price shipped tomorrow.

Thank you,
Thomas

DLTruck1973 · 01-09-2015, 02:56 PM

Quote:

Originally Posted by DLTruck1973

Richard,

the column is for a floor shift and it is real nice for a driver. I can get you a price shipped tomorrow.

Thank you,
Thomas

Richard,

With shipping, the column will be $93.00.

Let me know,

Thank you,
Thomas

**richard2717** · 01-09-2015, 04:37 PM

Quote:

Originally Posted by DLTruck1973

Richard,

With shipping, the column will be $93.00.

Let me know,

Thank you,
Thomas

Thomas
I will take it

PM me with payment address to send money order. Thanks

Richard

DLTruck1973 · 01-09-2015, 05:13 PM

Quote:

Originally Posted by richard2717

Thomas
I will take it

PM me with payment address to send money order. Thanks

Richard

PM sent

**richard2717** · 01-21-2015, 02:58 PM

Quote:

Originally Posted by richard2717

Thomas
I will take it

PM me with payment address to send money order. Thanks

Richard

Got the column today. Looks good. Thanks Again
Richard

**undertaker72** · 01-08-2015, 10:15 PM

depending on postage or freight, and a pic of
4 speed transhper trans cover 30.00
id like that the front crosmember ,75.00-- does it have upper and lower pieces
and the mt mounts 5.00 each

my zip 84648

DLTruck1973 · 01-08-2015, 10:30 PM

Quote:

Originally Posted by undertaker72

depending on postage or freight, and a pic of
4 speed transhper trans cover 30.00
id like that the front crosmember ,75.00-- does it have upper and lower pieces
and the mt mounts 5.00 each

my zip 84648

I can get you a shipping quote tomorrow. When you say "front crossmember" you are asking for the engine crossmember correct? Yes it will come complete.

Thank you,
Thomas

**undertaker72** · 01-08-2015, 10:50 PM

Quote:

Originally Posted by DLTruck1973

I can get you a shipping quote tomorrow. When you say "front crossmember" you are asking for the engine crossmember correct? Yes it will come complete.

Thank you,
Thomas

correct

**DeadheadNM** · 01-09-2015, 01:28 AM

Condition/shipped cost to 59901 of the master cylinder, prop valve, and MC to prop valve lines - mostly need the lines but will consider whole package. Thanks,

1972 Jimmy · 01-09-2015, 06:54 AM

I'll take the front 4x4 bumper brackets and upper radiator tube for a 1972!
Thanks,
Eric

DLTruck1973 · 01-09-2015, 07:10 PM

Quote:

Originally Posted by 1972 Jimmy

I'll take the front 4x4 bumper brackets and upper radiator tube for a 1972!
Thanks,
Eric

Hi Eric,

$20.00 for shipping.

The brackets are $36.00 for the pair and $85.00 for the radiator pipe. All total with shipping is $141.00. Let me know and I can get them ready to ship.

Thank you,
Thomas

1972 Jimmy · 01-09-2015, 07:56 PM

Quote:

Originally Posted by DLTruck1973

Hi Eric,

$20.00 for shipping.

The brackets are $36.00 for the pair and $85.00 for the radiator pipe. All total with shipping is $141.00. Let me know and I can get them ready to ship.

Thank you,
Thomas

Pm sent.

DLTruck1973 · 01-09-2015, 08:18 PM

Quote:

Originally Posted by 1972 Jimmy

Pm sent.

PM sent,

Thank you,
Thomas

1972 Jimmy · 01-19-2015, 05:50 PM

Thomas,
Recieved the Bumper brackets and Radiator tube this afternoon. Wow are they nice!! Very impressed!

Thanks again,
Eric

Quote:

Originally Posted by DLTruck1973

Hi Eric,

$20.00 for shipping.

The brackets are $36.00 for the pair and $85.00 for the radiator pipe. All total with shipping is $141.00. Let me know and I can get them ready to ship.

Thank you,
Thomas

DLTruck1973 · 01-19-2015, 05:53 PM

Quote:

Originally Posted by 1972 Jimmy

Thomas,
Recieved the Bumper brackets and Radiator tube this afternoon. Wow are they nice!! Very impressed!

Thanks again,
Eric

Glad to hear that Eric,

That radiator tube is the nicest one I have ever seen. Glad you got them OK.

Thank you again for the business.
We appreciate it,
Thomas

DLTruck1973 · 01-09-2015, 03:04 PM

Quote:

Originally Posted by DeadheadNM

Condition/shipped cost to 59901 of the master cylinder, prop valve, and MC to prop valve lines - mostly need the lines but will consider whole package. Thanks,

Hi Pete,

I can sell you the proportioning valve with the two short lines. I would rather not split the lines from the valve. The master has no real value so the price is still $30.00. I can ship without the master for $10.00 for a total of $40.00.

Let me know and I can get them ready to ship

Thank you,
Thomas

**DeadheadNM** · 01-09-2015, 03:27 PM

Quote:

Originally Posted by DLTruck1973

Hi Pete,

I can sell you the proportioning valve with the two short lines. I would rather not split the lines from the valve. The master has no real value so the price is still $30.00. I can ship without the master for $10.00 for a total of $40.00.

Let me know and I can get them ready to ship

Thank you,
Thomas

Thanks Tom - I'll take the prop valve and lines if all looks to be good. Will send you a PM now re: payment. Pete

**D.PASSMORE** · 01-09-2015, 07:51 AM

Does the HO72 cover come with good drain plug? Ill take it pending info...
And the fan spacer, can you measure, Ill take it pending info...

DLTruck1973 · 01-09-2015, 01:26 PM

Quote:

Originally Posted by D.PASSMORE

Does the HO72 cover come with good drain plug? Ill take it pending info...
And the fan spacer, can you measure, Ill take it pending info...

The drain plug on this cover is in excellent condition, no rounded corners. The fan spacer is 1 1/2 thick and 1 1/2 inch bolt center.

Let me know,

Thank you,
Thomas

Minnz · 01-09-2015, 09:44 AM

I'll take the passenger side Lower side vent with handle and knob. My zip is 55443.

Thanks!
Lee

DLTruck1973 · 01-09-2015, 03:06 PM

Quote:

Originally Posted by Minnz

I'll take the passenger side Lower side vent with handle and knob. My zip is 55443.

Thanks!
Lee

I can get this to you in a flat rate envelope, padded well for $27.75 shipped.

Let me know,

Thank you,
Thomas

01-08-2015, 09:48 PM	#1
DLTruck1973 Registered User Join Date: Jan 2015 Location: Junction City OR Posts: 1,758	1971 K20 parts F/S Jan 6 at 5:10 PM First thanks for looking. DLTruck1973 is a combined effort between myself "tll74" and "TBONE1964" both certainly no strangers to this site. I (Tom) have bought out my family of our family owned business D & L Truck Parts very recently. We will be offering parts from all of our Chevy/GMC trucks. I personally have a stock pile of 67-72 trucks that we will be listing as they get parted out plus many loose parts from many past trucks. Thomas aka "TBONE1964" will be handling the listing and selling of the parts. I have been selling parts for years here on the site but have been struggling finding time and keeping up with request from members. This combined effort hopefully will resolve that problem. It's our hope and wish that we can provide excellent service and parts to you fellow truck enthusiasts. To avoid possible confusion, we ask that you try to respond in the thread(s) for parts listed with in the thread. Shipping via UPS, USPS, and freight truck. Payment via Paypal, MO, and cards over phone. This thread shares common parts for K20 Pickups and Suburbans. Note: these parts were removed from a Suburban. There will be a separate thread posted with Suburban parts only very soon. Some parts may not be in the photos but available. Photo 1 Hood latch...15.00 Hood latch striker...10.00 Grill support center...10.00 Grill support left...10.00 Fender/Radiator support "triangles"...7.50 Park light lenses...12.50 each Washer hoses with firewall pass through grommet...12.50 Upper radiator hose pipe (best one I've had or seen)...85.00 SOLD Emergency brake cables (front cable, interm.cable, frame brackets, support rods, and couplers)...75.00 SOLD Front cross member...25.00 Left and right brake calipers...25.00 each Fan spacer...7.50 SOLD Front bumper brackets 71-72 4x4 only...22.50 each SOLD Steering shaft (intermediate)...25.00 Wiper transmissions...12.50 each Brake line set (front 4x4 only)...40.00 Inspection cover...15.00 Tin flywheel cover typical split at top starter hole...10.00 Bell crank with pivot stud on block, frame bracket, rod to fork...30.00 Gas peddle assembly 71-72...28.00 SOLD Master cylinder with proportioning valve...30.00 SOLD Flywheel...25.00 Front stabilizer shock with mounting hardware (aftermarket) shock probably wore out....12.50 Engine cross member been tanked and acid dipped nice...75.00 SOLD Transmission cross member...65.00 Body mount brackets / all... Front spring hangers/core support mounts...40.00 each $75.00 for a pair Front axle bump stops bumpers with brackets...10.00 each Front spring shackles...12.50 each Photo 2 Front axle shaft LH 71-early 72(small u-joint) needs u-joint, some wear on pocket bearing surface... 60.00 Front axle shaft RH 71-early 72 (small u-joint) nice...75.00 Engine mounts...5.00 each SOLD Transmission/transfer case mounts (mounts on cross member) original and complete...45.00 Front spring rear hangers for shackles...20.00 each Front leaf springs pair...125.00 Door hinges, front doors and rear door... Front upper shock brackets...5.00 each Rear drive shaft some play in splines...75.00 Rear axle bump stops with brackets...12.50 each Rear spring hangers (front)...30.00 each Photo 3 Windshield rubber and trim ding in trim RH lower corner nice otherwise...65.00 Rear HO72 differential housing tanked still original factory markings...125.00 Rear differential housing cover...22.00 SOLD Floor hump 4sp/t-case...30.00 SOLD Park brake assembly...22.50 TH350 4x4 shift linkage complete... 50.00 Door relay RH...10.00 Speedometer cable 4x4 ...25.00 Blower motor...15.00 Alternator bracket set...40.00 Washer bottle bracket...5.00 Upper trim for door panels...10.00 each Inside mirror hazy glass otherwise very nice...20.00 Outside (2) RH door handles average DQ, one pitted other kinda dull...20.00 each Window cranks...7.50 each Door release handles...7.50 each Lower side vents with handles and knobs...22.50 each SOLD PASS SIDE Wiper motor very nice paint...25.00 Under dash wiring harness 4sp/gauges very nice...65.00 Front light harness 71-72 one wire spliced...40.00 Front RH park light housing...10.00 Engine harness (for manual trans) bad ends on starter and temp... 20.00 Brake/Clutch pedal bracket assy...40.00 Steering Column...65.00 (SOLD) Defrost vents...10.00 each SOLD Attached Images Last edited by DLTruck1973; 02-02-2015 at 01:35 PM.

01-08-2015, 09:53 PM	#2
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,091	Re: 1971 K20 parts F/S condition of steering column and shipping cost to 21801 business. Also verify it is a floor shift column. Thanks Richard __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

01-08-2015, 09:57 PM	#3
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 1971 K20 parts F/S CONGRATS Tom and Tom!!!!!!!!!!!!!! You guys will do awesome together!!!!!!! __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-08-2015, 10:15 PM	#10
undertaker72 Senior Member Join Date: Dec 2013 Location: nephi , utah Posts: 2,308	Re: 1971 K20 parts F/S depending on postage or freight, and a pic of 4 speed transhper trans cover 30.00 id like that the front crosmember ,75.00-- does it have upper and lower pieces and the mt mounts 5.00 each my zip 84648

01-09-2015, 01:28 AM	#13
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,422	Re: 1971 K20 parts F/S Condition/shipped cost to 59901 of the master cylinder, prop valve, and MC to prop valve lines - mostly need the lines but will consider whole package. Thanks, __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

01-09-2015, 06:54 AM	#14
1972 Jimmy Registered User Join Date: Nov 2012 Location: Freeland, Michigan Posts: 1,385	Re: 1971 K20 parts F/S I'll take the front 4x4 bumper brackets and upper radiator tube for a 1972! Thanks, Eric Last edited by 1972 Jimmy; 01-09-2015 at 07:00 AM.

01-09-2015, 07:51 AM	#22
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,054	Re: 1971 K20 parts F/S Does the HO72 cover come with good drain plug? Ill take it pending info... And the fan spacer, can you measure, Ill take it pending info... __________________ DAVID PASSMORE ST AUGUSTINE ,FL ZIP 32084 '71 SWB K/10 CUSTOM DELUXE (Chili) '72 BLAZER K/5 Muscle Truck (Mule) '72 LWB K/20 CHEYENNE (Blackie)

01-09-2015, 09:44 AM	#24
Minnz Registered User Join Date: Aug 2014 Location: Minneapolis, MN Posts: 254	Re: 1971 K20 parts F/S I'll take the passenger side Lower side vent with handle and knob. My zip is 55443. Thanks! Lee __________________ 72 Ochre Blazer 69 Camaro Z28 Garnet Red 48 Willys (rolled)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.